Re: watchdog: iTCO_wdt: failed to load

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Guenter,

On Wed, Jul 24, 2019 at 6:57 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> What is the output of /proc/iomem, what PCI devices does it have, and what are
> the ACPI devices ? Reason for asking is that I don't immediately see the ACPI
> or PCI devices associated with above patch in your dmesg. If not, the patch
> might actually cause the watchdog in your system not to work.

/proc/iomem  - http://paste.debian.net/1092996/
PCI devices  - http://paste.debian.net/1092997/
ACPI devices - http://paste.debian.net/1093003/

> Also, did this ever work in your system ? If it did work, did the failure
> start after a kernel update or after a BIOS update ?

The hardware watchdog has never worked in the system. Without the
patch https://lore.kernel.org/patchwork/patch/770990/ the probe error
is seen,
[    3.828440] iTCO_wdt iTCO_wdt: can't request region for resource
[mem 0x00c5fffc-0x00c5ffff]
[    3.828803] iTCO_wdt: probe of iTCO_wdt failed with error -16

With the patch the module loads fine, but the hardware watchdog does not work.

Regards,
Vignesh



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux