Hi Sam,
On Tue, 21 Nov 2023 at 18:39, Sam Protsenko <semen.protsenko@xxxxxxxxxx> wrote:
>
> On Mon, Nov 20, 2023 at 3:21 PM Peter Griffin <peter.griffin@xxxxxxxxxx> wrote:
> >
> > Add initial board support for the Pixel 6 phone code named Oriole. This
> > has been tested with a minimal busybox initramfs and boots to a shell.
Will fix it in v5.
Peter
> >
> > Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/exynos/Makefile | 2 +
> > arch/arm64/boot/dts/exynos/google/Makefile | 4 +
> > .../boot/dts/exynos/google/gs101-oriole.dts | 79 +++++++++++++++++++
> > 3 files changed, 85 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/exynos/google/Makefile
> > create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> >
> > diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> > index 6e4ba69268e5..44c24a8ad9e1 100644
> > --- a/arch/arm64/boot/dts/exynos/Makefile
> > +++ b/arch/arm64/boot/dts/exynos/Makefile
> > @@ -1,4 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0
> > +subdir-y += google
> > +
> > dtb-$(CONFIG_ARCH_EXYNOS) += \
> > exynos5433-tm2.dtb \
> > exynos5433-tm2e.dtb \
> > diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile
> > new file mode 100644
> > index 000000000000..0a6d5e1fe4ee
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/exynos/google/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +dtb-$(CONFIG_ARCH_EXYNOS) += \
> > + gs101-oriole.dtb \
> > diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> > new file mode 100644
> > index 000000000000..111665490840
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> > @@ -0,0 +1,79 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Oriole Device Tree
> > + *
> > + * Copyright 2021-2023 Google,LLC
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
>
> Now that the dts is being built as a dtb (not dtbo), I don' think this
> /plugin/ bit is needed here?
>
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include "gs101-pinctrl.h"
> > +#include "gs101.dtsi"
> > +
> > +/ {
> > + model = "Oriole";
> > + compatible = "google,gs101-oriole", "google,gs101";
> > +
> > + chosen {
> > + bootargs = "earlycon=exynos4210,mmio32,0x10A00000 console=ttySAC0";
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
> > +
> > + button-vol-down {
> > + label = "KEY_VOLUMEDOWN";
> > + linux,code = <KEY_VOLUMEDOWN>;
> > + gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
> > + wakeup-source;
> > + };
> > +
> > + button-vol-up {
> > + label = "KEY_VOLUMEUP";
> > + linux,code = <KEY_VOLUMEUP>;
> > + gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
> > + wakeup-source;
> > + };
> > +
> > + button-power {
> > + label = "KEY_POWER";
> > + linux,code = <KEY_POWER>;
> > + gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
> > + wakeup-source;
> > + };
> > + };
> > +};
> > +
> > +&pinctrl_1 {
> > + key_voldown: key-voldown-pins {
> > + samsung,pins = "gpa7-3";
> > + samsung,pin-function = <0xf>;
> > + samsung,pin-pud = <0>;
> > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> > + };
> > +
> > + key_volup: key-volup-pins {
> > + samsung,pins = "gpa8-1";
> > + samsung,pin-function = <0xf>;
> > + samsung,pin-pud = <0>;
> > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> > + };
> > +};
> > +
> > +&pinctrl_0 {
> > + key_power: key-power-pins {
> > + samsung,pins = "gpa10-1";
> > + samsung,pin-function = <0xf>;
> > + samsung,pin-pud = <0>;
> > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> > + };
> > +};
> > +
> > +&watchdog_cl0 {
> > + timeout-sec = <30>;
> > +};
> > --
> > 2.43.0.rc1.413.gea7ed67945-goog
> >
