On 2016-10-07 17:18, Pantelis Antoniou wrote: > From: Georgi Vlaev <gvlaev@xxxxxxxxxxx> > > Add device tree bindings document for the SAM MDIO block > present in Juniper's SAM FPGA. > > Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx> > [Ported from Juniper kernel] > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/net/mdio-sam.txt | 48 ++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/mdio-sam.txt > > diff --git a/Documentation/devicetree/bindings/net/mdio-sam.txt b/Documentation/devicetree/bindings/net/mdio-sam.txt > new file mode 100644 > index 0000000..7d354e0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/mdio-sam.txt > @@ -0,0 +1,48 @@ > +Juniper SAM FPGA MFD MDIO bus properties. > + > +Required properties: > +- compatible : "jnx,mdio-sam" > +- reg : The start offset of the MDIO bus range > +- #address-cells = <1>; > +- #size-cells = <0>; > + > +Optional properties: > + > +Required properties for child nodes: > +- #address-cells = <1>; > +- #size-cells = <0>; > +- reg : The MDIO bus offset within the MDIO range. > + > + > +Example : > + > + sam@10 { > + compatible = "jnx,sam"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + mdio-sam@10 { This should be mdio-sam@40000, OR ... > + compatible = "jnx,mdio-sam"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x40000>; ... this should be reg = <0x10>. AFAIK. Cheers, Peter > + > + mdio0: mdio-sam@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + }; > + > + mdio1: mdio-sam@4000 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4000>; > + }; > + > + mdio2: mdio-sam@8000 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x8000>; > + }; > + }; > + }; > -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html