Re: [PATCH v2 2/2] watchdog: imx2_wdt: add set_pretimeout interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/03/2015 12:04 AM, Robin Gong wrote:
On Mon, Nov 02, 2015 at 11:48:29PM -0800, Guenter Roeck wrote:
On 11/02/2015 10:11 PM, Robin Gong wrote:
Enable set_pretimeout interface and trigger the pretimeout interrupt before
watchdog timeout event happen.

Signed-off-by: Robin Gong <b38343@xxxxxxxxxxxxx>
---
  drivers/watchdog/imx2_wdt.c | 58 ++++++++++++++++++++++++++++++++++++++++++++-
  1 file changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 0bb1a1d..bd42857 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -24,6 +24,7 @@
  #include <linux/clk.h>
  #include <linux/delay.h>
  #include <linux/init.h>
+#include <linux/interrupt.h>
  #include <linux/io.h>
  #include <linux/jiffies.h>
  #include <linux/kernel.h>
@@ -52,12 +53,18 @@
  #define IMX2_WDT_WRSR		0x04		/* Reset Status Register */
  #define IMX2_WDT_WRSR_TOUT	(1 << 1)	/* -> Reset due to Timeout */

+#define IMX2_WDT_WICR		0x06		/*Interrupt Control Register*/
+#define IMX2_WDT_WICR_WIE	(1 << 15)	/* -> Interrupt Enable */
+#define IMX2_WDT_WICR_WTIS	(1 << 14)	/* -> Interrupt Status */
+#define IMX2_WDT_WICR_WICT	(0xFF)	/* Watchdog Interrupt Timeout */

Unnecessary ( )

+
  #define IMX2_WDT_WMCR		0x08		/* Misc Register */

  #define IMX2_WDT_MAX_TIME	128
  #define IMX2_WDT_DEFAULT_TIME	60		/* in seconds */

  #define WDOG_SEC_TO_COUNT(s)	((s * 2 - 1) << 8)
+#define WDOG_SEC_TO_PRECOUNT(s)	((s) * 2)	/* set WDOG pre timeout count*/

  struct imx2_wdt_device {
  	struct clk *clk;
@@ -80,7 +87,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="

  static const struct watchdog_info imx2_wdt_info = {
  	.identity = "imx2+ watchdog",
-	.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+	.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE
+		   | WDIOF_PRETIMEOUT,
  };

  static int imx2_restart_handler(struct notifier_block *this, unsigned long mode,
@@ -207,12 +215,49 @@ static inline void imx2_wdt_ping_if_active(struct watchdog_device *wdog)
  	}
  }

+static int imx2_wdt_set_pretimeout(struct watchdog_device *wdog,
+				   unsigned int new_timeout)
+{
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+	u32 val;
+
+	regmap_read(wdev->regmap, IMX2_WDT_WICR, &val);
+	/* set the new pre-timeout value in the WSR */
+	val &= ~IMX2_WDT_WICR_WICT;
+	val |= WDOG_SEC_TO_PRECOUNT(new_timeout);

Looking into this, I think we need more information in the first patch.
Specifically, we need a value for max_pretimeout and validate it
(new_timeout must be smaller than 128 to avoid overflows, independent
of the maximum timeout).

I think it's enough, since there is "t >= wdd->timeout" in
watchdog_pretimeout_invalid() of the first patch and wdd->timeout is never
bigger than wdd->max_timeout which setting in imx2_wdt.c as 128.

We are dealing with infrastructure code here. This happens to work for your driver,
but that doesn't mean it will work for other drivers.

Anyway, I recalled that there is another patchset pending to add pretimeout
support into the watchdog code. I'll have to dig that out and consolidate the two.

Guenter

+
+	regmap_write(wdev->regmap, IMX2_WDT_WICR, val | IMX2_WDT_WICR_WIE);
+
+	wdog->pretimeout = new_timeout;
+
+	return 0;
+}
+
+static irqreturn_t imx2_wdt_isr(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct watchdog_device *wdog = platform_get_drvdata(pdev);
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+	u32 val;
+
+	regmap_read(wdev->regmap, IMX2_WDT_WICR, &val);
+	if (val & IMX2_WDT_WICR_WTIS) {
+		/*clear interrupt status bit*/
+		regmap_write(wdev->regmap, IMX2_WDT_WICR, val);
+		panic("pre-timeout:%d, %d Seconds remained\n", wdog->pretimeout,

"seconds" - no capital 'S'.

+		      wdog->timeout - wdog->pretimeout);
+	}
+
+	return IRQ_HANDLED;
+}
+
  static const struct watchdog_ops imx2_wdt_ops = {
  	.owner = THIS_MODULE,
  	.start = imx2_wdt_start,
  	.stop = imx2_wdt_stop,
  	.ping = imx2_wdt_ping,
  	.set_timeout = imx2_wdt_set_timeout,
+	.set_pretimeout = imx2_wdt_set_pretimeout,
  };

  static const struct regmap_config imx2_wdt_regmap_config = {
@@ -229,6 +274,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
  	struct resource *res;
  	void __iomem *base;
  	int ret;
+	int irq;
  	u32 val;

  	wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL);
@@ -294,6 +340,16 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
  		goto disable_clk;
  	}

+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		ret = devm_request_irq(&pdev->dev, irq, imx2_wdt_isr, 0,
+				       dev_name(&pdev->dev), pdev);
+		if (ret) {
+			dev_err(&pdev->dev, "can't get irq %d\n", irq);
+			goto disable_clk;
+		}
+	}
+
  	wdev->restart_handler.notifier_call = imx2_restart_handler;
  	wdev->restart_handler.priority = 128;
  	ret = register_restart_handler(&wdev->restart_handler);


--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux