Fix error bit operation in watchdog_start()
Fixes: 14b24a88a3660 ("watchdog: f71808e_wdt: Add F81866 support")
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@xxxxxxxxx>
---
drivers/watchdog/f71808e_wdt.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index bd2ced9f39f4..afd1446241b3 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -339,6 +339,7 @@ static int f71862fg_pin_configure(unsigned short ioaddr)
static int watchdog_start(void)
{
int err;
+ u8 tmp;
/* Make sure we don't die as soon as the watchdog is enabled below */
err = watchdog_keepalive();
@@ -388,19 +389,18 @@ static int watchdog_start(void)
break;
case f81866:
- /* Set pin 70 to WDTRST# */
- superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
- BIT(3) | BIT(0));
- superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
- BIT(2));
/*
* GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
* The PIN 70(GPIO15/WDTRST) is controlled by 2Ch:
* BIT5: 0 -> WDTRST#
* 1 -> GPIO15
*/
- superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1,
- BIT(5));
+ tmp = superio_inb(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL);
+ tmp &= ~(BIT(3) | BIT(0));
+ tmp |= BIT(2);
+ superio_outb(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, tmp);
+
+ superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1, 5);
break;
default:
--
2.7.4
