Re: [PATCH V5 net-next 3/3] virtio-net: synchronize operstate with admin state on up/down

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 5, 2024 at 1:52 PM Michael S. Tsirkin <mst@xxxxxxxxxx> wrote:
>
> On Mon, Aug 05, 2024 at 11:02:42AM +0800, Jason Wang wrote:
> > This patch synchronize operstate with admin state per RFC2863.
>
>
> synchronizes
>
> >
> > This is done by trying to toggle the carrier upon open/close and
> > synchronize with the config change work. This allows propagate status
>
> to propagate

Will fix.

>
> > correctly to stacked devices like:
> >
> > ip link add link enp0s3 macvlan0 type macvlan
> > ip link set link enp0s3 down
> > ip link show
> >
> > Before this patch:
> >
> > 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> >     link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> > ......
> > 5: macvlan0@enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
> >     link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
> >
> > After this patch:
> >
> > 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> >     link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> > ...
> > 5: macvlan0@enp0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
> >     link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
>
> Add an empty line here pls.
>
> > Cc: Venkat Venkatsubra <venkat.x.venkatsubra@xxxxxxxxxx>
> > Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@xxxxxxxxxx>
> > Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> > ---
> >  drivers/net/virtio_net.c | 78 +++++++++++++++++++++++++---------------
> >  1 file changed, 50 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > index 0383a3e136d6..fc5196ca8d51 100644
> > --- a/drivers/net/virtio_net.c
> > +++ b/drivers/net/virtio_net.c
> > @@ -2885,6 +2885,25 @@ static void virtnet_cancel_dim(struct virtnet_info *vi, struct dim *dim)
> >       net_dim_work_cancel(dim);
> >  }
> >
> > +static void virtnet_update_settings(struct virtnet_info *vi)
> > +{
> > +     u32 speed;
> > +     u8 duplex;
> > +
> > +     if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> > +             return;
> > +
> > +     virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> > +
> > +     if (ethtool_validate_speed(speed))
> > +             vi->speed = speed;
> > +
> > +     virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> > +
> > +     if (ethtool_validate_duplex(duplex))
> > +             vi->duplex = duplex;
> > +}
> > +
> >  static int virtnet_open(struct net_device *dev)
> >  {
> >       struct virtnet_info *vi = netdev_priv(dev);
> > @@ -2903,6 +2922,15 @@ static int virtnet_open(struct net_device *dev)
> >                       goto err_enable_qp;
> >       }
> >
> > +     if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> > +             if (vi->status & VIRTIO_NET_S_LINK_UP)
> > +                     netif_carrier_on(vi->dev);
> > +             virtio_config_driver_enable(vi->vdev);
> > +     } else {
> > +             vi->status = VIRTIO_NET_S_LINK_UP;
> > +             netif_carrier_on(dev);
> > +     }
> > +
> >       return 0;
> >
> >  err_enable_qp:
> > @@ -3381,12 +3409,22 @@ static int virtnet_close(struct net_device *dev)
> >       disable_delayed_refill(vi);
> >       /* Make sure refill_work doesn't re-enable napi! */
> >       cancel_delayed_work_sync(&vi->refill);
> > +     /* Prevent the config change callback from changing carrier
> > +      * after close
> > +      */
> > +     virtio_config_driver_disable(vi->vdev);
> > +     /* Stop getting status/speed updates: we don't care until next
> > +      * open
> > +      */
> > +     cancel_work_sync(&vi->config_work);
> >
> >       for (i = 0; i < vi->max_queue_pairs; i++) {
> >               virtnet_disable_queue_pair(vi, i);
> >               virtnet_cancel_dim(vi, &vi->rq[i].dim);
> >       }
> >
> > +     netif_carrier_off(dev);
> > +
> >       return 0;
> >  }
> >
> > @@ -5085,25 +5123,6 @@ static void virtnet_init_settings(struct net_device *dev)
> >       vi->duplex = DUPLEX_UNKNOWN;
> >  }
> >
> > -static void virtnet_update_settings(struct virtnet_info *vi)
> > -{
> > -     u32 speed;
> > -     u8 duplex;
> > -
> > -     if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> > -             return;
> > -
> > -     virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> > -
> > -     if (ethtool_validate_speed(speed))
> > -             vi->speed = speed;
> > -
> > -     virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> > -
> > -     if (ethtool_validate_duplex(duplex))
> > -             vi->duplex = duplex;
> > -}
> > -
> >  static u32 virtnet_get_rxfh_key_size(struct net_device *dev)
> >  {
> >       return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;
> > @@ -6514,6 +6533,9 @@ static int virtnet_probe(struct virtio_device *vdev)
> >               goto free_failover;
> >       }
> >
> > +     /* Disable config change notification until ndo_open. */
> > +     virtio_config_driver_disable(vi->vdev);
> > +
> >       virtio_device_ready(vdev);
> >
> >       virtnet_set_queues(vi, vi->curr_queue_pairs);
> > @@ -6563,25 +6585,25 @@ static int virtnet_probe(struct virtio_device *vdev)
> >               vi->device_stats_cap = le64_to_cpu(v);
> >       }
> >
> > -     rtnl_unlock();
> > -
> > -     err = virtnet_cpu_notif_add(vi);
> > -     if (err) {
> > -             pr_debug("virtio_net: registering cpu notifier failed\n");
> > -             goto free_unregister_netdev;
> > -     }
> > -
> >       /* Assume link up if device can't report link status,
> >          otherwise get link status from config. */
> >       netif_carrier_off(dev);
> >       if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> > -             schedule_work(&vi->config_work);
> > +             virtnet_config_changed_work(&vi->config_work);
> >       } else {
> >               vi->status = VIRTIO_NET_S_LINK_UP;
> >               virtnet_update_settings(vi);
> >               netif_carrier_on(dev);
> >       }
> >
> > +     rtnl_unlock();
>
>
> OK I guess you are moving rtnl to make sure this does not
> run in parallel with ndo_open/close.
> I do, however, wonder whether ndo_set_features
> can happen before guest_offloads_capable calculation below.
> WDYT?

I think it can and it needs another patch to fix (probably on top).

Thanks

>
> > +     err = virtnet_cpu_notif_add(vi);
> > +     if (err) {
> > +             pr_debug("virtio_net: registering cpu notifier failed\n");
> > +             goto free_unregister_netdev;
> > +     }
> > +
> >       for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
> >               if (virtio_has_feature(vi->vdev, guest_offloads[i]))
> >                       set_bit(guest_offloads[i], &vi->guest_offloads);
> > --
> > 2.31.1
>






[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux