Re: [PATCH net-next V2 1/2] virtio-net: convert rx mode setting to use workqueue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 14, 2023 at 01:04:15PM +0800, Jason Wang wrote:
> Forget to cc netdev, adding.
> 
> On Fri, Apr 14, 2023 at 12:25 AM Michael S. Tsirkin <mst@xxxxxxxxxx> wrote:
> >
> > On Thu, Apr 13, 2023 at 02:40:26PM +0800, Jason Wang wrote:
> > > This patch convert rx mode setting to be done in a workqueue, this is
> > > a must for allow to sleep when waiting for the cvq command to
> > > response since current code is executed under addr spin lock.
> > >
> > > Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> >
> > I don't like this frankly. This means that setting RX mode which would
> > previously be reliable, now becomes unreliable.
> 
> It is "unreliable" by design:
> 
>       void                    (*ndo_set_rx_mode)(struct net_device *dev);
> 
> > - first of all configuration is no longer immediate
> 
> Is immediate a hard requirement? I can see a workqueue is used at least:
> 
> mlx5e, ipoib, efx, ...
> 
> >   and there is no way for driver to find out when
> >   it actually took effect
> 
> But we know rx mode is best effort e.g it doesn't support vhost and we
> survive from this for years.
> 
> > - second, if device fails command, this is also not
> >   propagated to driver, again no way for driver to find out
> >
> > VDUSE needs to be fixed to do tricks to fix this
> > without breaking normal drivers.
> 
> It's not specific to VDUSE. For example, when using virtio-net in the
> UP environment with any software cvq (like mlx5 via vDPA or cma
> transport).
> 
> Thanks

Hmm. Can we differentiate between these use-cases?

> >
> >
> > > ---
> > > Changes since V1:
> > > - use RTNL to synchronize rx mode worker
> > > ---
> > >  drivers/net/virtio_net.c | 55 +++++++++++++++++++++++++++++++++++++---
> > >  1 file changed, 52 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > index e2560b6f7980..2e56bbf86894 100644
> > > --- a/drivers/net/virtio_net.c
> > > +++ b/drivers/net/virtio_net.c
> > > @@ -265,6 +265,12 @@ struct virtnet_info {
> > >       /* Work struct for config space updates */
> > >       struct work_struct config_work;
> > >
> > > +     /* Work struct for config rx mode */
> > > +     struct work_struct rx_mode_work;
> > > +
> > > +     /* Is rx mode work enabled? */
> > > +     bool rx_mode_work_enabled;
> > > +
> > >       /* Does the affinity hint is set for virtqueues? */
> > >       bool affinity_hint_set;
> > >
> > > @@ -388,6 +394,20 @@ static void disable_delayed_refill(struct virtnet_info *vi)
> > >       spin_unlock_bh(&vi->refill_lock);
> > >  }
> > >
> > > +static void enable_rx_mode_work(struct virtnet_info *vi)
> > > +{
> > > +     rtnl_lock();
> > > +     vi->rx_mode_work_enabled = true;
> > > +     rtnl_unlock();
> > > +}
> > > +
> > > +static void disable_rx_mode_work(struct virtnet_info *vi)
> > > +{
> > > +     rtnl_lock();
> > > +     vi->rx_mode_work_enabled = false;
> > > +     rtnl_unlock();
> > > +}
> > > +
> > >  static void virtqueue_napi_schedule(struct napi_struct *napi,
> > >                                   struct virtqueue *vq)
> > >  {
> > > @@ -2310,9 +2330,11 @@ static int virtnet_close(struct net_device *dev)
> > >       return 0;
> > >  }
> > >
> > > -static void virtnet_set_rx_mode(struct net_device *dev)
> > > +static void virtnet_rx_mode_work(struct work_struct *work)
> > >  {
> > > -     struct virtnet_info *vi = netdev_priv(dev);
> > > +     struct virtnet_info *vi =
> > > +             container_of(work, struct virtnet_info, rx_mode_work);
> > > +     struct net_device *dev = vi->dev;
> > >       struct scatterlist sg[2];
> > >       struct virtio_net_ctrl_mac *mac_data;
> > >       struct netdev_hw_addr *ha;
> > > @@ -2325,6 +2347,8 @@ static void virtnet_set_rx_mode(struct net_device *dev)
> > >       if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_RX))
> > >               return;
> > >
> > > +     rtnl_lock();
> > > +
> > >       vi->ctrl->promisc = ((dev->flags & IFF_PROMISC) != 0);
> > >       vi->ctrl->allmulti = ((dev->flags & IFF_ALLMULTI) != 0);
> > >
> > > @@ -2342,14 +2366,19 @@ static void virtnet_set_rx_mode(struct net_device *dev)
> > >               dev_warn(&dev->dev, "Failed to %sable allmulti mode.\n",
> > >                        vi->ctrl->allmulti ? "en" : "dis");
> > >
> > > +     netif_addr_lock_bh(dev);
> > > +
> > >       uc_count = netdev_uc_count(dev);
> > >       mc_count = netdev_mc_count(dev);
> > >       /* MAC filter - use one buffer for both lists */
> > >       buf = kzalloc(((uc_count + mc_count) * ETH_ALEN) +
> > >                     (2 * sizeof(mac_data->entries)), GFP_ATOMIC);
> > >       mac_data = buf;
> > > -     if (!buf)
> > > +     if (!buf) {
> > > +             netif_addr_unlock_bh(dev);
> > > +             rtnl_unlock();
> > >               return;
> > > +     }
> > >
> > >       sg_init_table(sg, 2);
> > >
> > > @@ -2370,6 +2399,8 @@ static void virtnet_set_rx_mode(struct net_device *dev)
> > >       netdev_for_each_mc_addr(ha, dev)
> > >               memcpy(&mac_data->macs[i++][0], ha->addr, ETH_ALEN);
> > >
> > > +     netif_addr_unlock_bh(dev);
> > > +
> > >       sg_set_buf(&sg[1], mac_data,
> > >                  sizeof(mac_data->entries) + (mc_count * ETH_ALEN));
> > >
> > > @@ -2377,9 +2408,19 @@ static void virtnet_set_rx_mode(struct net_device *dev)
> > >                                 VIRTIO_NET_CTRL_MAC_TABLE_SET, sg))
> > >               dev_warn(&dev->dev, "Failed to set MAC filter table.\n");
> > >
> > > +     rtnl_unlock();
> > > +
> > >       kfree(buf);
> > >  }
> > >
> > > +static void virtnet_set_rx_mode(struct net_device *dev)
> > > +{
> > > +     struct virtnet_info *vi = netdev_priv(dev);
> > > +
> > > +     if (vi->rx_mode_work_enabled)
> > > +             schedule_work(&vi->rx_mode_work);
> > > +}
> > > +
> > >  static int virtnet_vlan_rx_add_vid(struct net_device *dev,
> > >                                  __be16 proto, u16 vid)
> > >  {
> > > @@ -3150,6 +3191,8 @@ static void virtnet_freeze_down(struct virtio_device *vdev)
> > >
> > >       /* Make sure no work handler is accessing the device */
> > >       flush_work(&vi->config_work);
> > > +     disable_rx_mode_work(vi);
> > > +     flush_work(&vi->rx_mode_work);
> > >
> > >       netif_tx_lock_bh(vi->dev);
> > >       netif_device_detach(vi->dev);
> >
> > So now configuration is not propagated to device.
> > Won't device later wake up in wrong state?
> >
> >
> > > @@ -3172,6 +3215,7 @@ static int virtnet_restore_up(struct virtio_device *vdev)
> > >       virtio_device_ready(vdev);
> > >
> > >       enable_delayed_refill(vi);
> > > +     enable_rx_mode_work(vi);
> > >
> > >       if (netif_running(vi->dev)) {
> > >               err = virtnet_open(vi->dev);
> > > @@ -3969,6 +4013,7 @@ static int virtnet_probe(struct virtio_device *vdev)
> > >       vdev->priv = vi;
> > >
> > >       INIT_WORK(&vi->config_work, virtnet_config_changed_work);
> > > +     INIT_WORK(&vi->rx_mode_work, virtnet_rx_mode_work);
> > >       spin_lock_init(&vi->refill_lock);
> > >
> > >       if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF)) {
> > > @@ -4077,6 +4122,8 @@ static int virtnet_probe(struct virtio_device *vdev)
> > >       if (vi->has_rss || vi->has_rss_hash_report)
> > >               virtnet_init_default_rss(vi);
> > >
> > > +     enable_rx_mode_work(vi);
> > > +
> > >       /* serialize netdev register + virtio_device_ready() with ndo_open() */
> > >       rtnl_lock();
> > >
> > > @@ -4174,6 +4221,8 @@ static void virtnet_remove(struct virtio_device *vdev)
> > >
> > >       /* Make sure no work handler is accessing the device. */
> > >       flush_work(&vi->config_work);
> > > +     disable_rx_mode_work(vi);
> > > +     flush_work(&vi->rx_mode_work);
> > >
> > >       unregister_netdev(vi->dev);
> > >
> > > --
> > > 2.25.1
> >

_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization




[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux