On 3/19/24 16:10, Michael S. Tsirkin wrote:
On Tue, Mar 19, 2024 at 02:09:34AM -0400, Michael S. Tsirkin wrote:
On Tue, Mar 19, 2024 at 02:59:23PM +1000, Gavin Shan wrote:
On 3/19/24 02:59, Will Deacon wrote:
[...]
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 49299b1f9ec7..7d852811c912 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -687,9 +687,15 @@ static inline int virtqueue_add_split(struct virtqueue *_vq,
avail = vq->split.avail_idx_shadow & (vq->split.vring.num - 1);
vq->split.vring.avail->ring[avail] = cpu_to_virtio16(_vq->vdev, head);
- /* Descriptors and available array need to be set before we expose the
- * new available array entries. */
- virtio_wmb(vq->weak_barriers);
+ /*
+ * Descriptors and available array need to be set before we expose
+ * the new available array entries. virtio_wmb() should be enough
+ * to ensuere the order theoretically. However, a stronger barrier
+ * is needed by ARM64. Otherwise, the stale data can be observed
+ * by the host (vhost). A stronger barrier should work for other
+ * architectures, but performance loss is expected.
+ */
+ virtio_mb(false);
vq->split.avail_idx_shadow++;
vq->split.vring.avail->idx = cpu_to_virtio16(_vq->vdev,
vq->split.avail_idx_shadow);
Replacing a DMB with a DSB is _very_ unlikely to be the correct solution
here, especially when ordering accesses to coherent memory.
In practice, either the larger timing different from the DSB or the fact
that you're going from a Store->Store barrier to a full barrier is what
makes things "work" for you. Have you tried, for example, a DMB SY
(e.g. via __smb_mb()).
We definitely shouldn't take changes like this without a proper
explanation of what is going on.
Thanks for your comments, Will.
Yes, DMB should work for us. However, it seems this instruction has issues on
NVidia's grace-hopper. It's hard for me to understand how DMB and DSB works
from hardware level. I agree it's not the solution to replace DMB with DSB
before we fully understand the root cause.
I tried the possible replacement like below. __smp_mb() can avoid the issue like
__mb() does. __ndelay(10) can avoid the issue, but __ndelay(9) doesn't.
static inline int virtqueue_add_split(struct virtqueue *_vq, ...)
{
:
/* Put entry in available array (but don't update avail->idx until they
* do sync). */
avail = vq->split.avail_idx_shadow & (vq->split.vring.num - 1);
vq->split.vring.avail->ring[avail] = cpu_to_virtio16(_vq->vdev, head);
/* Descriptors and available array need to be set before we expose the
* new available array entries. */
// Broken: virtio_wmb(vq->weak_barriers);
// Broken: __dma_mb();
// Work: __mb();
// Work: __smp_mb();
Did you try __smp_wmb ? And wmb?
virtio_wmb(false) is equivalent to __smb_wmb(), which is broken.
__wmb() works either. No issue found with it.
// Work: __ndelay(100);
// Work: __ndelay(10);
// Broken: __ndelay(9);
vq->split.avail_idx_shadow++;
vq->split.vring.avail->idx = cpu_to_virtio16(_vq->vdev,
vq->split.avail_idx_shadow);
What if you stick __ndelay here?
And keep virtio_wmb above?
The result has been shared through a separate reply.
vq->num_added++;
pr_debug("Added buffer head %i to %p\n", head, vq);
END_USE(vq);
:
}
I also tried to measure the consumed time for various barrier-relative instructions using
ktime_get_ns() which should have consumed most of the time. __smb_mb() is slower than
__smp_wmb() but faster than __mb()
Instruction Range of used time in ns
----------------------------------------------
__smp_wmb() [32 1128032]
__smp_mb() [32 1160096]
__mb() [32 1162496]
Thanks,
Gavin
