Re: [PATCH net-next V1 0/4] virtio_net: add per queue interrupt coalescing support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 13 Jul 2023 07:40:12 -0400, "Michael S. Tsirkin" <mst@xxxxxxxxxx> wrote:
> On Mon, Jul 10, 2023 at 12:20:01PM +0300, Gavin Li wrote:
> > Currently, coalescing parameters are grouped for all transmit and receive
> > virtqueues. This patch series add support to set or get the parameters for
> > a specified virtqueue.
> >
> > When the traffic between virtqueues is unbalanced, for example, one virtqueue
> > is busy and another virtqueue is idle, then it will be very useful to
> > control coalescing parameters at the virtqueue granularity.
>
> series:
>
> Acked-by: Michael S. Tsirkin <mst@xxxxxxxxxx>


Why?

This series has the bug I reported.

Are you thinking that is ok? Or this is not a bug?

Thanks.



>
>
>
> > Example command:
> > $ ethtool -Q eth5 queue_mask 0x1 --coalesce tx-packets 10
> > Would set max_packets=10 to VQ 1.
> > $ ethtool -Q eth5 queue_mask 0x1 --coalesce rx-packets 10
> > Would set max_packets=10 to VQ 0.
> > $ ethtool -Q eth5 queue_mask 0x1 --show-coalesce
> >  Queue: 0
> >  Adaptive RX: off  TX: off
> >  stats-block-usecs: 0
> >  sample-interval: 0
> >  pkt-rate-low: 0
> >  pkt-rate-high: 0
> >
> >  rx-usecs: 222
> >  rx-frames: 0
> >  rx-usecs-irq: 0
> >  rx-frames-irq: 256
> >
> >  tx-usecs: 222
> >  tx-frames: 0
> >  tx-usecs-irq: 0
> >  tx-frames-irq: 256
> >
> >  rx-usecs-low: 0
> >  rx-frame-low: 0
> >  tx-usecs-low: 0
> >  tx-frame-low: 0
> >
> >  rx-usecs-high: 0
> >  rx-frame-high: 0
> >  tx-usecs-high: 0
> >  tx-frame-high: 0
> >
> > In this patch series:
> > Patch-1: Extract interrupt coalescing settings to a structure.
> > Patch-2: Extract get/set interrupt coalesce to a function.
> > Patch-3: Support per queue interrupt coalesce command.
> > Patch-4: Enable per queue interrupt coalesce feature.
> >
> > Gavin Li (4):
> >   virtio_net: extract interrupt coalescing settings to a structure
> >   virtio_net: extract get/set interrupt coalesce to a function
> >   virtio_net: support per queue interrupt coalesce command
> >   virtio_net: enable per queue interrupt coalesce feature
> >
> >  drivers/net/virtio_net.c        | 169 ++++++++++++++++++++++++++------
> >  include/uapi/linux/virtio_net.h |  14 +++
> >  2 files changed, 154 insertions(+), 29 deletions(-)
> >
> > --
> > 2.39.1
>
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux