Re: [PATCH v7 1/1] drivers: watchdog: revise watchdog bootstatus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/26/24 07:45, Chia Hsing Yin wrote:
I can include reset condition in struct maybe like this

static const struct aspeed_wdt_config ast2600_config = {
.ext_pulse_width_mask = 0xfffff,
.irq_shift = 0,
.irq_mask = GENMASK(31, 10),
.compatible = "aspeed,ast2600-scu",
.reset_event = AST2600_SYSTEM_RESET_EVENT,
.watchdog_reset_flag = AST2600_WATCHDOG_RESET_FLAG,
.extern_reset_flag = EXTERN_RESET_FLAG,
.reset_flag_clear = AST2600_RESET_FLAG_CLEAR,
};

in probe( ) we  just call

scu_base = syscon_regmap_lookup_by_compatible(wdt->cfg->compatible);
if (IS_ERR(scu_base))
     return PTR_ERR(scu_base);

ret = regmap_read(scu_base, wdt->cfg->reset_event, &status);
if (ret)
     return ret;

if ((status & POWERON_RESET_FLAG) == 0 &&

If you do that, please use
	if (!(status & POWERON_RESET_FLAG) && ...

      status & wdt->cfg->watchdog_reset_flag)
     wdt->wdd.bootstatus = (status & wdt->cfg->extern_reset_flag) ?
     WDIOF_EXTERN1 : WDIOF_CARDRESET;

status = wdt->cfg->watchdog_reset_flag | POWERON_RESET_FLAG |
wdt->cfg->extern_reset_flag;

ret = regmap_write(scu_base, wdt->cfg->reset_event, status);

Does this meet your expectations?

On Fri, Apr 26, 2024 at 8:42 AM Andrew Jeffery
<andrew@xxxxxxxxxxxxxxxxxxxx> wrote:

On Thu, 2024-04-25 at 17:07 +0800, Peter Yin wrote:
Regarding the AST2600 specification, the WDTn Timeout Status Register
(WDT10) has bit 1 reserved. Bit 1 of the status register indicates
on ast2500 if the boot was from the second boot source.
It does not indicate that the most recent reset was triggered by
the watchdog. The code should just be changed to set WDIOF_CARDRESET
if bit 0 of the status register is set. However, this bit can be clear when
watchdog register 0x0c bit1(Reset System after timeout) is enabled.
Thereforce include SCU register to veriy WDIOF_EXTERN1 and WDIOF_CARDRESET
in ast2600 SCU74 or ast2400/ast2500 SCU3C.

Signed-off-by: Peter Yin <peteryin.openbmc@xxxxxxxxx>
---
  drivers/watchdog/aspeed_wdt.c | 109 ++++++++++++++++++++++++++++++++--
  1 file changed, 103 insertions(+), 6 deletions(-)

After this patch the probe() implementation is ~250loc with a whole
bunch of conditional behaviours based on the SoC version. Maybe it's
time to break it up into version-specific functions that are called
from the probe() implementation?

Andrew





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux