Improve meson_gxbb_wdt watchdog driver 1) added module param timeout and nowayout same as other modules 2) print watchdog driver start status 3) add watchdog_stop_on_unregister 4) remove watchdog_stop_on_reboot ( still can be activated by watchdog.stop_on_reboot=1 ) i think this driver configuration more useful becouse we can get reboot waranty for abnormal situations on shutdown stage Signed-off-by: Artem Lapkin <art@xxxxxxxxxx> --- drivers/watchdog/meson_gxbb_wdt.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c index 5a9ca10fbcfa..15c889932c13 100644 --- a/drivers/watchdog/meson_gxbb_wdt.c +++ b/drivers/watchdog/meson_gxbb_wdt.c @@ -35,6 +35,17 @@ struct meson_gxbb_wdt { struct clk *clk; }; +static bool nowayout = WATCHDOG_NOWAYOUT; +static unsigned int timeout = DEFAULT_TIMEOUT; + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, "Watchdog heartbeat in seconds=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); + static int meson_gxbb_wdt_start(struct watchdog_device *wdt_dev) { struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev); @@ -174,7 +185,7 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev) data->wdt_dev.ops = &meson_gxbb_wdt_ops; data->wdt_dev.max_hw_heartbeat_ms = GXBB_WDT_TCNT_SETUP_MASK; data->wdt_dev.min_timeout = 1; - data->wdt_dev.timeout = DEFAULT_TIMEOUT; + data->wdt_dev.timeout = timeout; watchdog_set_drvdata(&data->wdt_dev, data); /* Setup with 1ms timebase */ @@ -186,7 +197,12 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev) meson_gxbb_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout); - watchdog_stop_on_reboot(&data->wdt_dev); + watchdog_set_nowayout(&data->wdt_dev, nowayout); + watchdog_stop_on_unregister(&data->wdt_dev); + + dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)", + data->wdt_dev.timeout, nowayout); + return devm_watchdog_register_device(dev, &data->wdt_dev); } -- 2.25.1