On Mon, 2023-12-25 at 09:41 -0500, Michael S. Tsirkin wrote: > On Tue, Dec 19, 2023 at 08:08:43PM +0200, Dragos Tatulea wrote: > > Add support for resumable vqs in the mlx5_vdpa driver. This is a > > firmware feature that can be used for the following benefits: > > - Full device .suspend/.resume. > > - .set_map doesn't need to destroy and create new vqs anymore just to > > update the map. When resumable vqs are supported it is enough to > > suspend the vqs, set the new maps, and then resume the vqs. > > > > The first patch exposes relevant bits for the feature in mlx5_ifc.h. > > That means it needs to be applied to the mlx5-vhost tree [0] first. Once > > applied there, the change has to be pulled from mlx5-vhost into the > > vhost tree and only then the remaining patches can be applied. Same flow > > as the vq descriptor mappings patchset [1]. > > > > The second part implements the vdpa backend feature support to allow > > vq state and address changes when the device is in DRIVER_OK state and > > suspended. > > > > The third part adds support for seletively modifying vq parameters. This > > is needed to be able to use resumable vqs. > > > > Then the actual support for resumable vqs is added. > > > > The last part of the series introduces reference counting for mrs which > > is necessary to avoid freeing mkeys too early or leaking them. > > > I lost track. Are you going to send v5 or not? > I was waiting for your answer if I should send it or not. I suppose this means yes. I will send it in a few minutes. > > * Changes in v4: > > - Added vdpa backend feature support for changing vq properties in > > DRIVER_OK when device is suspended. Added support in the driver as > > well. > > - Dropped Acked-by for the patches that had the tag mistakenly > > added. > > > > * Changes in v3: > > - Faulty version. Please ignore. > > > > * Changes in v2: > > - Added mr refcounting patches. > > - Deleted unnecessary patch: "vdpa/mlx5: Split function into locked and > > unlocked variants" > > - Small print improvement in "Introduce per vq and device resume" > > patch. > > - Patch 1/7 has been applied to mlx5-vhost branch. > > > > > > Dragos Tatulea (15): > > vdpa: Add VHOST_BACKEND_F_CHANGEABLE_VQ_ADDR_IN_SUSPEND flag > > vdpa: Add VHOST_BACKEND_F_CHANGEABLE_VQ_STATE_IN_SUSPEND flag > > vdpa: Accept VHOST_BACKEND_F_CHANGEABLE_VQ_ADDR_IN_SUSPEND backend > > feature > > vdpa: Accept VHOST_BACKEND_F_CHANGEABLE_VQ_STATE_IN_SUSPEND backend > > feature > > vdpa: Track device suspended state > > vdpa: Block vq address change in DRIVER_OK unless device supports it > > vdpa: Block vq state change in DRIVER_OK unless device supports it > > vdpa/mlx5: Expose resumable vq capability > > vdpa/mlx5: Allow modifying multiple vq fields in one modify command > > vdpa/mlx5: Introduce per vq and device resume > > vdpa/mlx5: Mark vq addrs for modification in hw vq > > vdpa/mlx5: Mark vq state for modification in hw vq > > vdpa/mlx5: Use vq suspend/resume during .set_map > > vdpa/mlx5: Introduce reference counting to mrs > > vdpa/mlx5: Add mkey leak detection > > > > drivers/vdpa/mlx5/core/mlx5_vdpa.h | 10 +- > > drivers/vdpa/mlx5/core/mr.c | 69 +++++++-- > > drivers/vdpa/mlx5/net/mlx5_vnet.c | 218 ++++++++++++++++++++++++++--- > > drivers/vhost/vdpa.c | 51 ++++++- > > include/linux/mlx5/mlx5_ifc.h | 3 +- > > include/linux/mlx5/mlx5_ifc_vdpa.h | 4 + > > include/uapi/linux/vhost_types.h | 8 ++ > > 7 files changed, 322 insertions(+), 41 deletions(-) > > > > -- > > 2.43.0 >