[syzbot] [virtualization?] upstream boot error: WARNING: refcount bug in __free_pages_ok

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

syzbot found the following issue on:

HEAD commit:    b3603fcb79b1 Merge tag 'dlm-6.9' of git://git.kernel.org/p..
git tree:       upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=10f04c81180000
kernel config:  https://syzkaller.appspot.com/x/.config?x=fcb5bfbee0a42b54
dashboard link: https://syzkaller.appspot.com/bug?extid=70f57d8a3ae84934c003
compiler:       Debian clang version 15.0.6, GNU ld (GNU Binutils for Debian) 2.40

Downloadable assets:
disk image: https://storage.googleapis.com/syzbot-assets/43969dffd4a6/disk-b3603fcb.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/ef48ab3b378b/vmlinux-b3603fcb.xz
kernel image: https://storage.googleapis.com/syzbot-assets/728f5ff2b6fe/bzImage-b3603fcb.xz

IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+70f57d8a3ae84934c003@xxxxxxxxxxxxxxxxxxxxxxxxx

Key type pkcs7_test registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: button: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: button: Sleep Button [SLPF]
ioatdma: Intel(R) QuickData Technology Driver 5.00
ACPI: \_SB_.LNKC: Enabled at IRQ 11
virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
ACPI: \_SB_.LNKD: Enabled at IRQ 10
virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
ACPI: \_SB_.LNKB: Enabled at IRQ 10
virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
N_HDLC line discipline registered with maxframe=4096
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ACPI: bus type drm_connector registered
[drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
Console: switching to colour frame buffer device 128x48
platform vkms: [drm] fb0: vkmsdrmfb frame buffer device
usbcore: registered new interface driver udl
brd: module loaded
loop: module loaded
zram: Added device: zram0
null_blk: disk nullb0 created
null_blk: module loaded
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=118)
Initialized host personality
usbcore: registered new interface driver rtsx_usb
usbcore: registered new interface driver viperboard
usbcore: registered new interface driver dln2
usbcore: registered new interface driver pn533_usb
nfcsim 0.2 initialized
usbcore: registered new interface driver port100
usbcore: registered new interface driver nfcmrvl
Loading iSCSI transport class v2.0-870.
virtio_scsi virtio0: 1/0/0 default/read/poll queues
------------[ cut here ]------------
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 1 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.8.0-syzkaller-11567-gb3603fcb79b1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
Code: b2 00 00 00 e8 57 d4 f2 fc 5b 5d c3 cc cc cc cc e8 4b d4 f2 fc c6 05 0c f9 ef 0a 01 90 48 c7 c7 a0 5d 1e 8c e8 b7 75 b5 fc 90 <0f> 0b 90 90 eb d9 e8 2b d4 f2 fc c6 05 e9 f8 ef 0a 01 90 48 c7 c7
RSP: 0000:ffffc90000066e18 EFLAGS: 00010246
RAX: 76f86e452fcad900 RBX: ffff8880210d2aec RCX: ffff888016ac8000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000004 R08: ffffffff8157ffe2 R09: fffffbfff1c396e0
R10: dffffc0000000000 R11: fffffbfff1c396e0 R12: ffffea000502cdc0
R13: ffffea000502cdc8 R14: 1ffffd4000a059b9 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88823ffff000 CR3: 000000000e132000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 reset_page_owner include/linux/page_owner.h:25 [inline]
 free_pages_prepare mm/page_alloc.c:1141 [inline]
 __free_pages_ok+0xc54/0xd80 mm/page_alloc.c:1270
 make_alloc_exact+0xa3/0xf0 mm/page_alloc.c:4829
 vring_alloc_queue drivers/virtio/virtio_ring.c:319 [inline]
 vring_alloc_queue_split+0x20a/0x600 drivers/virtio/virtio_ring.c:1108
 vring_create_virtqueue_split+0xc6/0x310 drivers/virtio/virtio_ring.c:1158
 vring_create_virtqueue+0xca/0x110 drivers/virtio/virtio_ring.c:2683
 setup_vq+0xe9/0x2d0 drivers/virtio/virtio_pci_legacy.c:131
 vp_setup_vq+0xbf/0x330 drivers/virtio/virtio_pci_common.c:189
 vp_find_vqs_msix+0x8b2/0xc80 drivers/virtio/virtio_pci_common.c:331
 vp_find_vqs+0x4c/0x4e0 drivers/virtio/virtio_pci_common.c:408
 virtio_find_vqs include/linux/virtio_config.h:233 [inline]
 virtscsi_init+0x8db/0xd00 drivers/scsi/virtio_scsi.c:887
 virtscsi_probe+0x3ea/0xf60 drivers/scsi/virtio_scsi.c:945
 virtio_dev_probe+0x991/0xaf0 drivers/virtio/virtio.c:311
 really_probe+0x29e/0xc50 drivers/base/dd.c:658
 __driver_probe_device+0x1a2/0x3e0 drivers/base/dd.c:800
 driver_probe_device+0x50/0x430 drivers/base/dd.c:830
 __driver_attach+0x45f/0x710 drivers/base/dd.c:1216
 bus_for_each_dev+0x239/0x2b0 drivers/base/bus.c:368
 bus_add_driver+0x347/0x620 drivers/base/bus.c:673
 driver_register+0x23a/0x320 drivers/base/driver.c:246
 virtio_scsi_init+0x65/0xe0 drivers/scsi/virtio_scsi.c:1083
 do_one_initcall+0x248/0x880 init/main.c:1238
 do_initcall_level+0x157/0x210 init/main.c:1300
 do_initcalls+0x3f/0x80 init/main.c:1316
 kernel_init_freeable+0x435/0x5d0 init/main.c:1548
 kernel_init+0x1d/0x2b0 init/main.c:1437
 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
 </TASK>


---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@xxxxxxxxxxxxxxxx.

syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.

If the report is already addressed, let syzbot know by replying with:
#syz fix: exact-commit-title

If you want to overwrite report's subsystems, reply with:
#syz set subsystems: new-subsystem
(See the list of subsystem names on the web dashboard)

If the report is a duplicate of another one, reply with:
#syz dup: exact-subject-of-another-report

If you want to undo deduplication, reply with:
#syz undup




[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux