On 7/27/2022 7:06 PM, Jason Wang wrote:
在 2022/7/28 08:56, Si-Wei Liu 写道:
On 7/27/2022 4:47 AM, Zhu, Lingshan wrote:
On 7/27/2022 5:43 PM, Si-Wei Liu wrote:
Sorry to chime in late in the game. For some reason I couldn't get
to most emails for this discussion (I only subscribed to the
virtualization list), while I was taking off amongst the past few
weeks.
It looks to me this patch is incomplete. Noted down the way in
vdpa_dev_net_config_fill(), we have the following:
features = vdev->config->get_driver_features(vdev);
if (nla_put_u64_64bit(msg,
VDPA_ATTR_DEV_NEGOTIATED_FEATURES, features,
VDPA_ATTR_PAD))
return -EMSGSIZE;
Making call to .get_driver_features() doesn't make sense when
feature negotiation isn't complete. Neither should present
negotiated_features to userspace before negotiation is done.
Similarly, max_vqp through vdpa_dev_net_mq_config_fill() probably
should not show before negotiation is done - it depends on driver
features negotiated.
I have another patch in this series introduces device_features and
will report device_features to the userspace even features
negotiation not done. Because the spec says we should allow driver
access the config space before FEATURES_OK.
The config space can be accessed by guest before features_ok doesn't
necessarily mean the value is valid.
It's valid as long as the device offers the feature:
"The device MUST allow reading of any device-specific configuration
field before FEATURES_OK is set by the driver. This includes fields
which are conditional on feature bits, as long as those feature bits
are offered by the device."
I guess this statement only conveys that the field in config space can
be read before FEATURES_OK is set, though it does not *explicitly*
states the validity of field.
And looking at:
"The mac address field always exists (though is only valid if
VIRTIO_NET_F_MAC is set), and status only exists if VIRTIO_NET_F_STATUS
is set."
It appears to me there's a border line set between "exist" and "valid".
If I understand the spec wording correctly, a spec-conforming device
implementation may or may not offer valid status value in the config
space when VIRTIO_NET_F_STATUS is offered, but before the feature is
negotiated. On the other hand, config space should contain valid mac
address the moment VIRTIO_NET_F_MAC feature is offered, regardless being
negotiated or not. By that, there seems to be leeway for the device
implementation to decide when config space field may become valid,
though for most of QEMU's software virtio devices, valid value is
present to config space the very first moment when feature is offered.
"If the VIRTIO_NET_F_MAC feature bit is set, the configuration space mac
entry indicates the “physical” address of the network card, otherwise
the driver would typically generate a random local MAC address."
"If the VIRTIO_NET_F_STATUS feature bit is negotiated, the link status
comes from the bottom bit of status. Otherwise, the driver assumes it’s
active."
And also there are special cases where the read of specific
configuration space field MUST be deferred to until FEATURES_OK is set:
"If the VIRTIO_BLK_F_CONFIG_WCE feature is negotiated, the cache mode
can be read or set through the writeback field. 0 corresponds to a
writethrough cache, 1 to a writeback cache11. The cache mode after reset
can be either writeback or writethrough. The actual mode can be
determined by reading writeback after feature negotiation."
"The driver MUST NOT read writeback before setting the FEATURES_OK
device status bit."
"If VIRTIO_BLK_F_CONFIG_WCE is negotiated but VIRTIO_BLK_F_FLUSH is not,
the device MUST initialize writeback to 0."
Since the spec doesn't explicitly mandate the validity of each config
space field when feature of concern is offered, to be safer we'd have to
live with odd device implementation. I know for sure QEMU software
devices won't for 99% of these cases, but that's not what is currently
defined in the spec.
You may want to double check with Michael for what he quoted earlier:
Nope:
2.5.1 Driver Requirements: Device Configuration Space
...
For optional configuration space fields, the driver MUST check that
the corresponding feature is offered
before accessing that part of the configuration space.
and how many driver bugs taking wrong assumption of the validity of
config space field without features_ok. I am not sure what use case
you want to expose config resister values for before features_ok, if
it's mostly for live migration I guess it's probably heading a wrong
direction.
I guess it's not for migration.
Then what's the other possible use case than live migration, were to
expose config space values? Troubleshooting config space discrepancy
between vDPA and the emulated virtio device in userspace? Or tracking
changes in config space across feature negotiation, but for what? It'd
be beneficial to the interface design if the specific use case can be
clearly described...
For migration, a provision with the correct features/capability would
be sufficient.
Right, that's what I thought too. It doesn't need to expose config space
values, simply exporting all attributes for vdpa device creation will do
the work.
-Siwei
Thanks
Last but not the least, this "vdpa dev config" command was not
designed to display the real config space register values in the
first place. Quoting the vdpa-dev(8) man page:
vdpa dev config show - Show configuration of specific device or
all devices.
DEV - specifies the vdpa device to show its configuration. If this
argument is omitted all devices configuration is listed.
It doesn't say anything about configuration space or register
values in config space. As long as it can convey the config
attribute when instantiating vDPA device instance, and more
importantly, the config can be easily imported from or exported to
userspace tools when trying to reconstruct vdpa instance intact on
destination host for live migration, IMHO in my personal
interpretation it doesn't matter what the config space may present.
It may be worth while adding a new debug command to expose the real
register value, but that's another story.
I am not sure getting your points. vDPA now reports device feature
bits(device_features) and negotiated feature bits(driver_features),
and yes, the drivers features can be a subset of the device
features; and the vDPA device features can be a subset of the
management device features.
What I said is after unblocking the conditional check, you'd have to
handle the case for each of the vdpa attribute when feature
negotiation is not yet done: basically the register values you got
from config space via the vdpa_get_config_unlocked() call is not
considered to be valid before features_ok (per-spec). Although in
some case you may get sane value, such behavior is generally
undefined. If you desire to show just the device_features alone
without any config space field, which the device had advertised
*before feature negotiation is complete*, that'll be fine. But looks
to me this is not how patch has been implemented. Probably need some
more work?
Regards,
-Siwei
Having said, please consider to drop the Fixes tag, as appears to
me you're proposing a new feature rather than fixing a real issue.
it's a new feature to report the device feature bits than only
negotiated features, however this patch is a must, or it will block
the device feature bits reporting. but I agree, the fix tag is not a
must.
Thanks,
-Siwei
On 7/1/2022 3:12 PM, Parav Pandit via Virtualization wrote:
From: Zhu Lingshan<lingshan.zhu@xxxxxxxxx>
Sent: Friday, July 1, 2022 9:28 AM
Users may want to query the config space of a vDPA device, to
choose a
appropriate one for a certain guest. This means the users need to
read the
config space before FEATURES_OK, and the existence of config space
contents does not depend on FEATURES_OK.
The spec says:
The device MUST allow reading of any device-specific
configuration field
before FEATURES_OK is set by the driver. This includes fields
which are
conditional on feature bits, as long as those feature bits are
offered by the
device.
Fixes: 30ef7a8ac8a07 (vdpa: Read device configuration only if
FEATURES_OK)
Fix is fine, but fixes tag needs correction described below.
Above commit id is 13 letters should be 12.
And
It should be in format
Fixes: 30ef7a8ac8a0 ("vdpa: Read device configuration only if
FEATURES_OK")
Please use checkpatch.pl script before posting the patches to
catch these errors.
There is a bot that looks at the fixes tag and identifies the
right kernel version to apply this fix.
Signed-off-by: Zhu Lingshan<lingshan.zhu@xxxxxxxxx>
---
drivers/vdpa/vdpa.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c index
9b0e39b2f022..d76b22b2f7ae 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -851,17 +851,9 @@ vdpa_dev_config_fill(struct vdpa_device *vdev,
struct sk_buff *msg, u32 portid, {
u32 device_id;
void *hdr;
- u8 status;
int err;
down_read(&vdev->cf_lock);
- status = vdev->config->get_status(vdev);
- if (!(status & VIRTIO_CONFIG_S_FEATURES_OK)) {
- NL_SET_ERR_MSG_MOD(extack, "Features negotiation not
completed");
- err = -EAGAIN;
- goto out;
- }
-
hdr = genlmsg_put(msg, portid, seq, &vdpa_nl_family, flags,
VDPA_CMD_DEV_CONFIG_GET);
if (!hdr) {
--
2.31.1
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://urldefense.com/v3/__https://lists.linuxfoundation.org/mailman/listinfo/virtualization__;!!ACWV5N9M2RV99hQ!Pkwym7OAjoDucUqs2fAwchxqL8-BGd6wOl-51xcgB_yCNwPJ_cs8A1y-cYmrLTB4OBNsimnZuqJPcvQIl3g$
_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
