Reference the system device tree when configuring the watchdog.
Configure for external signal generation if optional attribute
'external-signal' is present in device tree. Configure for
reset system after timeout if the optional attribute
'no-system-reset' is not present. Disabling system reset may be
required in situations where one of the other watchdogs in the
systems is responsible for this.
Signed-off-by: Christopher Bostic <cbostic@xxxxxxxxxxxxxxxxxx>
---
drivers/watchdog/aspeed_wdt.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index 1c65258..9deb4be 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -140,6 +140,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
{
struct aspeed_wdt *wdt;
struct resource *res;
+ struct device_node *np;
int ret;
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
@@ -170,8 +171,16 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
* the SOC and not the full chip
*/
wdt->ctrl = WDT_CTRL_RESET_MODE_SOC |
- WDT_CTRL_1MHZ_CLK |
- WDT_CTRL_RESET_SYSTEM;
+ WDT_CTRL_1MHZ_CLK;
+
+ np = pdev->dev.of_node;
+ if (np && !of_get_property(np, "no-system-reset", NULL))
+ wdt->ctrl |= WDT_CTRL_RESET_SYSTEM;
+
+ if (np && of_get_property(np, "external-signal", NULL))
+ wdt->ctrl |= WDT_CTRL_WDT_EXT;
+
+ writel(wdt->ctrl, wdt->base + WDT_CTRL);
if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) {
aspeed_wdt_start(&wdt->wdd);
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
