Dan,
? I thought the "/etc/init.d/wimax {start|stop|status}" command was how you run it manually. Or am I mistaken?
?
-Brandon
--- On Wed, 11/18/09, Dan Williams <dcbw at redhat.com> wrote:
From: Dan Williams <dcbw at redhat.com>
Subject: Re: Intel 5350 Firmware Download Issue
To: "Brandon Dell" <stymiecc04 at yahoo.com>
Cc: "Inaky Perez-Gonzalez" <inaky at linux.intel.com>, wimax at linuxwimax.org
Date: Wednesday, November 18, 2009, 4:27 PM
> On Wed, 2009-11-18 at 11:47 -0800, Brandon Dell wrote:
> Hi,
>???So as I last mentioned I am able to see the "wmx0" interface when I type ifconfig. Now I have run into a new issue.? I installed the Intel Binary Supplicant and Network Service.? However when I enter "/etc/init.d/wimax start" the service starts up then stops running after a few seconds.? Without this daemon running I cannot issue any wimaxcu commands.
>?
> Any ideas?
Have you tried running the service manually to find out why it's quitting?
Dan
> Thanks,
> Brandon
>
> --- On Wed, 11/18/09, Brandon Dell <stymiecc04 at yahoo.com> wrote:
>
>
>? ? ? ???From: Brandon Dell <stymiecc04 at yahoo.com>
>? ? ? ???Subject: Re: Intel 5350 Firmware Download Issue
>? ? ? ???To: "Jerone Young" <jerone.young at canonical.com>, "Inaky Perez-Gonzalez" <inaky at linux.intel.com>
>? ? ? ???Cc: wimax at linuxwimax.org
>? ? ? ???Date: Wednesday, November 18, 2009, 7:14 AM
>? ? ? ???
>? ? ? ???Hi all,
>???Yesterday I rebuilt my kernel using 2.6.29 from kernel.org and the card is being recognized now.? I am going to investigate what differences, if any, there are between 2.6.29 and 2.6.31.
>?
> Thanks for all you guys' help,
> Brandon
>
> --- On Tue, 11/17/09, Inaky Perez-Gonzalez <inaky at linux.intel.com> wrote:
>
>
>? ? ? ???From: Inaky Perez-Gonzalez <inaky at linux.intel.com>
>? ? ? ???Subject: Re: Intel 5350 Firmware Download Issue
>? ? ? ???To: "Jerone Young" <jerone.young at canonical.com>
>? ? ? ???Cc: "Brandon Dell" <stymiecc04 at yahoo.com>, wimax at linuxwimax.org
>? ? ? ???Date: Tuesday, November 17, 2009, 5:48 PM
>? ? ? ???
>? ? ? ???On Tue, 2009-11-17 at 14:56 -0600, Jerone Young wrote:
>? ? ? ???> Are you testing with kernels 2.6.31 & greater? Apparently according to
>? ? ? ???> Kevin it works with 2.6.30 & below.
>? ? ? ???
>? ? ? ???Yeap, I do. my tree is in 2.6.32-rc3
>? ? ? ???
>? ? ? ???
>? ? ? ???
>? ? ? ???
>? ? ? ???
>? ? ? ???
>? ? ? ???
>? ? ? ???
>? ? ? ???-----Inline Attachment Follows-----
>? ? ? ???
>? ? ? ???_______________________________________________
>? ? ? ???wimax mailing list
>? ? ? ???wimax at linuxwimax.org
>? ? ? ???http://lists.linuxwimax.org/listinfo/wimax
>? ? ? ???
> >
> > _______________________________________________
> > wimax mailing list
> > wimax at linuxwimax.org
> > http://lists.linuxwimax.org/listinfo/wimax
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxwimax.org/pipermail/wimax/attachments/20091119/a2cf8a69/attachment.html>
