[PATCH v8 2/3] PCI: Avoid FLR for SolidRun SNET DPU rev 1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch fixes a FLR bug on the SNET DPU rev 1 by setting
the PCI_DEV_FLAGS_NO_FLR_RESET flag.

As there is a quirk to avoid FLR (quirk_no_flr), I added a new
quirk to check the rev ID before calling to quirk_no_flr.

Without this patch, a SNET DPU rev 1 may hang when FLR is applied.

Signed-off-by: Alvaro Karsz <alvaro.karsz@xxxxxxxxxxxxx>
Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
 drivers/pci/quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 285acc4aacc..809d03272c2 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5343,6 +5343,14 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);

+/* FLR may cause the SolidRun SNET DPU (rev 0x1) to hang */
+static void quirk_no_flr_snet(struct pci_dev *dev)
+{
+	if (dev->revision == 0x1)
+		quirk_no_flr(dev);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLIDRUN, 0x1000, quirk_no_flr_snet);
+
 static void quirk_no_ext_tags(struct pci_dev *pdev)
 {
 	struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);
--
2.32.0
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux