From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> WDD value must be always set to max (0xFFF) otherwise the hardware block will reset the board on the first ping of the watchdog. Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> --- drivers/watchdog/sama5d4_wdt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c index b8da1bf..5afe10c 100644 --- a/drivers/watchdog/sama5d4_wdt.c +++ b/drivers/watchdog/sama5d4_wdt.c @@ -110,9 +110,7 @@ static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd, u32 value = WDT_SEC2TICKS(timeout); wdt->mr &= ~AT91_WDT_WDV; - wdt->mr &= ~AT91_WDT_WDD; wdt->mr |= AT91_WDT_SET_WDV(value); - wdt->mr |= AT91_WDT_SET_WDD(value); /* * WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When @@ -248,7 +246,7 @@ static int sama5d4_wdt_probe(struct platform_device *pdev) timeout = WDT_SEC2TICKS(wdd->timeout); - wdt->mr |= AT91_WDT_SET_WDD(timeout); + wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT)); wdt->mr |= AT91_WDT_SET_WDV(timeout); ret = sama5d4_wdt_init(wdt); -- 2.7.4
