This patch provides the Makefile and KConfig for the i2400m driver, integrating them into the WiMAX stack's Makefile and Kconfig. Signed-off-by: Inaky Perez-Gonzalez <inaky@xxxxxxxxxxxxxxx> --- drivers/net/Kconfig | 2 + drivers/net/Makefile | 1 + drivers/net/wimax/Kconfig | 17 +++++++++++++ drivers/net/wimax/Makefile | 2 + drivers/net/wimax/i2400m/Kconfig | 49 +++++++++++++++++++++++++++++++++++++ drivers/net/wimax/i2400m/Makefile | 29 ++++++++++++++++++++++ 6 files changed, 100 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wimax/Kconfig create mode 100644 drivers/net/wimax/Makefile create mode 100644 drivers/net/wimax/i2400m/Kconfig create mode 100644 drivers/net/wimax/i2400m/Makefile diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 11f143f..f413d58 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2584,6 +2584,8 @@ source "drivers/net/tokenring/Kconfig" source "drivers/net/wireless/Kconfig" +source "drivers/net/wimax/Kconfig" + source "drivers/net/usb/Kconfig" source "drivers/net/pcmcia/Kconfig" diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f19acf8..3ac378f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -262,3 +262,4 @@ obj-$(CONFIG_NIU) += niu.o obj-$(CONFIG_VIRTIO_NET) += virtio_net.o obj-$(CONFIG_SFC) += sfc/ +obj-y += wimax/ diff --git a/drivers/net/wimax/Kconfig b/drivers/net/wimax/Kconfig new file mode 100644 index 0000000..30347e4 --- /dev/null +++ b/drivers/net/wimax/Kconfig @@ -0,0 +1,17 @@ +# +# WiMAX LAN device drivers configuration +# + + +comment "Enable WiMAX (Networking options) to see the WiMAX drivers" + depends on WIMAX = n + +if WIMAX + +menu "WiMAX Wireless Broadband devices" + +source "drivers/net/wimax/i2400m/Kconfig" + +endmenu + +endif diff --git a/drivers/net/wimax/Makefile b/drivers/net/wimax/Makefile new file mode 100644 index 0000000..bda9430 --- /dev/null +++ b/drivers/net/wimax/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_WIMAX_I2400M) += i2400m/ diff --git a/drivers/net/wimax/i2400m/Kconfig b/drivers/net/wimax/i2400m/Kconfig new file mode 100644 index 0000000..e977c46 --- /dev/null +++ b/drivers/net/wimax/i2400m/Kconfig @@ -0,0 +1,49 @@ + +config WIMAX_I2400M + tristate + depends on WIMAX + select FW_LOADER + +comment "Enable USB support to see WiMAX USB drivers" + depends on USB = n + +comment "Enable MMC support to see WiMAX SDIO drivers" + depends on MMC = n + +config WIMAX_I2400M_USB + tristate "Intel Wireless WiMAX Connection 2400 over USB (including 5x50)" + depends on WIMAX && USB + select WIMAX_I2400M + help + Select if you have a device based on the Intel WiMAX + Connection 2400 over USB (like any of the Intel Wireless + WiMAX/WiFi Link 5x50 series). + + If unsure, it is safe to select M (module). + +config WIMAX_I2400M_SDIO + tristate "Intel Wireless WiMAX Connection 2400 over SDIO" + depends on WIMAX && MMC + select WIMAX_I2400M + help + Select if you have a device based on the Intel WiMAX + Connection 2400 over SDIO. + + If unsure, it is safe to select M (module). + +config WIMAX_I2400M_DEBUG_LEVEL + int "WiMAX i2400m debug level" + depends on WIMAX_I2400M + default 8 + help + + Select the maximum debug verbosity level to be compiled into + the WiMAX i2400m driver code. + + By default, this is disabled at runtime and can be + selectively enabled at runtime for different parts of the + code using the sysfs debug-levels file. + + If set at zero, this will compile out all the debug code. + + It is recommended that it is left at 8. diff --git a/drivers/net/wimax/i2400m/Makefile b/drivers/net/wimax/i2400m/Makefile new file mode 100644 index 0000000..2e8c15b --- /dev/null +++ b/drivers/net/wimax/i2400m/Makefile @@ -0,0 +1,29 @@ + +obj-$(CONFIG_WIMAX_I2400M) += i2400m.o +obj-$(CONFIG_WIMAX_I2400M_USB) += i2400m-usb.o +obj-$(CONFIG_WIMAX_I2400M_SDIO) += i2400m-sdio.o + +i2400m-objs := \ + control.o \ + driver.o \ + fw.o \ + op-rfkill.o \ + netdev.o \ + tx.o \ + rx.o + +i2400m-$(CONFIG_DEBUG_FS) += debugfs.o + +i2400m-usb-objs := \ + usb-fw.o \ + usb-notif.o \ + usb-tx.o \ + usb-rx.o \ + usb.o + + +i2400m-sdio-objs := \ + sdio.o \ + sdio-tx.o \ + sdio-fw.o \ + sdio-rx.o -- 1.5.6.5
