For the watchdog timer to work properly on the QCML04 board we need to
set PWRGD enable in the Environment Controller Configuration Registers
Special Configuration Register 1 when it is not already set, this may
be the case when the watchdog is not enabled from within the BIOS.
Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
---
Changes v1 -> v2:
- remove QGLK02/IT87_WDT_BROKEN
---
drivers/watchdog/it87_wdt.c | 44 +++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index 3e8c15138edd..b8be9af065b2 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -20,6 +20,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -40,6 +41,7 @@
#define VAL 0x2f
/* Logical device Numbers LDN */
+#define EC 0x04
#define GPIO 0x07
/* Configuration Registers and Functions */
@@ -73,6 +75,12 @@
#define IT8784_ID 0x8784
#define IT8786_ID 0x8786
+/* Environment Controller Configuration Registers LDN=0x04 */
+#define SCR1 0xfa
+
+/* Environment Controller Bits SCR1 */
+#define WDT_PWRGD 0x20
+
/* GPIO Configuration Registers LDN=0x07 */
#define WDTCTRL 0x71
#define WDTCFG 0x72
@@ -240,6 +248,20 @@ static int wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
return ret;
}
+enum {
+ IT87_WDT_OUTPUT_THROUGH_PWRGD = BIT(0),
+};
+
+static const struct dmi_system_id it8786_quirks[] = {
+ {
+ /* Qotom Q30900P */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "QCML04"),
+ },
+ .driver_data = (void *)IT87_WDT_OUTPUT_THROUGH_PWRGD,
+ }
+};
+
static const struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
.firmware_version = 1,
@@ -261,8 +283,10 @@ static struct watchdog_device wdt_dev = {
static int __init it87_wdt_init(void)
{
+ const struct dmi_system_id *dmi_id;
u8 chip_rev;
u8 ctrl;
+ int quirks = 0;
int rc;
rc = superio_enter();
@@ -273,6 +297,17 @@ static int __init it87_wdt_init(void)
chip_rev = superio_inb(CHIPREV) & 0x0f;
superio_exit();
+ switch (chip_type) {
+ case IT8786_ID:
+ dmi_id = dmi_first_match(it8786_quirks);
+ break;
+ default:
+ dmi_id = NULL;
+ }
+
+ if (dmi_id)
+ quirks = (long)dmi_id->driver_data;
+
switch (chip_type) {
case IT8702_ID:
max_units = 255;
@@ -333,6 +368,15 @@ static int __init it87_wdt_init(void)
superio_outb(0x00, WDTCTRL);
}
+ if (quirks & IT87_WDT_OUTPUT_THROUGH_PWRGD) {
+ superio_select(EC);
+ ctrl = superio_inb(SCR1);
+ if (!(ctrl & WDT_PWRGD)) {
+ ctrl |= WDT_PWRGD;
+ superio_outb(ctrl, SCR1);
+ }
+ }
+
superio_exit();
if (timeout < 1 || timeout > max_units * 60) {
--
2.34.1
