Remove VMWARE_CMD macro and move to vmware_hypercall API.
No functional changes intended.
Use u32/u64 instead of uint32_t/uint64_t across the file
Signed-off-by: Alexey Makhalov <alexey.makhalov@xxxxxxxxxxxx>
---
arch/x86/kernel/cpu/vmware.c | 95 ++++++++++--------------------------
1 file changed, 25 insertions(+), 70 deletions(-)
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 533ac2d1de88..c0a3ffa9e023 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -49,54 +49,16 @@
#define STEALCLOCK_DISABLED 0
#define STEALCLOCK_ENABLED 1
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
-
struct vmware_steal_time {
union {
- uint64_t clock; /* stolen time counter in units of vtsc */
+ u64 clock; /* stolen time counter in units of vtsc */
struct {
/* only for little-endian */
- uint32_t clock_low;
- uint32_t clock_high;
+ u32 clock_low;
+ u32 clock_high;
};
};
- uint64_t reserved[7];
+ u64 reserved[7];
};
static unsigned long vmware_tsc_khz __ro_after_init;
@@ -154,9 +116,10 @@ unsigned long vmware_hypercall_slow(unsigned long cmd,
static inline int __vmware_platform(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVERSION, eax, ebx, ecx, edx);
- return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
+ u32 eax, ebx, ecx;
+
+ eax = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &ebx, &ecx);
+ return eax != UINT_MAX && ebx == VMWARE_HYPERVISOR_MAGIC;
}
static unsigned long vmware_get_tsc_khz(void)
@@ -208,21 +171,12 @@ static void __init vmware_cyc2ns_setup(void)
pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
}
-static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+static int vmware_cmd_stealclock(u32 addr_hi, u32 addr_lo)
{
- uint32_t result, info;
-
- asm volatile (VMWARE_HYPERCALL :
- "=a"(result),
- "=c"(info) :
- "a"(VMWARE_HYPERVISOR_MAGIC),
- "b"(0),
- "c"(VMWARE_CMD_STEALCLOCK),
- "d"(0),
- "S"(arg1),
- "D"(arg2) :
- "memory");
- return result;
+ u32 info;
+
+ return vmware_hypercall5(VMWARE_CMD_STEALCLOCK, 0, 0, addr_hi, addr_lo,
+ &info);
}
static bool stealclock_enable(phys_addr_t pa)
@@ -257,15 +211,15 @@ static bool vmware_is_stealclock_available(void)
* Return:
* The steal clock reading in ns.
*/
-static uint64_t vmware_steal_clock(int cpu)
+static u64 vmware_steal_clock(int cpu)
{
struct vmware_steal_time *steal = &per_cpu(vmw_steal_time, cpu);
- uint64_t clock;
+ u64 clock;
if (IS_ENABLED(CONFIG_64BIT))
clock = READ_ONCE(steal->clock);
else {
- uint32_t initial_high, low, high;
+ u32 initial_high, low, high;
do {
initial_high = READ_ONCE(steal->clock_high);
@@ -277,7 +231,7 @@ static uint64_t vmware_steal_clock(int cpu)
high = READ_ONCE(steal->clock_high);
} while (initial_high != high);
- clock = ((uint64_t)high << 32) | low;
+ clock = ((u64)high << 32) | low;
}
return mul_u64_u32_shr(clock, vmware_cyc2ns.cyc2ns_mul,
@@ -431,13 +385,13 @@ static void __init vmware_set_capabilities(void)
static void __init vmware_platform_setup(void)
{
- uint32_t eax, ebx, ecx, edx;
- uint64_t lpj, tsc_khz;
+ u32 eax, ebx, ecx;
+ u64 lpj, tsc_khz;
- VMWARE_CMD(GETHZ, eax, ebx, ecx, edx);
+ eax = vmware_hypercall3(VMWARE_CMD_GETHZ, UINT_MAX, &ebx, &ecx);
if (ebx != UINT_MAX) {
- lpj = tsc_khz = eax | (((uint64_t)ebx) << 32);
+ lpj = tsc_khz = eax | (((u64)ebx) << 32);
do_div(tsc_khz, 1000);
WARN_ON(tsc_khz >> 32);
pr_info("TSC freq read from hypervisor : %lu.%03lu MHz\n",
@@ -488,7 +442,7 @@ static u8 __init vmware_select_hypercall(void)
* If !boot_cpu_has(X86_FEATURE_HYPERVISOR), vmware_hypercall_mode
* intentionally defaults to 0.
*/
-static uint32_t __init vmware_platform(void)
+static u32 __init vmware_platform(void)
{
if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
unsigned int eax;
@@ -516,8 +470,9 @@ static uint32_t __init vmware_platform(void)
/* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
static bool __init vmware_legacy_x2apic_available(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
+ u32 eax;
+
+ eax = vmware_hypercall1(VMWARE_CMD_GETVCPU_INFO, 0);
return !(eax & BIT(VMWARE_CMD_VCPU_RESERVED)) &&
(eax & BIT(VMWARE_CMD_LEGACY_X2APIC));
}
--
2.39.4
