On Fri, Jan 13, 2023 at 3:37 PM Parav Pandit <parav@xxxxxxxxxx> wrote:
>
>
> > From: Alexander H Duyck <alexander.duyck@xxxxxxxxx>
> > Sent: Friday, January 13, 2023 6:24 PM
> >
> > On Sat, 2023-01-14 at 00:36 +0200, Parav Pandit wrote:
> > > A smallest Ethernet frame defined by IEEE 802.3 is 60 bytes without
> > > any preemble and CRC.
> > >
> > > Current code only checks for minimal 14 bytes of Ethernet header length.
> > > Correct it to consider the minimum Ethernet frame length.
> > >
> > > Fixes: 296f96fcfc16 ("Net driver using virtio")
> > > Signed-off-by: Parav Pandit <parav@xxxxxxxxxx>
> > > ---
> > > drivers/net/virtio_net.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index
> > > 7723b2a49d8e..d45e140b6852 100644
> > > --- a/drivers/net/virtio_net.c
> > > +++ b/drivers/net/virtio_net.c
> > > @@ -1248,7 +1248,7 @@ static void receive_buf(struct virtnet_info *vi,
> > struct receive_queue *rq,
> > > struct sk_buff *skb;
> > > struct virtio_net_hdr_mrg_rxbuf *hdr;
> > >
> > > - if (unlikely(len < vi->hdr_len + ETH_HLEN)) {
> > > + if (unlikely(len < vi->hdr_len + ETH_ZLEN)) {
> > > pr_debug("%s: short packet %i\n", dev->name, len);
> > > dev->stats.rx_length_errors++;
> > > if (vi->mergeable_rx_bufs) {
> >
> > I'm not sure I agree with this change as packets are only 60B if they have gone
> > across the wire as they are usually padded out on the transmit side. There may
> > be cases where software routed packets may not be 60B.
> >
> Do you mean Linux kernel software? Any link to it would be helpful.
The problem is there are several software paths involved and that is
why I am wanting to be cautious. As I recall this would impact Qemu
itself, DPDK, the Linux Kernel and several others if I am not
mistaken. That is why I am tending to err on the side of caution as
this is a pretty significant change.
> > As such rather than changing out ETH_HLEN for ETH_ZLEN I wonder if we
> > should look at maybe making this a "<=" comparison instead since that is the
> > only case I can think of where the packet would end up being entirely empty
> > after eth_type_trans is called and we would be passing an skb with length 0.
>
> I likely didn’t understand your comment.
> This driver check is before creating the skb for the received packet.
> So, purpose is to not even process the packet header or prepare the skb if it not an Ethernet frame.
>
> It is interesting to know when we get < 60B frame.
If I recall, a UDPv4 frame can easily do it since Ethernet is 14B, IP
header is 20, and UDP is only 8 so that only comes to 42B if I recall
correctly. Similarly I think a TCPv4 Frame can be as small as 54B if
you disable all the option headers.
A quick and dirty test would be to run something like a netperf UDP_RR
test. I know in the case of the network stack we see the transmits
that go out are less than 60B until they are padded on xmit, usually
by the device. My concern is wanting to make sure all those paths are
covered before we assume that all the packets will be padded.
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
