Re: [PATCH v2] iTCO_wdt: mask NMI_NOW bit for update_no_reboot_bit() call

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/12/24 07:19, Oleksandr Ocheretnyi wrote:
Commit da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake
PCH iTCO") does not mask NMI_NOW bit during TCO1_CNT register's
value comparison for update_no_reboot_bit() call causing following
failure:

    ...
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device
                                     disabled by hardware/BIOS
    ...

and this can lead to unexpected NMIs later during regular
crashkernel's workflow because of watchdog probe call failures.

This change masks NMI_NOW bit for TCO1_CNT register values to
avoid unexpected NMI_NOW bit inversions.

Fixes: da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake PCH iTCO")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@xxxxxxxxx>
---
  drivers/watchdog/iTCO_wdt.c | 23 +++++++++++++++++++----
  1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 264857d314da..46c09359588f 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -82,6 +82,12 @@
  #define TCO2_CNT(p)	(TCOBASE(p) + 0x0a) /* TCO2 Control Register	*/
  #define TCOv2_TMR(p)	(TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/
+/* NMI_NOW is bit 8 of TCO1_CNT register
+ * Read/Write
+ * This bit is implemented as RW but has no effect on HW.
+ */
+#define NMI_NOW		BIT(8)
+
  /* internal variables */
  struct iTCO_wdt_private {
  	struct watchdog_device wddev;
@@ -217,15 +223,24 @@ static int update_no_reboot_bit_mem(void *priv, bool set)
  static int update_no_reboot_bit_cnt(void *priv, bool set)
  {
  	struct iTCO_wdt_private *p = priv;
-	u16 val, newval;
-
-	val = inw(TCO1_CNT(p));
+	u16 val, newval, mask = (~NMI_NOW);
+
Unnecessary (). Either case, please just mask against ~NMI_NOW directly.
The mask variable is not necessary.

+	/* writing back 1b1 to NMI_NOW of TCO1_CNT register

Standard multi-line comments, please.

Thanks,
Guenter

+	 * causes NMI_NOW bit inversion what consequently does
+	 * not allow to perform the register's value comparison
+	 * properly.
+	 *
+	 * NMI_NOW bit masking for TCO1_CNT register values
+	 * helps to avoid possible NMI_NOW bit inversions on
+	 * following write operation.
+	 */
+	val = inw(TCO1_CNT(p)) & mask;
  	if (set)
  		val |= BIT(0);
  	else
  		val &= ~BIT(0);
  	outw(val, TCO1_CNT(p));
-	newval = inw(TCO1_CNT(p));
+	newval = inw(TCO1_CNT(p)) & mask;
/* make sure the update is successful */
  	return val != newval ? -EIO : 0;





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux