On Wed, Jan 10, 2024 at 9:40 PM Steve Sistare <steven.sistare@xxxxxxxxxx> wrote:
>
> When device ownership is passed to a new process via VHOST_NEW_OWNER,
> some devices need to know the new userland addresses of the dma mappings.
> Define the new iotlb message type VHOST_IOTLB_REMAP to update the uaddr
> of a mapping. The new uaddr must address the same memory object as
> originally mapped.
>
I think this new ioctl is very interesting, and can be used to
optimize some parts of live migration with shadow virtqueue if it
allows to actually replace the uaddr. Would you be interested in that
capability?
> The user must suspend the device before the old address is invalidated,
> and cannot resume it until after VHOST_IOTLB_REMAP is called, but this
> requirement is not enforced by the API.
>
> Signed-off-by: Steve Sistare <steven.sistare@xxxxxxxxxx>
> ---
> drivers/vhost/vdpa.c | 34 ++++++++++++++++++++++++++++++++
> include/uapi/linux/vhost_types.h | 11 ++++++++++-
> 2 files changed, 44 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c
> index faed6471934a..ec5ca20bd47d 100644
> --- a/drivers/vhost/vdpa.c
> +++ b/drivers/vhost/vdpa.c
> @@ -1219,6 +1219,37 @@ static int vhost_vdpa_pa_map(struct vhost_vdpa *v,
>
> }
>
> +static int vhost_vdpa_process_iotlb_remap(struct vhost_vdpa *v,
> + struct vhost_iotlb *iotlb,
> + struct vhost_iotlb_msg *msg)
> +{
> + struct vdpa_device *vdpa = v->vdpa;
> + const struct vdpa_config_ops *ops = vdpa->config;
> + u32 asid = iotlb_to_asid(iotlb);
> + u64 start = msg->iova;
> + u64 last = start + msg->size - 1;
> + struct vhost_iotlb_map *map;
> + int r = 0;
> +
> + if (msg->perm || !msg->size)
> + return -EINVAL;
> +
> + map = vhost_iotlb_itree_first(iotlb, start, last);
> + if (!map)
> + return -ENOENT;
> +
> + if (map->start != start || map->last != last)
> + return -EINVAL;
> +
> + /* batch will finish with remap. non-batch must do it now. */
> + if (!v->in_batch)
> + r = ops->set_map(vdpa, asid, iotlb);
I'm missing how these cases are handled:
* The device does not expose set_map but dma_map / dma_unmap (you can
check this case with the simulator)
* The device uses platform iommu (!set_map && !dma_unmap vdpa_ops).
> + if (!r)
> + map->addr = msg->uaddr;
> +
> + return r;
> +}
> +
> static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v,
> struct vhost_iotlb *iotlb,
> struct vhost_iotlb_msg *msg)
> @@ -1298,6 +1329,9 @@ static int vhost_vdpa_process_iotlb_msg(struct vhost_dev *dev, u32 asid,
> ops->set_map(vdpa, asid, iotlb);
> v->in_batch = false;
> break;
> + case VHOST_IOTLB_REMAP:
> + r = vhost_vdpa_process_iotlb_remap(v, iotlb, msg);
> + break;
> default:
> r = -EINVAL;
> break;
> diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h
> index 9177843951e9..35908315ff55 100644
> --- a/include/uapi/linux/vhost_types.h
> +++ b/include/uapi/linux/vhost_types.h
> @@ -79,7 +79,7 @@ struct vhost_iotlb_msg {
> /*
> * VHOST_IOTLB_BATCH_BEGIN and VHOST_IOTLB_BATCH_END allow modifying
> * multiple mappings in one go: beginning with
> - * VHOST_IOTLB_BATCH_BEGIN, followed by any number of
> + * VHOST_IOTLB_BATCH_BEGIN, followed by any number of VHOST_IOTLB_REMAP or
> * VHOST_IOTLB_UPDATE messages, and ending with VHOST_IOTLB_BATCH_END.
> * When one of these two values is used as the message type, the rest
> * of the fields in the message are ignored. There's no guarantee that
> @@ -87,6 +87,15 @@ struct vhost_iotlb_msg {
> */
> #define VHOST_IOTLB_BATCH_BEGIN 5
> #define VHOST_IOTLB_BATCH_END 6
> +
> +/*
> + * VHOST_IOTLB_REMAP registers a new uaddr for the existing mapping at iova.
> + * The new uaddr must address the same memory object as originally mapped.
> + * Failure to do so will result in user memory corruption and/or device
> + * misbehavior. iova and size must match the arguments used to create the
> + * an existing mapping. Protection is not changed, and perm must be 0.
> + */
> +#define VHOST_IOTLB_REMAP 7
> __u8 type;
> };
>
> --
> 2.39.3
>
