Hi,
On 12/15/2016 02:05 AM, Hui Chun Ong wrote:
Add support for the watchdog timer on PXI Embedded Controller.
Signed-off-by: Hui Chun Ong <hui.chun.ong@xxxxxx>
---
v3: Update timeout calculation from miliseconds to seconds.
Reorder watchdog_regiser_device() call to prevent potential race condition.
v2: Remove mutex lock and platform_device *pdev fields from struct nic7018_wdt.
Update config NIC7018_WDT description.
Update nic7018_get_config() to never return error.
Remove checking for IO resource size in nic7018_probe().
v1: Remove non-standard attributes.
Change from acpi_driver to platform_driver.
Rename driver from ni7018_wdt to nic7018_wdt.
---
Documentation/watchdog/watchdog-parameters.txt | 5 +
drivers/watchdog/Kconfig | 10 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/nic7018_wdt.c | 265 +++++++++++++++++++++++++
4 files changed, 281 insertions(+)
create mode 100644 drivers/watchdog/nic7018_wdt.c
[ ... ]
+
+static int nic7018_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct watchdog_device *wdd;
+ struct nic7018_wdt *wdt;
+ struct resource *io_rc;
+ int ret;
+
+ wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, wdt);
+
+ io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!io_rc) {
+ dev_err(dev, "missing IO resources\n");
+ return -EINVAL;
+ }
+
+ if (!devm_request_region(dev, io_rc->start, resource_size(io_rc),
+ KBUILD_MODNAME)) {
+ dev_err(dev, "failed to get IO region\n");
+ return -EBUSY;
+ }
+
+ wdt->io_base = io_rc->start;
+ wdd = &wdt->wdd;
+ wdd->info = &nic7018_wdd_info;
+ wdd->ops = &nic7018_wdd_ops;
+ wdd->min_timeout = WDT_MIN_TIMEOUT;
+ wdd->max_timeout = WDT_MAX_TIMEOUT;
+ wdd->timeout = WDT_DEFAULT_TIMEOUT;
+ wdd->parent = dev;
+
+ watchdog_set_drvdata(wdd, wdt);
+ watchdog_set_nowayout(wdd, nowayout);
+
+ ret = watchdog_init_timeout(wdd, timeout, dev);
+ if (ret)
+ dev_warn(dev, "unable to set timeout value, using default\n");
+
+ /* Unlock WDT register */
+ outb(UNLOCK, wdt->io_base + WDT_REG_LOCK);
+
+ ret = watchdog_register_device(wdd);
+ if (ret) {
+ dev_err(dev, "failed to register watchdog\n");
I don't want to be annoying, but for consistency you'll need to lock the device here.
+ return ret;
+ }
+
+ dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n",
+ wdt->io_base, timeout, nowayout);
+ return 0;
+}
+
+static int nic7018_remove(struct platform_device *pdev)
+{
+ struct nic7018_wdt *wdt = platform_get_drvdata(pdev);
+
+ nic7018_stop(&wdt->wdd);
This always bothers me. I _think_ the core will prevent a driver from unloading
while the watchdog is running open (and thus might be running), which would make
this unnecessary. But I am never really sure and will have to look it up.
Guenter
+ watchdog_unregister_device(&wdt->wdd);
+
+ /* Lock WDT register */
+ outb(LOCK, wdt->io_base + WDT_REG_LOCK);
+
+ return 0;
+}
+
+static const struct acpi_device_id nic7018_device_ids[] = {
+ {"NIC7018", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, nic7018_device_ids);
+
+static struct platform_driver watchdog_driver = {
+ .probe = nic7018_probe,
+ .remove = nic7018_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .acpi_match_table = ACPI_PTR(nic7018_device_ids),
+ },
+};
+
+module_platform_driver(watchdog_driver);
+
+MODULE_DESCRIPTION("National Instruments NIC7018 Watchdog driver");
+MODULE_AUTHOR("Hui Chun Ong <hui.chun.ong@xxxxxx>");
+MODULE_LICENSE("GPL");
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
