[PATCH 1/2] watchdog: imx7ulp_wdt: Clarify timing units

[Stefan Wahren <wahrenst@xxxxxxx>]

imx7ulp_wdt mixes a lot of timing units (frequency, clocks, seconds)
in a not obvious way. So improve readability of imx7ulp_wdt by
clarifying the relevant units.

Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
---
 drivers/watchdog/imx7ulp_wdt.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
index 0f13a3053357..0f92d2217088 100644
--- a/drivers/watchdog/imx7ulp_wdt.c
+++ b/drivers/watchdog/imx7ulp_wdt.c
@@ -19,7 +19,7 @@
 #define WDOG_CS_PRES		BIT(12)
 #define WDOG_CS_ULK		BIT(11)
 #define WDOG_CS_RCS		BIT(10)
-#define LPO_CLK			0x1
+#define LPO_CLK			0x1	/* 32 kHz */
 #define LPO_CLK_SHIFT		8
 #define WDOG_CS_CLK		(LPO_CLK << LPO_CLK_SHIFT)
 #define WDOG_CS_EN		BIT(7)
@@ -39,8 +39,8 @@
 #define UNLOCK_SEQ1	0xD928
 #define UNLOCK		((UNLOCK_SEQ1 << 16) | UNLOCK_SEQ0)

-#define DEFAULT_TIMEOUT	60
-#define MAX_TIMEOUT	128
+#define DEFAULT_TIMEOUT	60	/* seconds */
+#define MAX_TIMEOUT	128	/* seconds */
 #define WDOG_CLOCK_RATE	1000
 #define WDOG_ULK_WAIT_TIMEOUT	1000
 #define WDOG_RCS_WAIT_TIMEOUT	10000
@@ -240,7 +240,8 @@ static const struct watchdog_info imx7ulp_wdt_info = {
 		    WDIOF_MAGICCLOSE,
 };

-static int _imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt, unsigned int timeout, unsigned int cs)
+static int _imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt,
+			     unsigned int timeout_clks, unsigned int cs)
 {
 	u32 val;
 	int ret;
@@ -263,7 +264,7 @@ static int _imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt, unsigned int timeou
 		goto init_out;

 	/* set an initial timeout value in TOVAL */
-	writel(timeout, wdt->base + WDOG_TOVAL);
+	writel(timeout_clks, wdt->base + WDOG_TOVAL);
 	writel(cs, wdt->base + WDOG_CS);
 	local_irq_enable();
 	ret = imx7ulp_wdt_wait_rcs(wdt);
@@ -275,7 +276,8 @@ static int _imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt, unsigned int timeou
 	return ret;
 }

-static int imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt, unsigned int timeout)
+static int imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt,
+			    unsigned int timeout_clks)
 {
 	/* enable 32bit command sequence and reconfigure */
 	u32 val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE |
@@ -296,11 +298,11 @@ static int imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt, unsigned int timeout
 	}

 	do {
-		ret = _imx7ulp_wdt_init(wdt, timeout, val);
+		ret = _imx7ulp_wdt_init(wdt, timeout_clks, val);
 		toval = readl(wdt->base + WDOG_TOVAL);
 		cs = readl(wdt->base + WDOG_CS);
 		cs &= ~(WDOG_CS_FLG | WDOG_CS_ULK | WDOG_CS_RCS);
-	} while (--loop > 0 && (cs != val || toval != timeout || ret));
+	} while (--loop > 0 && (cs != val || toval != timeout_clks || ret));

 	if (loop == 0)
 		return -EBUSY;
--
2.34.1