On Tue, Mar 27, 2012 at 8:58 PM, Wim Van Sebroeck <wim@xxxxxxxxx> wrote: > All, > > These are the patches that I will sent over for inclusion in Linus his tree tomorrow evening. I was looking for the 'Add multiple device support' patch series (http://www.spinics.net/lists/linux-watchdog/msg01071.html) to be included as our driver under drivers/staging/mei required them to work properly. We expose additional interface Thanks Tomas > > Kind regards, > Wim. > > commit b92c803ec61de59e6e4ab9b2748d8e633cec3f08 > Author: Wim Van Sebroeck <wim@xxxxxxxxx> > Date: Fri Mar 23 11:48:22 2012 +0100 > > watchdog: txx9wdt: fix timeout > > timeout should be an unsigned int. > Set the timeout value properly in the watchdog_device struct so that > we don't get an faulty values for the WDIOC_GETTIMEOUT ioctl call. > Add check to see that timeout is a valid parameter after it is loaded > as a module. > > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > Acked-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > > commit d6245842384c9289d4f778555fd8be729e0b0306 > Author: Axel Lin <axel.lin@xxxxxxxxx> > Date: Fri Mar 16 11:53:53 2012 +0800 > > watchdog: Convert txx9wdt driver to watchdog framework > > This patch converts txx9wdt driver to watchdog framework. > Also use devm_* APIs to save a few error handling code. > > Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx> > Acked-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit dddbc6a0513b25c80e73e14ee704186deedc0d00 > Author: Wim Van Sebroeck <wim@xxxxxxxxx> > Date: Thu Mar 22 20:42:16 2012 +0100 > > watchdog: coh901327_wdt.c: fix timeout > > Set the timeout value properly so that we don't get faulty values > for the WDIOC_GETTIMEOUT iotcl. 'margin' should be an unsigned int. > Also add a check to see if margin is a valid parameter after it is > loaded as a module. > > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > Acked-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > > commit 15b25701b282bd761a82c6508529b2145744075f > Author: Linus Walleij <linus.walleij@xxxxxxxxxx> > Date: Fri Mar 16 09:14:12 2012 +0100 > > watchdog: coh901327: convert to use watchdog core > > This converts the COH901327 watchdog to use the watchdog core. > I followed Wolframs document, looked at some other drivers and > tested it on the U300. > > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > Cc: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit fd7b673c92731fc6c0b1e999adfd87b6762ee797 > Author: Viresh Kumar <viresh.kumar@xxxxxx> > Date: Fri Mar 16 09:14:00 2012 +0100 > > watchdog: Add support for WDIOC_GETTIMELEFT IOCTL in watchdog core > > This patch adds support for WDIOC_GETTIMELEFT IOCTL in watchdog core. So, there > is another function pointer added to struct watchdog_ops, which can be passed by > drivers to support this IOCTL. > > Related documentation is updated too. > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 2ca1606359695cc7ce371c7829c4082d9095fc06 > Author: Wim Van Sebroeck <wim@xxxxxxxxx> > Date: Thu Mar 22 09:37:10 2012 +0100 > > watchdog: ep93xx_wdt: timeout is an unsigned int value. > > the timeout is a positive thus unsigned int value. > Also re-add the comment about the actual heartbeat. > > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 59dcf1eb1a4b15610c68a4dbb7430d61a65f4af3 > Author: Mika Westerberg <mika.westerberg@xxxxxx> > Date: Sun Mar 18 13:09:52 2012 +0200 > > watchdog: ep93xx_wdt: Fix timeout after conversion to watchdog core > > After the conversion of this driver to the watchdog core, I noticed that we > miss setting the initial timeout of the wdt device. > This results in a failure of the WDIOC_GETTIMEOUT ioctl call. > > Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxx> > Tested-by: Mika Westerberg <mika.westerberg@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit e12a679ddee4eb5ab2f99f7cf129355461e142c0 > Author: H Hartley Sweeten <hartleys@xxxxxxxxxxxxxxxxxxx> > Date: Wed Mar 14 10:31:50 2012 -0700 > > watchdog: Convert ep93xx driver to watchdog core > > Convert the ep93xx_wdt driver to the watchdog framework API. > > Also, use the dev_<fmt> functions instead of pr_<fmt> for logging. > > Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> > Cc: Ryan Mallon <rmallon@xxxxxxxxx> > Cc: Mika Westerberg <mika.westerberg@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit fb35a5ad5b4b2c3806b52b0159f4d5a0ad205c0f > Author: Viresh Kumar <viresh.kumar@xxxxxx> > Date: Mon Mar 12 09:52:15 2012 +0530 > > watchdog: sp805: Use devm routines > > sp805 driver currently uses normal kzalloc, ioremap, etc routines. This patch > replaces these routines with devm_kzalloc and devm_request_mem_region etc, so > that we don't need to handle freeing of resources for error cases and module > removal routine. > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit d2e8919bcfb63b662945d0e5cb9338f0f2229d10 > Author: Viresh Kumar <viresh.kumar@xxxxxx> > Date: Mon Mar 12 09:52:14 2012 +0530 > > watchdog: sp805: replace readl/writel with lighter _relaxed variants > > readl/writel versions for ARM contain memory barrier instruction for > synchronizing DMA buffers. These are not required at least on this > module. So use lighter _relaxed variants. > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit bfae14b679063d85f10579bbfd532db58b122e29 > Author: Viresh Kumar <viresh.kumar@xxxxxx> > Date: Mon Mar 12 09:52:13 2012 +0530 > > watchdog: sp805: Fix documentation style comment > > @ was missing before variables names, in their description. Also adev is > mentioned as dev in comment. Fix both these issues. > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 60a1aa50b2ca142a91455203ca2aa09502eddd20 > Author: Viresh Kumar <viresh.kumar@xxxxxx> > Date: Mon Mar 12 09:52:00 2012 +0530 > > watchdog: mpcore_wdt: Allow platform_get_irq() to fail > > irq is not necessary for mpcore wdt. Don't return error if it is not passed. But > if it is passed, then request_irq must pass. > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 75f5a536c0b605b9b8406325f51f62f67141973e > Author: Viresh Kumar <viresh.kumar@xxxxxx> > Date: Mon Mar 12 09:51:59 2012 +0530 > > watchdog: mpcore_wdt: Use devm routines > > mpcore_wdt driver currently uses normal kzalloc, request_irq, ioremap, etc > routines. This patch replaces these routines with devm_kzalloc and > devm_request_mem_region etc, so that we don't need to handle freeing of > resources for error cases and module removal routine. > > Also, request_irq is moved before registering misc device, so that we are ready > for irq as soon as device is registered. > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit aa065770f55f44ed24f0a9b76ec6e2135264d43b > Author: Viresh Kumar <viresh.kumar@xxxxxx> > Date: Mon Mar 12 09:51:58 2012 +0530 > > watchdog: mpcore_wdt: Rename dev to pdev for pointing to struct platform_device > > Pointer to struct platform_device is named as dev, which makes it confusing when > we write statements like dev->dev to access struct device within it. > > This patch renames such names to pdev. > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 38c484fa136f66224694af298f80e96bf4072700 > Author: Jan Beulich <JBeulich@xxxxxxxx> > Date: Mon Mar 19 09:32:28 2012 +0000 > > watchdog: xen: don't clear is_active when xen_wdt_stop() failed > > xen_wdt_release() shouldn't clear is_active even when the watchdog > didn't get stopped (which by itself shouldn't happen, but let's return > a proper error in this case rather than adding a BUG() upon hypercall > failure). > > Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 83448bf7867917d5fd104e65275d8e153f3293a8 > Author: Jan Beulich <JBeulich@xxxxxxxx> > Date: Mon Mar 19 09:30:33 2012 +0000 > > watchdog: xen: don't unconditionally enable the watchdog during resume > > This was found to be a problem particularly after guest migration. > > Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> > Reported-by: Wouter de Geus <benv-xensource.com@xxxxxxxxxxxxx> > Reported-by: Ian Campbell <Ian.Campbell@xxxxxxxxxx> > Tested-by: Wouter de Geus <benv-xensource.com@xxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit ccd4144dd41c32a284a5b040f87aaefed0361a21 > Author: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> > Date: Fri Mar 16 15:27:21 2012 +0900 > > watchdog: fix compiler error for missing parenthesis > > Joe's patch(watchdog: Use pr_<fmt> and pr_<level>) missed parenthesis in s3c2410_wdt.c. > > Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 697b41e4d4b20b8d8564f5501927b0ed07153990 > Author: Wim Van Sebroeck <wim@xxxxxxxxx> > Date: Tue Mar 13 09:06:12 2012 +0100 > > watchdog: ep93xx_wdt.c: fix platform probe > > Fix the device/driver init so that the misc_register > happens as last (since this opens userspace access to > the device). > > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 3e0113a896803f792ffdf19b016578420824573f > Author: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> > Date: Tue Mar 13 09:48:16 2012 +1100 > > watchdog: ep93xx: Convert the watchdog driver into a platform device. > > Convert the ep93xx watchdog driver into a platform device and > remove it's dependency on <mach/hardware.h>. > > Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> > Signed-off-by: Ryan Mallon <rmallon@xxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxx> > Acked-by: Arnd Bergmann <arnd@xxxxxxxx> > > commit 0197c1c49ef1ff386b2ebb6d3b0fc85a8e174b5c > Author: Wim Van Sebroeck <wim@xxxxxxxxx> > Date: Wed Feb 29 20:20:58 2012 +0100 > > watchdog: fix set_timeout operations > > Since we changed the behaviour of the set_timeout operation in the > watchdog API, we need to change the allready converted drivers so > that they update the timeout field at the end of the set_timeout > operation. > > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit b10f7c12e051762b84457f6d38d4b71acbf76a02 > Author: Hans de Goede <hdegoede@xxxxxxxxxx> > Date: Mon Sep 12 11:56:59 2011 +0200 > > watchdog: watchdog_dev: Let the driver update the timeout field on set_timeout success > > When a set_timeout operation succeeds this does not necessarily mean that > the exact timeout requested has been achieved, because the watchdog does not > necessarily have a 1 second resolution. So rather then have the core set > the timeout member of the watchdog_device struct to the exact requested > value, instead the driver should set it to the actually achieved timeout value. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit a5132cafc0a739107e51494b9054c0066802b8cd > Author: Alan Cox <alan@xxxxxxxxxxxxxxx> > Date: Tue Feb 28 22:48:11 2012 +0000 > > watchdog: softdog: convert to watchdog core > > Convert softdog.c to the new watchdog API. > > Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit a0f3683365513c052d21991fe75eccd95aba9d34 > Author: Axel Lin <axel.lin@xxxxxxxxx> > Date: Wed Feb 8 14:24:10 2012 +0800 > > watchdog: Convert max63xx_wdt driver to watchdog framework > > This patch converts max63xx_wdt driver to watchdog framework. > Also use devm_* APIs to save a few error handling code. > > Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 6b1e83869d13a6b5ce9ceb4b8f79a7538d467dee > Author: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Date: Thu Feb 2 18:48:11 2012 +0100 > > watchdog: pnx4008: convert driver to use the watchdog framework > > Make this driver a user of the watchdog framework and remove parts now handled > by the core. Tested on a custom lpc32xx-board. > > [wim@xxxxxxxxx: Added set_timeout operation] > Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 2e51d90f4db6c94bc75c6ff22e959237f3cc27ba > Author: Axel Lin <axel.lin@xxxxxxxxx> > Date: Mon Jan 23 15:26:59 2012 +0800 > > watchdog: Convert wm8350_wdt driver to watchdog core > > This patch converts wm8350_wdt driver to use watchdog core APIs. > > Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 85f6df1492ff8b620cf601a1509520d2b89858dd > Author: Axel Lin <axel.lin@xxxxxxxxx> > Date: Thu Jan 26 18:10:45 2012 +0800 > > watchdog: Convert jz4740_wdt driver to watchdog core > > This patch converts jz4740_wdt driver to use watchdog core APIs. > Also use devm_* APIs to save a few error handling code. > > Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx> > Acked-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> > Reviewed-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 86a1e1896c2710402e29a875d8d830244274244d > Author: Wim Van Sebroeck <wim@xxxxxxxxx> > Date: Mon Mar 5 16:51:11 2012 +0100 > > watchdog: nowayout is bool > > nowayout is actually a boolean value. > So make it bool for all watchdog device drivers. > > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 27c766aaacb265d625dc634bf7903f7f9fd0c697 > Author: Joe Perches <joe@xxxxxxxxxxx> > Date: Wed Feb 15 15:06:19 2012 -0800 > > watchdog: Use pr_<fmt> and pr_<level> > > Use the current logging styles. > > Make sure all output has a prefix. > Add missing newlines. > Remove now unnecessary PFX, NAME, and miscellaneous other #defines. > Coalesce formats. > > Signed-off-by: Joe Perches <joe@xxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 7cbc353540c31ffaf65ad44d89b955be0f1d04dc > Author: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Date: Thu Feb 2 18:48:09 2012 +0100 > > watchdog: pnx4008: don't use __raw_-accessors > > __raw_readl/__raw_writel are not meant for drivers [1]. > > [1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/117626 > > Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 19f505f09c60d637c695a8e8c4768570e2309631 > Author: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Date: Thu Feb 2 18:48:08 2012 +0100 > > watchdog: pnx4008: cleanup resource handling using managed devices > > The resource handling in this driver was flaky: IO_ADDRESS instead of > ioremap (and no unmapping), an unneeded static resource, no central exit > path for error cases. Fix this by converting the driver to use managed > resources. Also use dev_*-messages instead of pr_* while we are here. > > Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 16ac4abe0d0ea0a8d42d6a2a7de2a4a00bbf5b40 > Author: Viresh Kumar <viresh.kumar@xxxxxx> > Date: Fri Feb 24 15:12:37 2012 +0530 > > watchdog: sp805_wdt: add pm callbacks to support standby/S2R/hibernation > > Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 474ef121008a2992bcc496930166ced89bda23d2 > Author: Oskar Schirmer <oskar@xxxxxxxxx> > Date: Thu Feb 16 12:17:45 2012 +0000 > > watchdog: make imx2_wdt report boot status correctly > > Ioctl WDIOC_GETBOOTSTATUS is supposed to return some information > on why the system did (re)boot recently, value WDIOF_CARDRESET > being used to indicate watchdog induced reboot. > > Up to now, imx2_wdt did not provide a value here, always returning > zero to indicate normal boot. > > Do evaluate the IMX Watchdog Reset Status Register and > produce WDIOF_CARDRESET with WDIOC_GETBOOTSTATUS in case > of a watchdog induced reset. > > Signed-off-by: Oskar Schirmer <oskar@xxxxxxxxx> > Acked-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > commit 5ba927e8ca3f73acb98f417d126652e26ab40a57 > Author: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Date: Mon Jan 23 20:17:38 2012 +0100 > > watchdog: documentation: remove index-file > > The 00-index file in the watchdog directory is, like many others, > outdated (conversion-howto is missing) and doesn't contain worthwhile > additional information. As it seems to be a maintenance burden without > much gain, simply remove it. > > Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx> > Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxx> > > > Diffstat: > Documentation/watchdog/00-INDEX | 19 > b/Documentation/watchdog/convert_drivers_to_kernel_api.txt | 4 > b/Documentation/watchdog/watchdog-kernel-api.txt | 11 > b/arch/arm/mach-ep93xx/core.c | 15 > b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 > b/drivers/char/ipmi/ipmi_watchdog.c | 4 > b/drivers/hwmon/fschmd.c | 4 > b/drivers/hwmon/w83793.c | 4 > b/drivers/staging/mei/wd.c | 1 > b/drivers/watchdog/Kconfig | 8 > b/drivers/watchdog/acquirewdt.c | 28 - > b/drivers/watchdog/advantechwdt.c | 34 - > b/drivers/watchdog/alim1535_wdt.c | 25 - > b/drivers/watchdog/alim7101_wdt.c | 55 -- > b/drivers/watchdog/ar7_wdt.c | 38 - > b/drivers/watchdog/at32ap700x_wdt.c | 4 > b/drivers/watchdog/at91rm9200_wdt.c | 14 > b/drivers/watchdog/at91sam9_wdt.c | 12 > b/drivers/watchdog/ath79_wdt.c | 9 > b/drivers/watchdog/bcm47xx_wdt.c | 18 > b/drivers/watchdog/bcm63xx_wdt.c | 11 > b/drivers/watchdog/bfin_wdt.c | 31 - > b/drivers/watchdog/booke_wdt.c | 14 > b/drivers/watchdog/coh901327_wdt.c | 206 +++------- > b/drivers/watchdog/cpu5wdt.c | 19 > b/drivers/watchdog/cpwd.c | 20 > b/drivers/watchdog/dw_wdt.c | 7 > b/drivers/watchdog/ep93xx_wdt.c | 251 ++++-------- > b/drivers/watchdog/eurotechwdt.c | 32 - > b/drivers/watchdog/f71808e_wdt.c | 40 - > b/drivers/watchdog/gef_wdt.c | 15 > b/drivers/watchdog/geodewdt.c | 9 > b/drivers/watchdog/hpwdt.c | 31 - > b/drivers/watchdog/i6300esb.c | 39 - > b/drivers/watchdog/iTCO_vendor_support.c | 7 > b/drivers/watchdog/iTCO_wdt.c | 59 +- > b/drivers/watchdog/ib700wdt.c | 26 - > b/drivers/watchdog/ibmasr.c | 18 > b/drivers/watchdog/imx2_wdt.c | 14 > b/drivers/watchdog/indydog.c | 24 - > b/drivers/watchdog/intel_scu_watchdog.c | 71 +-- > b/drivers/watchdog/intel_scu_watchdog.h | 1 > b/drivers/watchdog/iop_wdt.c | 15 > b/drivers/watchdog/it8712f_wdt.c | 39 - > b/drivers/watchdog/it87_wdt.c | 46 -- > b/drivers/watchdog/ixp2000_wdt.c | 11 > b/drivers/watchdog/ixp4xx_wdt.c | 15 > b/drivers/watchdog/jz4740_wdt.c | 265 ++++--------- > b/drivers/watchdog/ks8695_wdt.c | 10 > b/drivers/watchdog/lantiq_wdt.c | 8 > b/drivers/watchdog/m54xx_wdt.c | 14 > b/drivers/watchdog/machzwd.c | 37 - > b/drivers/watchdog/max63xx_wdt.c | 194 +-------- > b/drivers/watchdog/mixcomwd.c | 29 - > b/drivers/watchdog/mpc8xxx_wdt.c | 17 > b/drivers/watchdog/mpcore_wdt.c | 111 ++--- > b/drivers/watchdog/mv64x60_wdt.c | 15 > b/drivers/watchdog/nuc900_wdt.c | 4 > b/drivers/watchdog/nv_tco.c | 46 +- > b/drivers/watchdog/octeon-wdt-main.c | 16 > b/drivers/watchdog/of_xilinx_wdt.c | 41 -- > b/drivers/watchdog/omap_wdt.c | 4 > b/drivers/watchdog/orion_wdt.c | 15 > b/drivers/watchdog/pc87413_wdt.c | 57 +- > b/drivers/watchdog/pcwd.c | 127 ++---- > b/drivers/watchdog/pcwd_pci.c | 113 ++--- > b/drivers/watchdog/pcwd_usb.c | 78 +-- > b/drivers/watchdog/pika_wdt.c | 23 - > b/drivers/watchdog/pnx4008_wdt.c | 263 +++--------- > b/drivers/watchdog/pnx833x_wdt.c | 30 - > b/drivers/watchdog/rc32434_wdt.c | 33 - > b/drivers/watchdog/riowd.c | 10 > b/drivers/watchdog/s3c2410_wdt.c | 31 - > b/drivers/watchdog/sa1100_wdt.c | 10 > b/drivers/watchdog/sb_wdog.c | 28 - > b/drivers/watchdog/sbc60xxwdt.c | 41 -- > b/drivers/watchdog/sbc7240_wdt.c | 44 -- > b/drivers/watchdog/sbc8360.c | 24 - > b/drivers/watchdog/sbc_epx_c3.c | 23 - > b/drivers/watchdog/sbc_fitpc2_wdt.c | 13 > b/drivers/watchdog/sc1200wdt.c | 34 - > b/drivers/watchdog/sc520_wdt.c | 39 - > b/drivers/watchdog/sch311x_wdt.c | 17 > b/drivers/watchdog/scx200_wdt.c | 25 - > b/drivers/watchdog/shwdt.c | 19 > b/drivers/watchdog/smsc37b787_wdt.c | 42 -- > b/drivers/watchdog/softdog.c | 211 ++-------- > b/drivers/watchdog/sp5100_tco.c | 35 - > b/drivers/watchdog/sp805_wdt.c | 111 +++-- > b/drivers/watchdog/stmp3xxx_wdt.c | 8 > b/drivers/watchdog/ts72xx_wdt.c | 4 > b/drivers/watchdog/twl4030_wdt.c | 4 > b/drivers/watchdog/txx9wdt.c | 184 ++------- > b/drivers/watchdog/via_wdt.c | 13 > b/drivers/watchdog/w83627hf_wdt.c | 38 - > b/drivers/watchdog/w83697hf_wdt.c | 43 -- > b/drivers/watchdog/w83697ug_wdt.c | 38 - > b/drivers/watchdog/w83877f_wdt.c | 40 - > b/drivers/watchdog/w83977f_wdt.c | 38 - > b/drivers/watchdog/wafer5823wdt.c | 34 - > b/drivers/watchdog/watchdog_core.c | 4 > b/drivers/watchdog/watchdog_dev.c | 16 > b/drivers/watchdog/wdrtas.c | 71 +-- > b/drivers/watchdog/wdt.c | 55 +- > b/drivers/watchdog/wdt285.c | 12 > b/drivers/watchdog/wdt977.c | 40 - > b/drivers/watchdog/wdt_pci.c | 70 +-- > b/drivers/watchdog/wm831x_wdt.c | 6 > b/drivers/watchdog/wm8350_wdt.c | 223 ++-------- > b/drivers/watchdog/xen_wdt.c | 42 +- > b/include/linux/watchdog.h | 4 > 111 files changed, 1829 insertions(+), 2844 deletions(-) > > -- > To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
