> From: Michael S. Tsirkin <mst@xxxxxxxxxx> > Sent: Thursday, October 12, 2023 4:23 PM > > On Tue, Sep 26, 2023 at 03:45:36AM +0000, Parav Pandit wrote: > > > > > > > From: Michael S. Tsirkin <mst@xxxxxxxxxx> > > > Sent: Tuesday, September 26, 2023 12:06 AM > > > > > One can thinkably do that wait in hardware, though. Just defer > > > completion until read is done. > > > > > Once OASIS does such new interface and if some hw vendor _actually_ wants > to do such complex hw, may be vfio driver can adopt to it. > > The reset behaviour I describe is already in the spec. What else do you want > OASIS to standardize? Virtio currently is just a register map it does not yet > include suggestions on how exactly do pci express transactions look. You feel we > should add that? The reset behavior in the spec for modern as listed in [1] and [2] is just fine. What I meant is in context of having MMIO based legacy registers to "defer completion until read is done". I think you meant, "Just differ read completion, until reset is done". This means the hw needs to finish the device reset for thousands of devices within the read completion timeout of the pci. So when if OASIS does such standardization, someone can implement it. What I recollect, is OASIS didn't not standardize such anti-scale approach and took the admin command approach which achieve better scale. Hope I clarified. I am not expecting OASIS to do anything extra for legacy registers. [1] The device MUST reset when 0 is written to device_status, and present a 0 in device_status once that is done. [2] After writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. _______________________________________________ Virtualization mailing list Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/virtualization