From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> commit 1ae3e78c08209ac657c59f6f7ea21bbbd7f6a1d4 upstream. The watchdog core can handle pinging of the watchdog before userspace opens the device. For this reason instead of stopping the timer, just mark it as running and let the watchdog core take care of it. Cc: Malin Jonsson <malin.jonsson@xxxxxxxxxxxx> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20210921102900.61586-1-mika.westerberg@xxxxxxxxxxxxxxx Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx> --- drivers/watchdog/iTCO_wdt.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index ced2fc0deb8c..96ff06d7d735 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -424,6 +424,16 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev) return time_left; } +static void iTCO_wdt_set_running(struct iTCO_wdt_private *p) +{ + u16 val; + + /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is * enabled */ + val = inw(TCO1_CNT(p)); + if (!(val & BIT(11))) + set_bit(WDOG_HW_RUNNING, &p->wddev.status); +} + /* * Kernel Interfaces */ @@ -566,8 +576,7 @@ static int iTCO_wdt_probe(struct platform_device *pdev) watchdog_set_drvdata(&p->wddev, p); platform_set_drvdata(pdev, p); - /* Make sure the watchdog is not running */ - iTCO_wdt_stop(&p->wddev); + iTCO_wdt_set_running(p); /* Check that the heartbeat value is within it's range; if not reset to the default */ -- 2.35.3
