Re: [PATCH v3 16/20] tty: serial: samsung: Add gs101 compatible and SoC data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Arnd,

On Thu, 12 Oct 2023 at 07:07, Arnd Bergmann <arnd@xxxxxxxx> wrote:
>
> On Wed, Oct 11, 2023, at 20:48, Peter Griffin wrote:
> > Add serial driver data for Google Tensor gs101 SoC.
> >
> > Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
>
> Reviewed-by: Arnd Bergmann <arnd@xxxxxxxx>

Thanks!

>
> While the patch is now correct, I would point out a few
> improvements we could make on top:
>
> > +static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = {
> > +     EXYNOS_COMMON_SERIAL_DRV_DATA(),
> > +     /* rely on samsung,uart-fifosize DT property for fifosize */
> > +     .fifosize = { 0 },
> > +};
> > +
> >  #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
> >  #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
> >  #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
> > +#define GS101_SERIAL_DRV_DATA (&gs101_serial_drv_data)
>
> Since this is now actually correct for any Exynos variant that
> has the FIFO size listed in the DT, we could use a variable/macro
> name that leads itself to being used by future chips.

I've updated this to exynos_fifoszdt_serial_drv_data and
EXYNOS_FIFOSZDT_SERIAL_DRV_DATA in v4 and added a
comment that it is common struct for platforms that specify
uart,fifosize in DT.

I've also updated the YAML to make this a required property for
google,gs101-uart.

>
> There is also the question of whether we want to address the
> ordering bug for the other SoC types. The way I understand it,
> the .fifosize array logic is wrong because it relies on having
> a particular alias for each of the ports to match the entry in
> the array.
> For the exynosautov9, this would be trivially fixed
> by using the same data as gs101 (since it already lists the
> correct size in DT), but for the other ones we'd need a different
> logic.
>

It seems samsung,exynosautov9-uart is in the yaml bindings and
exynosautov9.dtsi but never actually made it into the driver. But
it could be added to the driver and made to use the common
exynos_fifoszdt_serial_drv_data mentioned above.

I think any new platform should specify this in DT as many of these
UARTs on newer Exynos are actually universal serial IPs which can
be UART, I2C or SPI which is board dependent. So having the fifosize
in the driver, based on a SoC compatible and relying on probe order
and DT aliases seems very prone to error.

regards,

Peter.

> > @@ -2688,6 +2696,9 @@ static const struct platform_device_id
> > s3c24xx_serial_driver_ids[] = {
> >       }, {
> >               .name           = "artpec8-uart",
> >               .driver_data    = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA,
> > +     }, {
> > +             .name           = "gs101-uart",
> > +             .driver_data    = (kernel_ulong_t)GS101_SERIAL_DRV_DATA,
> >       },
> >       { },
> >  };
>
> I just noticed that the platform_device_id array is currently
> only used for mach-crag6410, since everything else uses DT
> based probing. s3c64xx is scheduled for removal in early 2024
> (though no patch has been sent), and we can probably just
> remove all the atags/platform_device based code when that happens.
>
>       Arnd



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux