On 11/6/24 02:47, Yassine Oudjana wrote:
Clear the IRQ enable bit of WDT_MODE before asserting software reset
in order to make TOPRGU issue a system reset signal instead of an IRQ.
Fixes: a44a45536f7b ("watchdog: Add driver for Mediatek watchdog")
Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/watchdog/mtk_wdt.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index c35f85ce8d69c..e2d7a57d6ea2e 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -225,9 +225,15 @@ static int mtk_wdt_restart(struct watchdog_device *wdt_dev,
{
struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev);
void __iomem *wdt_base;
+ u32 reg;
wdt_base = mtk_wdt->wdt_base;
+ /* Enable reset in order to issue a system reset instead of an IRQ */
+ reg = readl(wdt_base + WDT_MODE);
+ reg &= ~WDT_MODE_IRQ_EN;
+ writel(reg | WDT_MODE_KEY, wdt_base + WDT_MODE);
+
while (1) {
writel(WDT_SWRST_KEY, wdt_base + WDT_SWRST);
mdelay(5);
