This patchset does the following things - Adds pmusysreg device node to exynos5.dtsi file - Adds watchdog DT nodes to Exynos5250 and 5420 - Uses syscon regmap interface to configure pmu registers to mask/unmask enable/disable of watchdog. This patch set is rebased on Kgene's for-next branch and tested on SMDK5420 changes since V10: - followed coding style rules - removed duplicate error message suggested by Guenter Roeck <linux@xxxxxxxxxxxx> changes since V9: - added descriptions to s3c2410_wdt_variant structure fields - moved calling s3c2410wdt_mask_and_disable_reset() function above s3c2410wdt_start() call in probe - put dev_err message back to s3c2410wdt_mask_and_disable_reset() function (suggested by Doug Anderson <dianders@xxxxxxxxxxxx>) changes since V8: - modified the patch description for the below patch "watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register" - removed MODULE_ALIAS in watchdog driver - changed dev_warn to dev_err in one failure case handling (suggested by Guenter Roeck <linux@xxxxxxxxxxxx>) - renamed variable name from pmu_config to drv_data - changed the compatible field description in documentation file (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>) changes since V7: - re-ordered the patches in the series - moved pmu_config_s3c2410 structure out of ifdef CONFIG_OF and limited only this structure to platform match table - renamed structure name from s3c_wdt_driver_ids to s3c2410_wdt_ids - removed exynos variants from platform match table (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>) changes since V6: - added SoC-specific compatible value to syscon node and documented it - given more patch description for below patch ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420 - added platform_device_id array for watchdog devices - selected MFD_SYSCON in Kconfig entry for watchdog Changes since V5: - removed status property in DT nodes - changed the return type for the function s3c2410wdt_mask_and_disable_reset() and handled error cases - Handled to get driver data in non-DT cases - Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx> Changes since V4: - changed the node name from pmusysreg to syscon and node label from pmu_sys_reg to pmu_syscon - changed the property name from samsung,pmusysreg to samsung,syscon-phandle - used regmap_update_bits instead of remap_read/regmap_write - Addressed other comments given by Tomasz Figa <t.figa@xxxxxxxxxxx> Changes since V3: - changed the compatible strings for watchdog node - splitted up adding pmusysreg node and made it separate patch - Addressed comments given by Sachin Kamat <sachin.kamat@xxxxxxxxxx> Changes since V2: - used syscon regmap interface to configure pmu registers in WDT driver (suggested by Tomasz Figa <t.figa@xxxxxxxxxxx>) Changes since V1: - Added new compatible string for Exynos5 SoCs - Introduced quirk mechanism to program PMU registers - Addressed comments given by Tomasz Figa <t.figa@xxxxxxxxxxx> Leela Krishna Amudala (3): ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420 .../devicetree/bindings/arm/samsung/pmu.txt | 16 ++ .../devicetree/bindings/watchdog/samsung-wdt.txt | 21 ++- arch/arm/boot/dts/exynos5.dtsi | 7 - arch/arm/boot/dts/exynos5250.dtsi | 11 +- arch/arm/boot/dts/exynos5420.dtsi | 14 ++ drivers/watchdog/Kconfig | 1 + drivers/watchdog/s3c2410_wdt.c | 159 ++++++++++++++++++-- 7 files changed, 211 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html