On Wed, Nov 16, 2022 at 10:07:06AM +0800, Li Hua wrote: > The stack variable msb and lsb may be used uninitialized in function > usb_pcwd_get_temperature and usb_pcwd_get_timeleft when usb card no response. > > The build waring is: > drivers/watchdog/pcwd_usb.c:336:22: error: ‘lsb’ is used uninitialized in this function [-Werror=uninitialized] > *temperature = (lsb * 9 / 5) + 32; > ~~~~^~~ > drivers/watchdog/pcwd_usb.c:328:21: note: ‘lsb’ was declared here > unsigned char msb, lsb; > ^~~ > cc1: all warnings being treated as errors > scripts/Makefile.build:250: recipe for target 'drivers/watchdog/pcwd_usb.o' failed > make[3]: *** [drivers/watchdog/pcwd_usb.o] Error 1 > > Fixes: b7e04f8c61a4 ("mv watchdog tree under drivers") > Signed-off-by: Li Hua <hucool.lihua@xxxxxxxxxx> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> > --- > v1 -> v2: just initialize lsb and msb with 0, but returning -EFAULT > --- > drivers/watchdog/pcwd_usb.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c > index 1bdaf17c1d38..8202f0a6b093 100644 > --- a/drivers/watchdog/pcwd_usb.c > +++ b/drivers/watchdog/pcwd_usb.c > @@ -325,7 +325,8 @@ static int usb_pcwd_set_heartbeat(struct usb_pcwd_private *usb_pcwd, int t) > static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd, > int *temperature) > { > - unsigned char msb, lsb; > + unsigned char msb = 0x00; > + unsigned char lsb = 0x00; > > usb_pcwd_send_command(usb_pcwd, CMD_READ_TEMP, &msb, &lsb); > > @@ -341,7 +342,8 @@ static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd, > static int usb_pcwd_get_timeleft(struct usb_pcwd_private *usb_pcwd, > int *time_left) > { > - unsigned char msb, lsb; > + unsigned char msb = 0x00; > + unsigned char lsb = 0x00; > > /* Read the time that's left before rebooting */ > /* Note: if the board is not yet armed then we will read 0xFFFF */ > -- > 2.17.1 >