Re: [PATCH v3 2/2] drivers: watchdog: Add StarFive Watchdog driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023/2/24 23:18, Guenter Roeck wrote:
> On 2/23/23 23:42, Xingyu Wu wrote:
>> On 2023/2/24 2:23, Guenter Roeck wrote:
>>> On Mon, Feb 20, 2023 at 04:19:26PM +0800, Xingyu Wu wrote:
>>>> [...]
>>>> +
>>>> +    wdt->wdt_device.min_timeout = 1;
>>>> +    wdt->wdt_device.max_timeout = starfive_wdt_max_timeout(wdt);
>>>
>>>     wdt->wdt_device.timeout = STARFIVE_WDT_DEFAULT_TIME;
>>>
>>> should be set here. Otherwise the warning below would always be seen
>>> if the module parameter is not set.
>>>
>>>> +
>>>> +    watchdog_set_drvdata(&wdt->wdt_device, wdt);
>>>> +
>>>> +    /*
>>>> +     * see if we can actually set the requested heartbeat,
>>>> +     * and if not, try the default value.
>>>> +     */
>>>> +    watchdog_init_timeout(&wdt->wdt_device, heartbeat, dev);
>>>> +    if (wdt->wdt_device.timeout == 0 ||
>>>
>>> If wdt->wdt_device.timeout is pre-initialized, it will never be 0 here.
>>>
>>>> +        wdt->wdt_device.timeout > wdt->wdt_device.max_timeout) {
>>>
>>> That won't happen because watchdog_init_timeout() validates it and does
>>> not update the value if it is out of range.
>>>
>>>> +        dev_warn(dev, "heartbeat value out of range, default %d used\n",
>>>> +             STARFIVE_WDT_DEFAULT_TIME);
>>>> +        wdt->wdt_device.timeout = STARFIVE_WDT_DEFAULT_TIME;
>>>
>>> And this is then unnecessary. wdt->wdt_device.timeout will always be
>>> valid if it was pre-initialized.
>>
>> It is changed to be this at beginning of the driver:
>>
>> static int heartbeat = STARFIVE_WDT_DEFAULT_TIME;
>>
> 
> No, this is wrong. The static variable should be set to 0 to indicate
> "use default".
> 
>> and it is changed to be this here:
>>
>> ret = watchdog_init_timeout(&wdt->wdt_device, heartbeat, dev);
>> if (ret)
>>     return ret;
>>
>> Would that be better?
>>
> 
> No, it is worse, because it would not instantiate the watchdog at all
> if a bad heartbeat is provided.
> 

So instantiate the watchdog with hearbeat first. And if this wrong, use default timeout.
:
if (watchdog_init_timeout(&wdt->wdt_device, heartbeat, dev))
	wdt->wdt_device.timeout = STARFIVE_WDT_DEFAULT_TIME;


Best regards,
Xingyu Wu




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux