Re: (subset) [PATCH 0/3] Add watchdog nodes to msm8226 & msm8974

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sonntag, 3. Dezember 2023 05:54:39 CET Bjorn Andersson wrote:
> On Wed, 11 Oct 2023 18:33:12 +0200, Luca Weiss wrote:
> > Document the compatible for the watchdog found on both SoCs, and add
> > them to the SoC dtsi file. And especially for the case where the
> > bootloader has already enabled the watchdog we need to start petting it
> > on time, otherwise the system gets rebooted.
> > 
> > It's worth noting that the watchdog behaves a bit unexpectedly.
> > It appears the watchdog counts down significantly slower when there's no
> > load on the system and can last far longer than 30 seconds until they
> > bark. Only when putting load on the system, e.g. with stress-ng does the
> > watchdog interrupt fire and kill the system within an expected amount of
> > time.
> > 
> > [...]
> 
> Applied, thanks!
> 
> [3/3] ARM: dts: qcom: msm8974: Add watchdog node
>       commit: 95053f6bc8ffca438a261400d7c06bd74e3f106e

Hi Bjorn,

Any reason you didn't pick up the msm8226 patch? Doesn't seem to be just your
ty email, I only see the msm8974 patch in 
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/log/?h=arm32-for-6.8

Regards
Luca

> 
> Best regards,








[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux