On Wed, Oct 25, 2023 at 04:00:43PM +0300, Yishai Hadas wrote:
> On 25/10/2023 13:17, Michael S. Tsirkin wrote:
> > On Wed, Oct 25, 2023 at 12:18:32PM +0300, Yishai Hadas wrote:
> > > On 25/10/2023 0:01, Michael S. Tsirkin wrote:
> > >
> > > On Tue, Oct 17, 2023 at 04:42:14PM +0300, Yishai Hadas wrote:
> > >
> > > Introduce APIs to execute legacy IO admin commands.
> > >
> > > It includes: list_query/use, io_legacy_read/write,
> > > io_legacy_notify_info.
> > >
> > > Those APIs will be used by the next patches from this series.
> > >
> > > Signed-off-by: Yishai Hadas <yishaih@xxxxxxxxxx>
> > > ---
> > > drivers/virtio/virtio_pci_common.c | 11 ++
> > > drivers/virtio/virtio_pci_common.h | 2 +
> > > drivers/virtio/virtio_pci_modern.c | 206 +++++++++++++++++++++++++++++
> > > include/linux/virtio_pci_admin.h | 18 +++
> > > 4 files changed, 237 insertions(+)
> > > create mode 100644 include/linux/virtio_pci_admin.h
> > >
> > > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> > > index 6b4766d5abe6..212d68401d2c 100644
> > > --- a/drivers/virtio/virtio_pci_common.c
> > > +++ b/drivers/virtio/virtio_pci_common.c
> > > @@ -645,6 +645,17 @@ static struct pci_driver virtio_pci_driver = {
> > > .sriov_configure = virtio_pci_sriov_configure,
> > > };
> > >
> > > +struct virtio_device *virtio_pci_vf_get_pf_dev(struct pci_dev *pdev)
> > > +{
> > > + struct virtio_pci_device *pf_vp_dev;
> > > +
> > > + pf_vp_dev = pci_iov_get_pf_drvdata(pdev, &virtio_pci_driver);
> > > + if (IS_ERR(pf_vp_dev))
> > > + return NULL;
> > > +
> > > + return &pf_vp_dev->vdev;
> > > +}
> > > +
> > > module_pci_driver(virtio_pci_driver);
> > >
> > > MODULE_AUTHOR("Anthony Liguori <aliguori@xxxxxxxxxx>");
> > > diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h
> > > index a21b9ba01a60..2785e61ed668 100644
> > > --- a/drivers/virtio/virtio_pci_common.h
> > > +++ b/drivers/virtio/virtio_pci_common.h
> > > @@ -155,4 +155,6 @@ static inline void virtio_pci_legacy_remove(struct virtio_pci_device *vp_dev)
> > > int virtio_pci_modern_probe(struct virtio_pci_device *);
> > > void virtio_pci_modern_remove(struct virtio_pci_device *);
> > >
> > > +struct virtio_device *virtio_pci_vf_get_pf_dev(struct pci_dev *pdev);
> > > +
> > > #endif
> > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> > > index cc159a8e6c70..00b65e20b2f5 100644
> > > --- a/drivers/virtio/virtio_pci_modern.c
> > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > @@ -719,6 +719,212 @@ static void vp_modern_destroy_avq(struct virtio_device *vdev)
> > > vp_dev->del_vq(&vp_dev->admin_vq.info);
> > > }
> > >
> > > +/*
> > > + * virtio_pci_admin_list_query - Provides to driver list of commands
> > > + * supported for the PCI VF.
> > > + * @dev: VF pci_dev
> > > + * @buf: buffer to hold the returned list
> > > + * @buf_size: size of the given buffer
> > > + *
> > > + * Returns 0 on success, or negative on failure.
> > > + */
> > > +int virtio_pci_admin_list_query(struct pci_dev *pdev, u8 *buf, int buf_size)
> > > +{
> > > + struct virtio_device *virtio_dev = virtio_pci_vf_get_pf_dev(pdev);
> > > + struct virtio_admin_cmd cmd = {};
> > > + struct scatterlist result_sg;
> > > +
> > > + if (!virtio_dev)
> > > + return -ENODEV;
> > > +
> > > + sg_init_one(&result_sg, buf, buf_size);
> > > + cmd.opcode = cpu_to_le16(VIRTIO_ADMIN_CMD_LIST_QUERY);
> > > + cmd.group_type = cpu_to_le16(VIRTIO_ADMIN_GROUP_TYPE_SRIOV);
> > > + cmd.result_sg = &result_sg;
> > > +
> > > + return vp_modern_admin_cmd_exec(virtio_dev, &cmd);
> > > +}
> > > +EXPORT_SYMBOL_GPL(virtio_pci_admin_list_query);
> > > +
> > > +/*
> > > + * virtio_pci_admin_list_use - Provides to device list of commands
> > > + * used for the PCI VF.
> > > + * @dev: VF pci_dev
> > > + * @buf: buffer which holds the list
> > > + * @buf_size: size of the given buffer
> > > + *
> > > + * Returns 0 on success, or negative on failure.
> > > + */
> > > +int virtio_pci_admin_list_use(struct pci_dev *pdev, u8 *buf, int buf_size)
> > > +{
> > > + struct virtio_device *virtio_dev = virtio_pci_vf_get_pf_dev(pdev);
> > > + struct virtio_admin_cmd cmd = {};
> > > + struct scatterlist data_sg;
> > > +
> > > + if (!virtio_dev)
> > > + return -ENODEV;
> > > +
> > > + sg_init_one(&data_sg, buf, buf_size);
> > > + cmd.opcode = cpu_to_le16(VIRTIO_ADMIN_CMD_LIST_USE);
> > > + cmd.group_type = cpu_to_le16(VIRTIO_ADMIN_GROUP_TYPE_SRIOV);
> > > + cmd.data_sg = &data_sg;
> > > +
> > > + return vp_modern_admin_cmd_exec(virtio_dev, &cmd);
> > > +}
> > > +EXPORT_SYMBOL_GPL(virtio_pci_admin_list_use);
> > >
> > > list commands are actually for a group, not for the VF.
> > >
> > > The VF was given to let the function gets the PF from it.
> > >
> > > For now, the only existing 'group_type' in the spec is SRIOV, this is why we
> > > hard-coded it internally to match the VF PCI.
> > >
> > > Alternatively,
> > > We can change the API to get the PF and 'group_type' from the caller to better
> > > match future usage.
> > > However, this will require to export the virtio_pci_vf_get_pf_dev() API outside
> > > virtio-pci.
> > >
> > > Do you prefer to change to the latter option ?
> > No, there are several points I wanted to make but this
> > was not one of them.
> >
> > First, for query, I was trying to suggest changing the comment.
> > Something like:
> > + * virtio_pci_admin_list_query - Provides to driver list of commands
> > + * supported for the group including the given member device.
> > + * @dev: member pci device.
>
> Following your suggestion below, to issue inside virtio the query/use and
> keep its data internally (i.e. on the 'admin_queue' context).
>
> We may suggest the below API for the upper-layers (e.g. vfio) to be
> exported.
>
> bool virtio_pci_admin_supported_cmds(struct pci_dev *pdev, u64 cmds)
>
> It will find the PF from the VF and internally will check on the
> 'admin_queue' context whether the given 'cmds' input is supported.
>
> Its output will be true/false.
>
> Makes sense ?
>
> >
> >
> >
> > Second, I don't think using buf/size like this is necessary.
> > For now we have a small number of commands just work with u64.
> OK, just keep in mind that upon issuing the command towards the controller
> this still needs to be an allocated u64 data on the heap to work properly.
> >
> >
> > Third, while list could be an OK API, the use API does not
> > really work. If you call use with one set of parameters for
> > one VF and another for another then they conflict do they not?
> >
> > So you need virtio core to do the list/use dance for you,
> > save the list of commands on the PF (which again is just u64 for now)
> > and vfio or vdpa or whatnot will just query that.
> > I hope I'm being clear.
>
> In that case the virtio_pci_admin_list_query() and
> virtio_pci_admin_list_use() won't be exported any more and will be static in
> virtio-pci.
>
> They will be called internally as part of activating the admin_queue and
> will simply get struct virtio_device* (the PF) instead of struct pci_dev
> *pdev.
Yes - I think some kind of API will be needed to setup/cleanup.
Then 1st call to setup would do the list/use dance? some ref counting?
And maybe the API should just be
bool virtio_pci_admin_has_legacy_io()
> >
> >
> > >
> > >
> > > +
> > > +/*
> > > + * virtio_pci_admin_legacy_io_write - Write legacy registers of a member device
> > > + * @dev: VF pci_dev
> > > + * @opcode: op code of the io write command
> > >
> > > opcode is actually either VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE
> > > or VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE correct?
> > >
> > > So please just add 2 APIs for this so users don't need to care.
> > > Could be wrappers around these two things.
> > >
> > >
> > > OK.
> > >
> > > We'll export the below 2 APIs [1] which internally will call
> > > virtio_pci_admin_legacy_io_write() with the proper op code hard-coded.
> > >
> > > [1]virtio_pci_admin_legacy_device_io_write()
> > > virtio_pci_admin_legacy_common_io_write()
> > >
> > > Yishai
> > >
> > Makes sense.
>
> OK, we may do the same split for the 'legacy_io_read' commands to be
> symmetric with the 'legacy_io_write', right ?
>
> Yishai
makes sense.
> > >
> > > + * @offset: starting byte offset within the registers to write to
> > > + * @size: size of the data to write
> > > + * @buf: buffer which holds the data
> > > + *
> > > + * Returns 0 on success, or negative on failure.
> > > + */
> > > +int virtio_pci_admin_legacy_io_write(struct pci_dev *pdev, u16 opcode,
> > > + u8 offset, u8 size, u8 *buf)
> > > +{
> > > + struct virtio_device *virtio_dev = virtio_pci_vf_get_pf_dev(pdev);
> > > + struct virtio_admin_cmd_legacy_wr_data *data;
> > > + struct virtio_admin_cmd cmd = {};
> > > + struct scatterlist data_sg;
> > > + int vf_id;
> > > + int ret;
> > > +
> > > + if (!virtio_dev)
> > > + return -ENODEV;
> > > +
> > > + vf_id = pci_iov_vf_id(pdev);
> > > + if (vf_id < 0)
> > > + return vf_id;
> > > +
> > > + data = kzalloc(sizeof(*data) + size, GFP_KERNEL);
> > > + if (!data)
> > > + return -ENOMEM;
> > > +
> > > + data->offset = offset;
> > > + memcpy(data->registers, buf, size);
> > > + sg_init_one(&data_sg, data, sizeof(*data) + size);
> > > + cmd.opcode = cpu_to_le16(opcode);
> > > + cmd.group_type = cpu_to_le16(VIRTIO_ADMIN_GROUP_TYPE_SRIOV);
> > > + cmd.group_member_id = cpu_to_le64(vf_id + 1);
> > > + cmd.data_sg = &data_sg;
> > > + ret = vp_modern_admin_cmd_exec(virtio_dev, &cmd);
> > > +
> > > + kfree(data);
> > > + return ret;
> > > +}
> > > +EXPORT_SYMBOL_GPL(virtio_pci_admin_legacy_io_write);
> > > +
> > > +/*
> > > + * virtio_pci_admin_legacy_io_read - Read legacy registers of a member device
> > > + * @dev: VF pci_dev
> > > + * @opcode: op code of the io read command
> > > + * @offset: starting byte offset within the registers to read from
> > > + * @size: size of the data to be read
> > > + * @buf: buffer to hold the returned data
> > > + *
> > > + * Returns 0 on success, or negative on failure.
> > > + */
> > > +int virtio_pci_admin_legacy_io_read(struct pci_dev *pdev, u16 opcode,
> > > + u8 offset, u8 size, u8 *buf)
> > > +{
> > > + struct virtio_device *virtio_dev = virtio_pci_vf_get_pf_dev(pdev);
> > > + struct virtio_admin_cmd_legacy_rd_data *data;
> > > + struct scatterlist data_sg, result_sg;
> > > + struct virtio_admin_cmd cmd = {};
> > > + int vf_id;
> > > + int ret;
> > > +
> > > + if (!virtio_dev)
> > > + return -ENODEV;
> > > +
> > > + vf_id = pci_iov_vf_id(pdev);
> > > + if (vf_id < 0)
> > > + return vf_id;
> > > +
> > > + data = kzalloc(sizeof(*data), GFP_KERNEL);
> > > + if (!data)
> > > + return -ENOMEM;
> > > +
> > > + data->offset = offset;
> > > + sg_init_one(&data_sg, data, sizeof(*data));
> > > + sg_init_one(&result_sg, buf, size);
> > > + cmd.opcode = cpu_to_le16(opcode);
> > > + cmd.group_type = cpu_to_le16(VIRTIO_ADMIN_GROUP_TYPE_SRIOV);
> > > + cmd.group_member_id = cpu_to_le64(vf_id + 1);
> > > + cmd.data_sg = &data_sg;
> > > + cmd.result_sg = &result_sg;
> > > + ret = vp_modern_admin_cmd_exec(virtio_dev, &cmd);
> > > +
> > > + kfree(data);
> > > + return ret;
> > > +}
> > > +EXPORT_SYMBOL_GPL(virtio_pci_admin_legacy_io_read);
> > > +
> > > +/*
> > > + * virtio_pci_admin_legacy_io_notify_info - Read the queue notification
> > > + * information for legacy interface
> > > + * @dev: VF pci_dev
> > > + * @req_bar_flags: requested bar flags
> > > + * @bar: on output the BAR number of the member device
> > > + * @bar_offset: on output the offset within bar
> > > + *
> > > + * Returns 0 on success, or negative on failure.
> > > + */
> > > +int virtio_pci_admin_legacy_io_notify_info(struct pci_dev *pdev,
> > > + u8 req_bar_flags, u8 *bar,
> > > + u64 *bar_offset)
> > > +{
> > > + struct virtio_device *virtio_dev = virtio_pci_vf_get_pf_dev(pdev);
> > > + struct virtio_admin_cmd_notify_info_result *result;
> > > + struct virtio_admin_cmd cmd = {};
> > > + struct scatterlist result_sg;
> > > + int vf_id;
> > > + int ret;
> > > +
> > > + if (!virtio_dev)
> > > + return -ENODEV;
> > > +
> > > + vf_id = pci_iov_vf_id(pdev);
> > > + if (vf_id < 0)
> > > + return vf_id;
> > > +
> > > + result = kzalloc(sizeof(*result), GFP_KERNEL);
> > > + if (!result)
> > > + return -ENOMEM;
> > > +
> > > + sg_init_one(&result_sg, result, sizeof(*result));
> > > + cmd.opcode = cpu_to_le16(VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_INFO);
> > > + cmd.group_type = cpu_to_le16(VIRTIO_ADMIN_GROUP_TYPE_SRIOV);
> > > + cmd.group_member_id = cpu_to_le64(vf_id + 1);
> > > + cmd.result_sg = &result_sg;
> > > + ret = vp_modern_admin_cmd_exec(virtio_dev, &cmd);
> > > + if (!ret) {
> > > + struct virtio_admin_cmd_notify_info_data *entry;
> > > + int i;
> > > +
> > > + ret = -ENOENT;
> > > + for (i = 0; i < VIRTIO_ADMIN_CMD_MAX_NOTIFY_INFO; i++) {
> > > + entry = &result->entries[i];
> > > + if (entry->flags == VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_END)
> > > + break;
> > > + if (entry->flags != req_bar_flags)
> > > + continue;
> > > + *bar = entry->bar;
> > > + *bar_offset = le64_to_cpu(entry->offset);
> > > + ret = 0;
> > > + break;
> > > + }
> > > + }
> > > +
> > > + kfree(result);
> > > + return ret;
> > > +}
> > > +EXPORT_SYMBOL_GPL(virtio_pci_admin_legacy_io_notify_info);
> > > +
> > > static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
> > > .get = NULL,
> > > .set = NULL,
> > > diff --git a/include/linux/virtio_pci_admin.h b/include/linux/virtio_pci_admin.h
> > > new file mode 100644
> > > index 000000000000..cb916a4bc1b1
> > > --- /dev/null
> > > +++ b/include/linux/virtio_pci_admin.h
> > > @@ -0,0 +1,18 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +#ifndef _LINUX_VIRTIO_PCI_ADMIN_H
> > > +#define _LINUX_VIRTIO_PCI_ADMIN_H
> > > +
> > > +#include <linux/types.h>
> > > +#include <linux/pci.h>
> > > +
> > > +int virtio_pci_admin_list_use(struct pci_dev *pdev, u8 *buf, int buf_size);
> > > +int virtio_pci_admin_list_query(struct pci_dev *pdev, u8 *buf, int buf_size);
> > > +int virtio_pci_admin_legacy_io_write(struct pci_dev *pdev, u16 opcode,
> > > + u8 offset, u8 size, u8 *buf);
> > > +int virtio_pci_admin_legacy_io_read(struct pci_dev *pdev, u16 opcode,
> > > + u8 offset, u8 size, u8 *buf);
> > > +int virtio_pci_admin_legacy_io_notify_info(struct pci_dev *pdev,
> > > + u8 req_bar_flags, u8 *bar,
> > > + u64 *bar_offset);
> > > +
> > > +#endif /* _LINUX_VIRTIO_PCI_ADMIN_H */
> > > --
> > > 2.27.0
> > >
> > >
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
