Add new adminq definitions in support for vDPA operations.
Signed-off-by: Shannon Nelson <shannon.nelson@xxxxxxx>
---
include/linux/pds/pds_adminq.h | 266 +++++++++++++++++++++++++++++++++
1 file changed, 266 insertions(+)
diff --git a/include/linux/pds/pds_adminq.h b/include/linux/pds/pds_adminq.h
index 61b0a8634e1a..c66ead725434 100644
--- a/include/linux/pds/pds_adminq.h
+++ b/include/linux/pds/pds_adminq.h
@@ -605,6 +605,257 @@ struct pds_core_q_init_comp {
u8 color;
};
+/*
+ * enum pds_vdpa_cmd_opcode - vDPA Device commands
+ */
+enum pds_vdpa_cmd_opcode {
+ PDS_VDPA_CMD_INIT = 48,
+ PDS_VDPA_CMD_IDENT = 49,
+ PDS_VDPA_CMD_RESET = 51,
+ PDS_VDPA_CMD_VQ_RESET = 52,
+ PDS_VDPA_CMD_VQ_INIT = 53,
+ PDS_VDPA_CMD_STATUS_UPDATE = 54,
+ PDS_VDPA_CMD_SET_FEATURES = 55,
+ PDS_VDPA_CMD_SET_ATTR = 56,
+ PDS_VDPA_CMD_VQ_SET_STATE = 57,
+ PDS_VDPA_CMD_VQ_GET_STATE = 58,
+};
+
+/**
+ * struct pds_vdpa_cmd - generic command
+ * @opcode: Opcode
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ */
+struct pds_vdpa_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+};
+
+/**
+ * struct pds_vdpa_init_cmd - INIT command
+ * @opcode: Opcode PDS_VDPA_CMD_INIT
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ */
+struct pds_vdpa_init_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+};
+
+/**
+ * struct pds_vdpa_ident - vDPA identification data
+ * @hw_features: vDPA features supported by device
+ * @max_vqs: max queues available (2 queues for a single queuepair)
+ * @max_qlen: log(2) of maximum number of descriptors
+ * @min_qlen: log(2) of minimum number of descriptors
+ *
+ * This struct is used in a DMA block that is set up for the PDS_VDPA_CMD_IDENT
+ * transaction. Set up the DMA block and send the address in the IDENT cmd
+ * data, the DSC will write the ident information, then we can remove the DMA
+ * block after reading the answer. If the completion status is 0, then there
+ * is valid information, else there was an error and the data should be invalid.
+ */
+struct pds_vdpa_ident {
+ __le64 hw_features;
+ __le16 max_vqs;
+ __le16 max_qlen;
+ __le16 min_qlen;
+};
+
+/**
+ * struct pds_vdpa_ident_cmd - IDENT command
+ * @opcode: Opcode PDS_VDPA_CMD_IDENT
+ * @rsvd: Word boundary padding
+ * @vf_id: VF id
+ * @len: length of ident info DMA space
+ * @ident_pa: address for DMA of ident info (struct pds_vdpa_ident)
+ * only used for this transaction, then forgotten by DSC
+ */
+struct pds_vdpa_ident_cmd {
+ u8 opcode;
+ u8 rsvd;
+ __le16 vf_id;
+ __le32 len;
+ __le64 ident_pa;
+};
+
+/**
+ * struct pds_vdpa_status_cmd - STATUS_UPDATE command
+ * @opcode: Opcode PDS_VDPA_CMD_STATUS_UPDATE
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ * @status: new status bits
+ */
+struct pds_vdpa_status_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+ u8 status;
+};
+
+/**
+ * enum pds_vdpa_attr - List of VDPA device attributes
+ * @PDS_VDPA_ATTR_MAC: MAC address
+ * @PDS_VDPA_ATTR_MAX_VQ_PAIRS: Max virtqueue pairs
+ */
+enum pds_vdpa_attr {
+ PDS_VDPA_ATTR_MAC = 1,
+ PDS_VDPA_ATTR_MAX_VQ_PAIRS = 2,
+};
+
+/**
+ * struct pds_vdpa_setattr_cmd - SET_ATTR command
+ * @opcode: Opcode PDS_VDPA_CMD_SET_ATTR
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ * @attr: attribute to be changed (enum pds_vdpa_attr)
+ * @pad: Word boundary padding
+ * @mac: new mac address to be assigned as vdpa device address
+ * @max_vq_pairs: new limit of virtqueue pairs
+ */
+struct pds_vdpa_setattr_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+ u8 attr;
+ u8 pad[3];
+ union {
+ u8 mac[6];
+ __le16 max_vq_pairs;
+ } __packed;
+};
+
+/**
+ * struct pds_vdpa_vq_init_cmd - queue init command
+ * @opcode: Opcode PDS_VDPA_CMD_VQ_INIT
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ * @qid: Queue id (bit0 clear = rx, bit0 set = tx, qid=N is ctrlq)
+ * @len: log(2) of max descriptor count
+ * @desc_addr: DMA address of descriptor area
+ * @avail_addr: DMA address of available descriptors (aka driver area)
+ * @used_addr: DMA address of used descriptors (aka device area)
+ * @intr_index: interrupt index
+ */
+struct pds_vdpa_vq_init_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+ __le16 qid;
+ __le16 len;
+ __le64 desc_addr;
+ __le64 avail_addr;
+ __le64 used_addr;
+ __le16 intr_index;
+};
+
+/**
+ * struct pds_vdpa_vq_init_comp - queue init completion
+ * @status: Status of the command (enum pds_core_status_code)
+ * @hw_qtype: HW queue type, used in doorbell selection
+ * @hw_qindex: HW queue index, used in doorbell selection
+ * @rsvd: Word boundary padding
+ * @color: Color bit
+ */
+struct pds_vdpa_vq_init_comp {
+ u8 status;
+ u8 hw_qtype;
+ __le16 hw_qindex;
+ u8 rsvd[11];
+ u8 color;
+};
+
+/**
+ * struct pds_vdpa_vq_reset_cmd - queue reset command
+ * @opcode: Opcode PDS_VDPA_CMD_VQ_RESET
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ * @qid: Queue id
+ */
+struct pds_vdpa_vq_reset_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+ __le16 qid;
+};
+
+/**
+ * struct pds_vdpa_set_features_cmd - set hw features
+ * @opcode: Opcode PDS_VDPA_CMD_SET_FEATURES
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ * @rsvd: Word boundary padding
+ * @features: Feature bit mask
+ */
+struct pds_vdpa_set_features_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+ __le32 rsvd;
+ __le64 features;
+};
+
+/**
+ * struct pds_vdpa_vq_set_state_cmd - set vq state
+ * @opcode: Opcode PDS_VDPA_CMD_VQ_SET_STATE
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ * @qid: Queue id
+ * @avail: Device avail index.
+ * @used: Device used index.
+ *
+ * If the virtqueue uses packed descriptor format, then the avail and used
+ * index must have a wrap count. The bits should be arranged like the upper
+ * 16 bits in the device available notification data: 15 bit index, 1 bit wrap.
+ */
+struct pds_vdpa_vq_set_state_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+ __le16 qid;
+ __le16 avail;
+ __le16 used;
+};
+
+/**
+ * struct pds_vdpa_vq_get_state_cmd - get vq state
+ * @opcode: Opcode PDS_VDPA_CMD_VQ_GET_STATE
+ * @vdpa_index: Index for vdpa subdevice
+ * @vf_id: VF id
+ * @qid: Queue id
+ */
+struct pds_vdpa_vq_get_state_cmd {
+ u8 opcode;
+ u8 vdpa_index;
+ __le16 vf_id;
+ __le16 qid;
+};
+
+/**
+ * struct pds_vdpa_vq_get_state_comp - get vq state completion
+ * @status: Status of the command (enum pds_core_status_code)
+ * @rsvd0: Word boundary padding
+ * @avail: Device avail index.
+ * @used: Device used index.
+ * @rsvd: Word boundary padding
+ * @color: Color bit
+ *
+ * If the virtqueue uses packed descriptor format, then the avail and used
+ * index will have a wrap count. The bits will be arranged like the "next"
+ * part of device available notification data: 15 bit index, 1 bit wrap.
+ */
+struct pds_vdpa_vq_get_state_comp {
+ u8 status;
+ u8 rsvd0;
+ __le16 avail;
+ __le16 used;
+ u8 rsvd[9];
+ u8 color;
+};
+
union pds_core_adminq_cmd {
u8 opcode;
u8 bytes[64];
@@ -621,6 +872,18 @@ union pds_core_adminq_cmd {
struct pds_core_q_identify_cmd q_ident;
struct pds_core_q_init_cmd q_init;
+
+ struct pds_vdpa_cmd vdpa;
+ struct pds_vdpa_init_cmd vdpa_init;
+ struct pds_vdpa_ident_cmd vdpa_ident;
+ struct pds_vdpa_status_cmd vdpa_status;
+ struct pds_vdpa_setattr_cmd vdpa_setattr;
+ struct pds_vdpa_set_features_cmd vdpa_set_features;
+ struct pds_vdpa_vq_init_cmd vdpa_vq_init;
+ struct pds_vdpa_vq_reset_cmd vdpa_vq_reset;
+ struct pds_vdpa_vq_set_state_cmd vdpa_vq_set_state;
+ struct pds_vdpa_vq_get_state_cmd vdpa_vq_get_state;
+
};
union pds_core_adminq_comp {
@@ -642,6 +905,9 @@ union pds_core_adminq_comp {
struct pds_core_q_identify_comp q_ident;
struct pds_core_q_init_comp q_init;
+
+ struct pds_vdpa_vq_init_comp vdpa_vq_init;
+ struct pds_vdpa_vq_get_state_comp vdpa_vq_get_state;
};
#ifndef __CHECKER__
--
2.17.1
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
