On 05/31/2012 12:51 AM, Xiao Jiang wrote:
> Hi Jon and Benoit,
>>> Thanks for reminding, how about below patch?
>>>
>>> diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
>>> b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
>>> new file mode 100644
>>> index 0000000..4272d06
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
>>> @@ -0,0 +1,15 @@
>>> +TI Watchdog Timer (WDT) Controller for OMAP
>>> +
>>> +Required properties:
>>> +- compatible:
>>> + - "ti,omap2-wdt" for OMAP2
>>> + - "ti,omap3-wdt" for OMAP3
>>> + - "ti,omap4-wdt" for OMAP4
>>> +- ti,hwmods: Name of the hwmod associated to the WDT
>>> +
>>> +Examples:
>>> +
>>> +wdt2: wdt@73f98000 {
>>> + compatible = "ti,omap4-wdt";
>>> + ti,hwmods = "wd_timer2";
>>> +};
>>>
>>
>> Yes looks good. Thanks! Minor nit-pick in the example I would just copy
>> the omap4 node completely with the actual omap4 address :-)
>>
>>
> Oops, wrong addr, :). Perhaps we can drop address as you said, since the
> right addresses are defined
> in wd_timer2 hwmod (see [1]), and wdt also works without the address as
> follows.
>
> diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
> index f2ab4ea..0017bd8 100644
> --- a/arch/arm/boot/dts/omap2.dtsi
> +++ b/arch/arm/boot/dts/omap2.dtsi
> @@ -63,5 +63,10 @@
> ti,hwmods = "uart3";
> clock-frequency = <48000000>;
> };
> +
> + wdt2: wdt {
> + compatible = "ti,omap2-wdt";
> + ti,hwmods = "wd_timer2";
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 99474fa..dbf8a5b 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -215,5 +215,10 @@
> compatible = "ti,omap3-hsmmc";
> ti,hwmods = "mmc3";
> };
> +
> + wdt2: wdt {
> + compatible = "ti,omap3-wdt", "ti,omap2-wdt";
> + ti,hwmods = "wd_timer2";
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 359c497..ce74e87 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -272,5 +272,10 @@
> ti,hwmods = "mmc5";
> ti,needs-special-reset;
> };
> +
> + wdt2: wdt {
> + compatible = "ti,omap4-wdt", "ti,omap2-wdt";
> + ti,hwmods = "wd_timer2";
> + };
> };
> };
>
> Infos for omap3:
> # dmesg|grep Machine
> <6>[ 0.000000] Machine: Generic OMAP3 (Flattened Device Tree), model:
> TI OMAP3 EVM (OMAP3530, AM/DM37x)
> # dmesg|grep omap_wdt_probe
> <4>[ 2.552825] in omap_wdt_probe: 299, res->start = 0x48314000
>
> Infos for omap4:
> root@localhost:/root> dmesg|grep Machine
> [ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI
> OMAP4 SDP board
> root@localhost:/root> dmesg|grep omap_wdt_probe
> [ 1.687896] in omap_wdt_probe: 299, res->start = 0x4a314000
>
> So can I drop the wdt addr from dts file? otherwise it is not feasible
> to add omap2 wdt node in omap2.dtsi
> due to different addrs for omap2420 and omap2430.
Benoit, what is your preference here?
Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
