On Tue, Jul 23, 2024 at 01:39:20PM +0800, Cindy Lu wrote:
> Add new UAPI to support the mac address from vdpa tool
> Function vdpa_nl_cmd_dev_attr_set_doit() will get the
> new MAC address from the vdpa tool and then set it to the device.
>
> The usage is: vdpa dev set name vdpa_name mac **:**:**:**:**:**
>
> Here is example:
> root@L1# vdpa -jp dev config show vdpa0
> {
> "config": {
> "vdpa0": {
> "mac": "82:4d:e9:5d:d7:e6",
> "link ": "up",
> "link_announce ": false,
> "mtu": 1500
> }
> }
> }
>
> root@L1# vdpa dev set name vdpa0 mac 00:11:22:33:44:55
>
> root@L1# vdpa -jp dev config show vdpa0
> {
> "config": {
> "vdpa0": {
> "mac": "00:11:22:33:44:55",
> "link ": "up",
> "link_announce ": false,
> "mtu": 1500
> }
> }
> }
>
> Signed-off-by: Cindy Lu <lulu@xxxxxxxxxx>
> ---
> drivers/vdpa/vdpa.c | 84 +++++++++++++++++++++++++++++++++++++++
> include/linux/vdpa.h | 9 +++++
> include/uapi/linux/vdpa.h | 1 +
> 3 files changed, 94 insertions(+)
>
> diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
> index 8d391947eb8d..07d61ee62839 100644
> --- a/drivers/vdpa/vdpa.c
> +++ b/drivers/vdpa/vdpa.c
> @@ -1361,6 +1361,85 @@ static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct genl_info
> return err;
> }
>
> +static int vdpa_dev_net_device_attr_set(struct vdpa_device *vdev,
> + struct genl_info *info)
> +{
> + struct vdpa_dev_set_config set_config = {};
> + const u8 *macaddr;
> + struct vdpa_mgmt_dev *mdev = vdev->mdev;
> + struct nlattr **nl_attrs = info->attrs;
> + int err = -EINVAL;
> +
> + if (!vdev->mdev)
> + return -EINVAL;
> +
> + down_write(&vdev->cf_lock);
> + if ((mdev->supported_features & BIT_ULL(VIRTIO_NET_F_MAC)) &&
> + nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]) {
> + set_config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR);
> + macaddr = nla_data(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]);
> +
> + if (is_valid_ether_addr(macaddr)) {
> + memcpy(set_config.net.mac, macaddr, ETH_ALEN);
> + if (mdev->ops->dev_set_attr) {
> + err = mdev->ops->dev_set_attr(mdev, vdev,
> + &set_config);
> + } else {
> + NL_SET_ERR_MSG_FMT_MOD(info->extack,
> + "device not supported");
> + }
> + } else {
> + NL_SET_ERR_MSG_FMT_MOD(info->extack,
> + "Invalid MAC address");
> + }
> + }
> + up_write(&vdev->cf_lock);
> + return err;
> +}
> +static int vdpa_nl_cmd_dev_attr_set_doit(struct sk_buff *skb,
> + struct genl_info *info)
> +{
> + const char *name;
> + int err = 0;
> + struct device *dev;
> + struct vdpa_device *vdev;
> + u64 classes;
> +
> + if (!info->attrs[VDPA_ATTR_DEV_NAME])
> + return -EINVAL;
> +
> + name = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
> +
> + down_write(&vdpa_dev_lock);
> + dev = bus_find_device(&vdpa_bus, NULL, name, vdpa_name_match);
> + if (!dev) {
> + NL_SET_ERR_MSG_MOD(info->extack, "device not found");
> + err = -ENODEV;
> + goto dev_err;
> + }
> + vdev = container_of(dev, struct vdpa_device, dev);
> + if (!vdev->mdev) {
> + NL_SET_ERR_MSG_MOD(
> + info->extack,
> + "Fail to find the specified management device");
> + err = -EINVAL;
> + goto mdev_err;
> + }
> + classes = vdpa_mgmtdev_get_classes(vdev->mdev, NULL);
> + if (classes & BIT_ULL(VIRTIO_ID_NET)) {
> + err = vdpa_dev_net_device_attr_set(vdev, info);
> + } else {
> + NL_SET_ERR_MSG_FMT_MOD(info->extack, "%s device not supported",
> + name);
> + }
> +
> +mdev_err:
> + put_device(dev);
> +dev_err:
> + up_write(&vdpa_dev_lock);
> + return err;
> +}
> +
> static int vdpa_dev_config_dump(struct device *dev, void *data)
> {
> struct vdpa_device *vdev = container_of(dev, struct vdpa_device, dev);
> @@ -1497,6 +1576,11 @@ static const struct genl_ops vdpa_nl_ops[] = {
> .doit = vdpa_nl_cmd_dev_stats_get_doit,
> .flags = GENL_ADMIN_PERM,
> },
> + {
> + .cmd = VDPA_CMD_DEV_ATTR_SET,
> + .doit = vdpa_nl_cmd_dev_attr_set_doit,
> + .flags = GENL_ADMIN_PERM,
> + },
> };
>
> static struct genl_family vdpa_nl_family __ro_after_init = {
> diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h
> index 7977ca03ac7a..3511156c10db 100644
> --- a/include/linux/vdpa.h
> +++ b/include/linux/vdpa.h
> @@ -582,11 +582,20 @@ void vdpa_set_status(struct vdpa_device *vdev, u8 status);
> * @dev: vdpa device to remove
> * Driver need to remove the specified device by calling
> * _vdpa_unregister_device().
> + * @dev_set_attr: change a vdpa device's attr after it was create
> + * @mdev: parent device to use for device
The indentation looks a bit odd here.
Andrew
---
pw-bot: cr
