StarFive's JH8100 watchdog is based on JH7110, with JH8100 watchdog only
requiring one reset signal.
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@xxxxxxxxxxxxxxxx>
---
arch/riscv/boot/dts/starfive/jh8100.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh8100.dtsi b/arch/riscv/boot/dts/starfive/jh8100.dtsi
index 9863c61324a0..657d8b79e708 100644
--- a/arch/riscv/boot/dts/starfive/jh8100.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh8100.dtsi
@@ -360,6 +360,15 @@ uart4: serial@121a0000 {
status = "disabled";
};
+ watchdog@12270000 {
+ compatible = "starfive,jh8100-wdt", "starfive,jh7110-wdt";
+ reg = <0x0 0x12270000 0x0 0x10000>;
+ clocks = <&syscrg_ne SYSCRG_NE_CLK_WDT_APB>,
+ <&syscrg_ne SYSCRG_NE_CLK_WDT>;
+ clock-names = "apb", "core";
+ resets = <&syscrg_ne SYSCRG_NE_RSTN_WDT0>;
+ };
+
syscrg_ne: syscrg_ne@12320000 {
compatible = "starfive,jh8100-syscrg-ne";
reg = <0x0 0x12320000 0x0 0x10000>;
--
2.25.1
