Quoting Jonathan Neuschäfer (2022-11-04 09:18:49) > This driver implements the following features w.r.t. the clock and reset > controller in the WPCM450 SoC: > > - It calculates the rates for all clocks managed by the clock controller > - It leaves the clock tree mostly unchanged, except that it enables/ > disables clock gates based on usage. > - It exposes the reset lines managed by the controller using the > Generic Reset Controller subsystem > > NOTE: If the driver and the corresponding devicetree node are present, > the driver will disable "unused" clocks. This is problem until > the clock relations are properly declared in the devicetree (in a > later patch). Until then, the clk_ignore_unused kernel parameter > can be used as a workaround. > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> > --- Applied to clk-next
