On Thu, Aug 01, 2024 at 02:13:49PM +0800, Jason Wang wrote:
> On Thu, Aug 1, 2024 at 2:06 PM Michael S. Tsirkin <mst@xxxxxxxxxx> wrote:
> >
> > On Wed, Jul 31, 2024 at 10:59:47AM +0800, Jason Wang wrote:
> > > This patch synchronize operstate with admin state per RFC2863.
> > >
> > > This is done by trying to toggle the carrier upon open/close and
> > > synchronize with the config change work. This allows propagate status
> > > correctly to stacked devices like:
> > >
> > > ip link add link enp0s3 macvlan0 type macvlan
> > > ip link set link enp0s3 down
> > > ip link show
> > >
> > > Before this patch:
> > >
> > > 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> > > link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> > > ......
> > > 5: macvlan0@enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
> > > link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
> > >
> > > After this patch:
> > >
> > > 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> > > link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> > > ...
> > > 5: macvlan0@enp0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
> > > link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
> > >
> > > Cc: Venkat Venkatsubra <venkat.x.venkatsubra@xxxxxxxxxx>
> > > Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@xxxxxxxxxx>
> > > Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> > > ---
> > > drivers/net/virtio_net.c | 84 ++++++++++++++++++++++++++--------------
> > > 1 file changed, 54 insertions(+), 30 deletions(-)
> > >
> > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > index 0383a3e136d6..0cb93261eba1 100644
> > > --- a/drivers/net/virtio_net.c
> > > +++ b/drivers/net/virtio_net.c
> > > @@ -2878,6 +2878,7 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index)
> > > return err;
> > > }
> > >
> > > +
> > > static void virtnet_cancel_dim(struct virtnet_info *vi, struct dim *dim)
> > > {
> > > if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_VQ_NOTF_COAL))
> > > @@ -2885,6 +2886,25 @@ static void virtnet_cancel_dim(struct virtnet_info *vi, struct dim *dim)
> > > net_dim_work_cancel(dim);
> > > }
> > >
> > > +static void virtnet_update_settings(struct virtnet_info *vi)
> > > +{
> > > + u32 speed;
> > > + u8 duplex;
> > > +
> > > + if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> > > + return;
> > > +
> > > + virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> > > +
> > > + if (ethtool_validate_speed(speed))
> > > + vi->speed = speed;
> > > +
> > > + virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> > > +
> > > + if (ethtool_validate_duplex(duplex))
> > > + vi->duplex = duplex;
> > > +}
> > > +
> > > static int virtnet_open(struct net_device *dev)
> > > {
> > > struct virtnet_info *vi = netdev_priv(dev);
> > > @@ -2903,6 +2923,16 @@ static int virtnet_open(struct net_device *dev)
> > > goto err_enable_qp;
> > > }
> > >
> > > + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> > > + if (vi->status & VIRTIO_NET_S_LINK_UP)
> > > + netif_carrier_on(vi->dev);
> > > + virtio_config_driver_enable(vi->vdev);
> > > + } else {
> > > + vi->status = VIRTIO_NET_S_LINK_UP;
> > > + netif_carrier_on(dev);
> > > + virtnet_update_settings(vi);
> > > + }
> > > +
> > > return 0;
> > >
> > > err_enable_qp:
> > > @@ -3381,12 +3411,18 @@ static int virtnet_close(struct net_device *dev)
> > > disable_delayed_refill(vi);
> > > /* Make sure refill_work doesn't re-enable napi! */
> > > cancel_delayed_work_sync(&vi->refill);
> > > + /* Make sure config notification doesn't schedule config work */
> > > + virtio_config_driver_disable(vi->vdev);
> > > + /* Make sure status updating is cancelled */
> > > + cancel_work_sync(&vi->config_work);
> > >
> > > for (i = 0; i < vi->max_queue_pairs; i++) {
> > > virtnet_disable_queue_pair(vi, i);
> > > virtnet_cancel_dim(vi, &vi->rq[i].dim);
> > > }
> > >
> > > + netif_carrier_off(dev);
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -5085,25 +5121,6 @@ static void virtnet_init_settings(struct net_device *dev)
> > > vi->duplex = DUPLEX_UNKNOWN;
> > > }
> > >
> > > -static void virtnet_update_settings(struct virtnet_info *vi)
> > > -{
> > > - u32 speed;
> > > - u8 duplex;
> > > -
> > > - if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> > > - return;
> > > -
> > > - virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> > > -
> > > - if (ethtool_validate_speed(speed))
> > > - vi->speed = speed;
> > > -
> > > - virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> > > -
> > > - if (ethtool_validate_duplex(duplex))
> > > - vi->duplex = duplex;
> > > -}
> > > -
> > > static u32 virtnet_get_rxfh_key_size(struct net_device *dev)
> > > {
> > > return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;
> > > @@ -6514,6 +6531,11 @@ static int virtnet_probe(struct virtio_device *vdev)
> > > goto free_failover;
> > > }
> > >
> > > + /* Forbid config change notification until ndo_open. */
> > > + virtio_config_driver_disable(vi->vdev);
> > > + /* Make sure status updating work is done */
> >
> > Wait a second, how can anything run here, this is probe,
> > config change callbacks are never invoked at all.
>
> For buggy devices.
buggy or not, virtio core will not invoke callbacks until
after probe and scan.
> >
> > > + cancel_work_sync(&vi->config_work);
> > > +
> >
> >
> > this is pointless, too.
> >
> > > virtio_device_ready(vdev);
> > >
> > > virtnet_set_queues(vi, vi->curr_queue_pairs);
> > > @@ -6563,6 +6585,19 @@ static int virtnet_probe(struct virtio_device *vdev)
> > > vi->device_stats_cap = le64_to_cpu(v);
> > > }
> > >
> > > + /* Assume link up if device can't report link status,
> > > + otherwise get link status from config. */
> > > + netif_carrier_off(dev);
> > > + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> > > + /* This is safe as config notification change has been
> > > + disabled. */
> >
> > What "this"? pls explain what this does: get config data from
> > device.
> >
> > Actually not because it was disabled. probe can poke at
> > config with impunity no change callbacks trigger during probe.
>
> Only if we have a good device.
not if you read the core code.
> >
> > > + virtnet_config_changed_work(&vi->config_work);
> >
> >
> >
>
> Thanks
>
>
> >
> > > + } else {
> > > + vi->status = VIRTIO_NET_S_LINK_UP;
> > > + virtnet_update_settings(vi);
> > > + netif_carrier_on(dev);
> > > + }
> > > +
> > > rtnl_unlock();
> > >
> > > err = virtnet_cpu_notif_add(vi);
> > > @@ -6571,17 +6606,6 @@ static int virtnet_probe(struct virtio_device *vdev)
> > > goto free_unregister_netdev;
> > > }
> > >
> > > - /* Assume link up if device can't report link status,
> > > - otherwise get link status from config. */
> > > - netif_carrier_off(dev);
> > > - if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> > > - schedule_work(&vi->config_work);
> > > - } else {
> > > - vi->status = VIRTIO_NET_S_LINK_UP;
> > > - virtnet_update_settings(vi);
> > > - netif_carrier_on(dev);
> > > - }
> > > -
> > > for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
> > > if (virtio_has_feature(vi->vdev, guest_offloads[i]))
> > > set_bit(guest_offloads[i], &vi->guest_offloads);
> > > --
> > > 2.31.1
> >
