On Tue, Sep 25, 2012 at 10:10 AM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@xxxxxxxxxxxx> wrote:
> On 09:28 Tue 25 Sep , Fabio Porcedda wrote:
>> Tested on an at91sam9260 board (evk-pro3)
>>
>> Signed-off-by: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
>> ---
>> .../devicetree/bindings/watchdog/atmel-wdt.txt | 19 +++++++++++++++++++
>> drivers/watchdog/at91sam9_wdt.c | 21 +++++++++++++++++++++
>> 2 files changed, 40 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
>>
>> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
>> new file mode 100644
>> index 0000000..724fad1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
>> @@ -0,0 +1,19 @@
>> +* Atmel Watchdog Timers
>> +
>> +** at91sam9-wdt
>> +
>> +Required properties:
>> +- compatible: must be "atmel,at91sam9-wdt".
>> +- reg: physical base address of the controller and length of memory mapped
>> + region.
>> +
>> +Optional properties:
>> +- heartbeat: contains the watchdog heartbeats in seconds.
>> +
>> +Example:
>> +
>> + watchdog@fffffd40 {
>> + compatible = "atmel,at91sam9-wdt";
> for the secind time atmel,at91sam9260-watchdog
Ok, i will fix this.
> you need to put the first soc that use it in the compatible
>> + reg = <0xfffffd40 0x10>;
>> + heartbeat = <10>;
> need put second in the property name so need to read the doc
I didn't found any example about a property with "second" in the name.
Which It's best "heartbeat-seconds", "heartbeat-sec" or "heartbeat-s" ?
> Best Regards,
> J.
Thanks for the review and my best regards
--
Fabio Porcedda
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
