Re: [PATCH 3/3] watchdog: sbsa_gwdt: add support for Marvell ac5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/15/23 10:01, Rob Herring wrote:
On Thu, Dec 14, 2023 at 05:04:14PM +0200, Elad Nachman wrote:
From: Elad Nachman <enachman@xxxxxxxxxxx>

Add support for Marvell ac5/x variant of the ARM
sbsa global watchdog. This watchdog deviates from
the standard driver by the following items:

1. Registers reside in secure register section.
    hence access is only possible via SMC calls to ATF.

2. There are couple more registers which reside in
    other register areas, which needs to be configured
    in order for the watchdog to properly generate
    reset through the SOC.

The new Marvell compatibility string differentiates between
the original sbsa mode of operation and the Marvell mode of
operation.

Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
---
  drivers/watchdog/sbsa_gwdt.c | 247 ++++++++++++++++++++++++++++++++---

That's more than half the existing driver...


... which makes me really unhappy and wonder if it is appropriate
to hack up the existing driver that much. it doesn't look like
Marvell ac5/x really implements SBSA. Given the large number of
device specific deviations, a separate driver may be more appropriate.

Guenter





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux