On 3/4/23 13:46, Christophe JAILLET wrote:
Le 04/03/2023 à 17:56, Guenter Roeck a écrit :The devm_clk_get[_optional]_enabled() helpers: - call devm_clk_get[_optional]() - call clk_prepare_enable() and register what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the calls to clk_disable_unprepare(). While at it, use dev_err_probe consistently, and use its return value to return the error code. Cc: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/watchdog/s3c2410_wdt.c | 45 +++++++--------------------------- 1 file changed, 9 insertions(+), 36 deletions(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 200ba236a72e..a1fcb79b0b7c 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -661,35 +661,17 @@ static int s3c2410wdt_probe(struct platform_device *pdev) if (IS_ERR(wdt->reg_base)) return PTR_ERR(wdt->reg_base); - wdt->bus_clk = devm_clk_get(dev, "watchdog"); - if (IS_ERR(wdt->bus_clk)) { - dev_err(dev, "failed to find bus clock\n"); - return PTR_ERR(wdt->bus_clk); - } - - ret = clk_prepare_enable(wdt->bus_clk); - if (ret < 0) { - dev_err(dev, "failed to enable bus clock\n"); - return ret; - } + wdt->bus_clk = devm_clk_get_enabled(dev, "watchdog"); + if (IS_ERR(wdt->bus_clk)) + return dev_err_probe(dev, PTR_ERR(wdt->bus_clk), "failed to get bus clock\n"); /* * "watchdog_src" clock is optional; if it's not present -- just skip it * and use "watchdog" clock as both bus and source clock. */ - wdt->src_clk = devm_clk_get_optional(dev, "watchdog_src"); - if (IS_ERR(wdt->src_clk)) { - dev_err_probe(dev, PTR_ERR(wdt->src_clk), - "failed to get source clock\n"); - ret = PTR_ERR(wdt->src_clk); - goto err_bus_clk; - } - - ret = clk_prepare_enable(wdt->src_clk); - if (ret) { - dev_err(dev, "failed to enable source clock\n"); - goto err_bus_clk; - } + wdt->src_clk = devm_clk_get_optional_enabled(dev, "watchdog_src"); + if (IS_ERR(wdt->src_clk)) + return dev_err_probe(dev, PTR_ERR(wdt->src_clk), "failed to get source clock\n"); wdt->wdt_device.min_timeout = 1; wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt); @@ -710,7 +692,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) S3C2410_WATCHDOG_DEFAULT_TIME); } else { dev_err(dev, "failed to use default timeout\n"); - goto err_src_clk; + return ret;Hi, Nit: this also could be "return dev_err_probe()"} } @@ -718,7 +700,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) pdev->name, pdev); if (ret != 0) { dev_err(dev, "failed to install irq (%d)\n", ret); - goto err_src_clk; + return ret;Nit: this also could be "return dev_err_probe()"
The primary reason to call dev_err_probe() is that the error may be -EPROBE_DEFER, in which case the error message is suppressed. That is not the case for those two functions; they never return -EPROBE_DEFER. Calling dev_err_probe() would give the false impression that the functions _might_ return -EPROBE_DEFER. Thanks, Guenter
