Re: [PATCH v5 04/22] drivers/perf: riscv: Use BIT macro for shifting operations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 03, 2024 at 01:04:33AM -0700, Atish Patra wrote:
> It is a good practice to use BIT() instead of (1UL << x).

(1UL << x) isn't generally a problem. The problem is with (1 << x).

> Replace the current usages with BIT().
> 
> Signed-off-by: Atish Patra <atishp@xxxxxxxxxxxx>
> ---
>  arch/riscv/include/asm/sbi.h | 20 ++++++++++----------
>  drivers/perf/riscv_pmu_sbi.c |  2 +-
>  2 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
> index ef8311dafb91..4afa2cd01bae 100644
> --- a/arch/riscv/include/asm/sbi.h
> +++ b/arch/riscv/include/asm/sbi.h
> @@ -233,20 +233,20 @@ enum sbi_pmu_ctr_type {
>  #define SBI_PMU_EVENT_IDX_INVALID 0xFFFFFFFF
>  
>  /* Flags defined for config matching function */
> -#define SBI_PMU_CFG_FLAG_SKIP_MATCH	(1 << 0)
> -#define SBI_PMU_CFG_FLAG_CLEAR_VALUE	(1 << 1)
> -#define SBI_PMU_CFG_FLAG_AUTO_START	(1 << 2)
> -#define SBI_PMU_CFG_FLAG_SET_VUINH	(1 << 3)
> -#define SBI_PMU_CFG_FLAG_SET_VSINH	(1 << 4)
> -#define SBI_PMU_CFG_FLAG_SET_UINH	(1 << 5)
> -#define SBI_PMU_CFG_FLAG_SET_SINH	(1 << 6)
> -#define SBI_PMU_CFG_FLAG_SET_MINH	(1 << 7)
> +#define SBI_PMU_CFG_FLAG_SKIP_MATCH	BIT(0)
> +#define SBI_PMU_CFG_FLAG_CLEAR_VALUE	BIT(1)
> +#define SBI_PMU_CFG_FLAG_AUTO_START	BIT(2)
> +#define SBI_PMU_CFG_FLAG_SET_VUINH	BIT(3)
> +#define SBI_PMU_CFG_FLAG_SET_VSINH	BIT(4)
> +#define SBI_PMU_CFG_FLAG_SET_UINH	BIT(5)
> +#define SBI_PMU_CFG_FLAG_SET_SINH	BIT(6)
> +#define SBI_PMU_CFG_FLAG_SET_MINH	BIT(7)
>  
>  /* Flags defined for counter start function */
> -#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0)
> +#define SBI_PMU_START_FLAG_SET_INIT_VALUE BIT(0)
>  
>  /* Flags defined for counter stop function */
> -#define SBI_PMU_STOP_FLAG_RESET (1 << 0)
> +#define SBI_PMU_STOP_FLAG_RESET BIT(0)
>  
>  enum sbi_ext_dbcn_fid {
>  	SBI_EXT_DBCN_CONSOLE_WRITE = 0,
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index babf1b9a4dbe..a83ae82301e3 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -386,7 +386,7 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
>  			cmask = 1;
>  		} else if (event->attr.config == PERF_COUNT_HW_INSTRUCTIONS) {
>  			cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
> -			cmask = 1UL << (CSR_INSTRET - CSR_CYCLE);
> +			cmask = BIT(CSR_INSTRET - CSR_CYCLE);
>  		}
>  	}
>  
> -- 
> 2.34.1
>

Other than the commit message,

Reviewed-by: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>

Thanks,
drew




[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux