From: Ye Li <ye.li@xxxxxxx> According to measure on i.MX7ULP and i.MX8ULP, the RCS done needs about 3400us and 6700us respectively. So current 20us timeout is not enough. When reconfiguring is on-going, unlock and configure CS will lead to unknown result. Increase the wait timeout value to 10ms and check the return value of RCS wait to fix the issue Signed-off-by: Ye Li <ye.li@xxxxxxx> Signed-off-by: Alice Guo <alice.guo@xxxxxxx> Reviewed-by: Jacky Bai <ping.bai@xxxxxxx> Acked-by: Jason Liu <jason.hui.liu@xxxxxxx> --- drivers/watchdog/imx7ulp_wdt.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c index a0f6b8cea78f..12715c248688 100644 --- a/drivers/watchdog/imx7ulp_wdt.c +++ b/drivers/watchdog/imx7ulp_wdt.c @@ -39,7 +39,7 @@ #define DEFAULT_TIMEOUT 60 #define MAX_TIMEOUT 128 #define WDOG_CLOCK_RATE 1000 -#define WDOG_WAIT_TIMEOUT 20 +#define WDOG_WAIT_TIMEOUT 10000 static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool, 0000); @@ -80,7 +80,7 @@ static int imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable) writel(val | WDOG_CS_EN, wdt->base + WDOG_CS); else writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS); - imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); enable_out: local_irq_enable(); @@ -127,7 +127,9 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog, if (ret) goto timeout_out; writel(val, wdt->base + WDOG_TOVAL); - imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS); + if (ret) + goto timeout_out; wdog->timeout = timeout; -- 2.17.1
