[PATCH 1/2] dt-bindings: watchdog: gpio-wdt: add "start-at-boot"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Documentation for new device tree property "start-at-boot".

Signed-off-by: Francesco Zanella <francesco.zanella@xxxxxxxxx>
---
 Documentation/devicetree/bindings/watchdog/gpio-wdt.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
index 198794963786..cdaf7f0602e8 100644
--- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
@@ -17,6 +17,13 @@ Optional Properties:
 - always-running: If the watchdog timer cannot be disabled, add this flag to
   have the driver keep toggling the signal without a client. It will only cease
   to toggle the signal when the device is open and the timeout elapsed.
+- start-at-boot: Start pinging hw watchdog at probe, in order to take advantage
+  of kernel configs:
+  - WATCHDOG_HANDLE_BOOT_ENABLED: Avoid possible reboot if hw watchdog was been
+    enabled before the kernel (by uboot for example) and userspace doesn't take
+    control of /dev/watchdog in time;
+  - WATCHDOG_OPEN_TIMEOUT: Reboot if userspace doesn't take control of
+    /dev/watchdog within the timeout.
 
 Example:
 	watchdog: watchdog {
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux