On Tue, Nov 08, 2022 at 11:16:01PM +0800, Wei Li wrote:
> When doing "cat /proc/interrupts" after qxl.ko is unloaded, an oops occurs:
>
> BUG: unable to handle page fault for address: ffffffffc0274769
> PGD 2a0d067 P4D 2a0d067 PUD 2a0f067 PMD 103f39067 PTE 0
> Oops: 0000 [#1] PREEMPT SMP PTI
> CPU: 6 PID: 246 Comm: cat Not tainted 6.1.0-rc2 #24
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
> RIP: 0010:string_nocheck+0x34/0x50
> Code: 66 85 c0 74 3c 83 e8 01 4c 8d 5c 07 01 31 c0 eb 19 49 39 fa 76 03 44 88 07 48 83 c7
> RSP: 0018:ffffc90000893bb8 EFLAGS: 00010046
> RAX: 0000000000000000 RBX: ffffc90000893c50 RCX: ffff0a00ffffff04
> RDX: ffffffffc0274769 RSI: ffff888102812000 RDI: ffff88810281133e
> RBP: ffff888102812000 R08: ffffffff823fa5e6 R09: 0000000000000007
> R10: ffff888102812000 R11: ffff88820281133d R12: ffffffffc0274769
> R13: ffff0a00ffffff04 R14: 0000000000000cc4 R15: ffffffff823276b4
> FS: 000000000214f8c0(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: ffffffffc0274769 CR3: 00000001025c4005 CR4: 0000000000770ee0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> PKRU: 55555554
> Call Trace:
> <TASK>
> string+0x46/0x60
> vsnprintf+0x27a/0x4f0
> seq_vprintf+0x34/0x50
> seq_printf+0x53/0x70
> ? seq_read_iter+0x365/0x450
> show_interrupts+0x259/0x330
> seq_read_iter+0x2a3/0x450
> proc_reg_read_iter+0x47/0x70
> generic_file_splice_read+0x94/0x160
> splice_direct_to_actor+0xb0/0x230
> ? do_splice_direct+0xd0/0xd0
> do_splice_direct+0x8b/0xd0
> do_sendfile+0x345/0x4f0
> __x64_sys_sendfile64+0xa1/0xc0
> do_syscall_64+0x38/0x90
> entry_SYSCALL_64_after_hwframe+0x63/0xcd
> RIP: 0033:0x4bb0ce
> Code: c3 0f 1f 00 4c 89 d2 4c 89 c6 e9 bd fd ff ff 0f 1f 44 00 00 31 c0 c3 0f 1f 44 00 00
> RSP: 002b:00007ffd99dc3fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
> RAX: ffffffffffffffda RBX: 0000000001000000 RCX: 00000000004bb0ce
> RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000001
> RBP: 0000000000000001 R08: 000000000068f240 R09: 0000000001000000
> R10: 0000000001000000 R11: 0000000000000246 R12: 0000000000000003
> R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
> </TASK>
>
> It seems that qxl doesn't free the interrupt it requests during unload,
> fix this by adding the missing free_irq().
>
> Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)")
> Signed-off-by: Wei Li <liwei391@xxxxxxxxxx>
Could we go right ahead and switch over to devm_request_irq? Or does that
not quite do the right thing here?
-Daniel
> ---
> drivers/gpu/drm/qxl/qxl_kms.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c
> index dc3828db1991..d591084824de 100644
> --- a/drivers/gpu/drm/qxl/qxl_kms.c
> +++ b/drivers/gpu/drm/qxl/qxl_kms.c
> @@ -283,6 +283,8 @@ int qxl_device_init(struct qxl_device *qdev,
> void qxl_device_fini(struct qxl_device *qdev)
> {
> int cur_idx;
> + struct drm_device *ddev = &qdev->ddev;
> + struct pci_dev *pdev = to_pci_dev(ddev->dev);
>
> /* check if qxl_device_init() was successful (gc_work is initialized last) */
> if (!qdev->gc_work.func)
> @@ -305,6 +307,7 @@ void qxl_device_fini(struct qxl_device *qdev)
> wait_event_timeout(qdev->release_event,
> atomic_read(&qdev->release_count) == 0,
> HZ);
> + free_irq(pdev->irq, ddev);
> flush_work(&qdev->gc_work);
> qxl_surf_evict(qdev);
> qxl_vram_evict(qdev);
> --
> 2.25.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
