Re: [PATCH v9 1/1] crypto: Introduce RSA algorithm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jun 11, 2022 at 11:36:58AM +0800, zhenwei pi wrote:
> There are two parts in this patch:
> 1, support akcipher service by cryptodev-builtin driver
> 2, virtio-crypto driver supports akcipher service
> 
> In principle, we should separate this into two patches, to avoid
> compiling error, merge them into one.
> 
> Then virtio-crypto gets request from guest side, and forwards the
> request to builtin driver to handle it.
> 
> Test with a guest linux:
> 1, The self-test framework of crypto layer works fine in guest kernel
> 2, Test with Linux guest(with asym support), the following script
> test(note that pkey_XXX is supported only in a newer version of keyutils):
>   - both public key & private key
>   - create/close session
>   - encrypt/decrypt/sign/verify basic driver operation
>   - also test with kernel crypto layer(pkey add/query)
> 
> All the cases work fine.
> 
> Run script in guest:
> rm -rf *.der *.pem *.pfx
> modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
> rm -rf /tmp/data
> dd if=/dev/random of=/tmp/data count=1 bs=20
> 
> openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@xxxxxxxx"
> openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
> openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der
> 
> PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
> echo "priv key id = "$PRIV_KEY_ID
> PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
> echo "pub key id = "$PUB_KEY_ID
> 
> keyctl pkey_query $PRIV_KEY_ID 0
> keyctl pkey_query $PUB_KEY_ID 0
> 
> echo "Enc with priv key..."
> keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv
> echo "Dec with pub key..."
> keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec
> cmp /tmp/data /tmp/dec
> 
> echo "Sign with priv key..."
> keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig
> echo "Verify with pub key..."
> keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
> 
> echo "Enc with pub key..."
> keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
> echo "Dec with priv key..."
> keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec
> cmp /tmp/data /tmp/dec
> 
> echo "Verify with pub key..."
> keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1
> 
> Reviewed-by: Gonglei <arei.gonglei@xxxxxxxxxx>
> Signed-off-by: lei he <helei.sig11@xxxxxxxxxxxxx
> Signed-off-by: zhenwei pi <pizhenwei@xxxxxxxxxxxxx>
> ---
>  backends/cryptodev-builtin.c      | 275 +++++++++++++++++++++----
>  backends/cryptodev-vhost-user.c   |  34 +++-
>  backends/cryptodev.c              |  32 ++-
>  hw/virtio/virtio-crypto.c         | 323 ++++++++++++++++++++++++------
>  include/hw/virtio/virtio-crypto.h |   5 +-
>  include/sysemu/cryptodev.h        |  83 ++++++--
>  6 files changed, 608 insertions(+), 144 deletions(-)
> 
> diff --git a/backends/cryptodev-builtin.c b/backends/cryptodev-builtin.c
> index 0671bf9f3e..ed73ea789b 100644
> --- a/backends/cryptodev-builtin.c
> +++ b/backends/cryptodev-builtin.c
> @@ -26,6 +26,7 @@
>  #include "qapi/error.h"
>  #include "standard-headers/linux/virtio_crypto.h"
>  #include "crypto/cipher.h"
> +#include "crypto/akcipher.h"
>  #include "qom/object.h"
>  
>  
> @@ -42,10 +43,11 @@ typedef struct CryptoDevBackendBuiltinSession {
>      QCryptoCipher *cipher;
>      uint8_t direction; /* encryption or decryption */
>      uint8_t type; /* cipher? hash? aead? */
> +    QCryptoAkCipher *akcipher;
>      QTAILQ_ENTRY(CryptoDevBackendBuiltinSession) next;
>  } CryptoDevBackendBuiltinSession;
>  
> -/* Max number of symmetric sessions */
> +/* Max number of symmetric/asymmetric sessions */
>  #define MAX_NUM_SESSIONS 256
>  
>  #define CRYPTODEV_BUITLIN_MAX_AUTH_KEY_LEN    512
> @@ -80,15 +82,17 @@ static void cryptodev_builtin_init(
>      backend->conf.crypto_services =
>                           1u << VIRTIO_CRYPTO_SERVICE_CIPHER |
>                           1u << VIRTIO_CRYPTO_SERVICE_HASH |
> -                         1u << VIRTIO_CRYPTO_SERVICE_MAC;
> +                         1u << VIRTIO_CRYPTO_SERVICE_MAC |
> +                         1u << VIRTIO_CRYPTO_SERVICE_AKCIPHER;
>      backend->conf.cipher_algo_l = 1u << VIRTIO_CRYPTO_CIPHER_AES_CBC;
>      backend->conf.hash_algo = 1u << VIRTIO_CRYPTO_HASH_SHA1;
> +    backend->conf.akcipher_algo = 1u << VIRTIO_CRYPTO_AKCIPHER_RSA;
>      /*
>       * Set the Maximum length of crypto request.
>       * Why this value? Just avoid to overflow when
>       * memory allocation for each crypto request.
>       */
> -    backend->conf.max_size = LONG_MAX - sizeof(CryptoDevBackendSymOpInfo);
> +    backend->conf.max_size = LONG_MAX - sizeof(CryptoDevBackendOpInfo);
>      backend->conf.max_cipher_key_len = CRYPTODEV_BUITLIN_MAX_CIPHER_KEY_LEN;
>      backend->conf.max_auth_key_len = CRYPTODEV_BUITLIN_MAX_AUTH_KEY_LEN;
>  
> @@ -148,6 +152,54 @@ err:
>     return -1;
>  }
>  
> +static int cryptodev_builtin_get_rsa_hash_algo(
> +    int virtio_rsa_hash, Error **errp)
> +{
> +    switch (virtio_rsa_hash) {
> +    case VIRTIO_CRYPTO_RSA_MD5:
> +        return QCRYPTO_HASH_ALG_MD5;
> +
> +    case VIRTIO_CRYPTO_RSA_SHA1:
> +        return QCRYPTO_HASH_ALG_SHA1;
> +
> +    case VIRTIO_CRYPTO_RSA_SHA256:
> +        return QCRYPTO_HASH_ALG_SHA256;
> +
> +    case VIRTIO_CRYPTO_RSA_SHA512:
> +        return QCRYPTO_HASH_ALG_SHA512;
> +
> +    default:
> +        error_setg(errp, "Unsupported rsa hash algo: %d", virtio_rsa_hash);
> +        return -1;
> +    }
> +}
> +
> +static int cryptodev_builtin_set_rsa_options(
> +                    int virtio_padding_algo,
> +                    int virtio_hash_algo,
> +                    QCryptoAkCipherOptionsRSA *opt,
> +                    Error **errp)
> +{
> +    if (virtio_padding_algo == VIRTIO_CRYPTO_RSA_PKCS1_PADDING) {
> +        opt->padding_alg = QCRYPTO_RSA_PADDING_ALG_PKCS1;
> +        int hash_alg;

I think you should combine declaration and assignment on the same line.
and then add an empty line after declarations before code.

> +        hash_alg = cryptodev_builtin_get_rsa_hash_algo(virtio_hash_algo, errp);
> +        if (hash_alg < 0) {
> +            return -1;
> +        }
> +        opt->hash_alg = hash_alg;
> +        return 0;
> +    }
> +
> +    if (virtio_padding_algo == VIRTIO_CRYPTO_RSA_RAW_PADDING) {
> +        opt->padding_alg = QCRYPTO_RSA_PADDING_ALG_RAW;
> +        return 0;
> +    }
> +
> +    error_setg(errp, "Unsupported rsa padding algo: %d", virtio_padding_algo);
> +    return -1;
> +}
> +
>  static int cryptodev_builtin_create_cipher_session(
>                      CryptoDevBackendBuiltin *builtin,
>                      CryptoDevBackendSymSessionInfo *sess_info,
> @@ -240,26 +292,89 @@ static int cryptodev_builtin_create_cipher_session(
>      return index;
>  }
>  
> -static int64_t cryptodev_builtin_sym_create_session(
> +static int cryptodev_builtin_create_akcipher_session(
> +                    CryptoDevBackendBuiltin *builtin,
> +                    CryptoDevBackendAsymSessionInfo *sess_info,
> +                    Error **errp)
> +{
> +    CryptoDevBackendBuiltinSession *sess;
> +    QCryptoAkCipher *akcipher;
> +    int index;
> +    QCryptoAkCipherKeyType type;
> +    QCryptoAkCipherOptions opts;
> +
> +    switch (sess_info->algo) {
> +    case VIRTIO_CRYPTO_AKCIPHER_RSA:
> +        opts.alg = QCRYPTO_AKCIPHER_ALG_RSA;
> +        if (cryptodev_builtin_set_rsa_options(sess_info->u.rsa.padding_algo,
> +            sess_info->u.rsa.hash_algo, &opts.u.rsa, errp) != 0) {
> +            return -1;
> +        }
> +        break;
> +
> +    /* TODO support DSA&ECDSA until qemu crypto framework support these */
> +
> +    default:
> +        error_setg(errp, "Unsupported akcipher alg %u", sess_info->algo);
> +        return -1;
> +    }
> +
> +    switch (sess_info->keytype) {
> +    case VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC:
> +        type = QCRYPTO_AKCIPHER_KEY_TYPE_PUBLIC;
> +        break;
> +
> +    case VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE:
> +        type = QCRYPTO_AKCIPHER_KEY_TYPE_PRIVATE;
> +        break;
> +
> +    default:
> +        error_setg(errp, "Unsupported akcipher keytype %u", sess_info->keytype);
> +        return -1;
> +    }
> +
> +    index = cryptodev_builtin_get_unused_session_index(builtin);
> +    if (index < 0) {
> +        error_setg(errp, "Total number of sessions created exceeds %u",
> +                   MAX_NUM_SESSIONS);
> +        return -1;
> +    }
> +
> +    akcipher = qcrypto_akcipher_new(&opts, type, sess_info->key,
> +                                    sess_info->keylen, errp);
> +    if (!akcipher) {
> +        return -1;
> +    }
> +
> +    sess = g_new0(CryptoDevBackendBuiltinSession, 1);
> +    sess->akcipher = akcipher;
> +
> +    builtin->sessions[index] = sess;
> +
> +    return index;
> +}
> +
> +static int64_t cryptodev_builtin_create_session(
>             CryptoDevBackend *backend,
> -           CryptoDevBackendSymSessionInfo *sess_info,
> +           CryptoDevBackendSessionInfo *sess_info,
>             uint32_t queue_index, Error **errp)
>  {
>      CryptoDevBackendBuiltin *builtin =
>                        CRYPTODEV_BACKEND_BUILTIN(backend);
> -    int64_t session_id = -1;
> -    int ret;
> +    CryptoDevBackendSymSessionInfo *sym_sess_info;
> +    CryptoDevBackendAsymSessionInfo *asym_sess_info;
>  
>      switch (sess_info->op_code) {
>      case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
> -        ret = cryptodev_builtin_create_cipher_session(
> -                           builtin, sess_info, errp);
> -        if (ret < 0) {
> -            return ret;
> -        } else {
> -            session_id = ret;
> -        }
> -        break;
> +        sym_sess_info = &sess_info->u.sym_sess_info;
> +        return cryptodev_builtin_create_cipher_session(
> +                           builtin, sym_sess_info, errp);
> +
> +    case VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION:
> +        asym_sess_info = &sess_info->u.asym_sess_info;
> +        return cryptodev_builtin_create_akcipher_session(
> +                           builtin, asym_sess_info, errp);
> +
>      case VIRTIO_CRYPTO_HASH_CREATE_SESSION:
>      case VIRTIO_CRYPTO_MAC_CREATE_SESSION:
>      default:
> @@ -268,50 +383,44 @@ static int64_t cryptodev_builtin_sym_create_session(
>          return -1;
>      }
>  
> -    return session_id;
> +    return -1;
>  }
>  
> -static int cryptodev_builtin_sym_close_session(
> +static int cryptodev_builtin_close_session(
>             CryptoDevBackend *backend,
>             uint64_t session_id,
>             uint32_t queue_index, Error **errp)
>  {
>      CryptoDevBackendBuiltin *builtin =
>                        CRYPTODEV_BACKEND_BUILTIN(backend);
> +    CryptoDevBackendBuiltinSession *session;
>  
>      assert(session_id < MAX_NUM_SESSIONS && builtin->sessions[session_id]);
>  
> -    qcrypto_cipher_free(builtin->sessions[session_id]->cipher);
> -    g_free(builtin->sessions[session_id]);
> +    session = builtin->sessions[session_id];
> +    if (session->cipher) {
> +        qcrypto_cipher_free(session->cipher);
> +    } else if (session->akcipher) {
> +        qcrypto_akcipher_free(session->akcipher);
> +    }
> +
> +    g_free(session);
>      builtin->sessions[session_id] = NULL;
>      return 0;
>  }
>  
>  static int cryptodev_builtin_sym_operation(
> -                 CryptoDevBackend *backend,
> -                 CryptoDevBackendSymOpInfo *op_info,
> -                 uint32_t queue_index, Error **errp)
> +                 CryptoDevBackendBuiltinSession *sess,
> +                 CryptoDevBackendSymOpInfo *op_info, Error **errp)
>  {
> -    CryptoDevBackendBuiltin *builtin =
> -                      CRYPTODEV_BACKEND_BUILTIN(backend);
> -    CryptoDevBackendBuiltinSession *sess;
>      int ret;
>  
> -    if (op_info->session_id >= MAX_NUM_SESSIONS ||
> -              builtin->sessions[op_info->session_id] == NULL) {
> -        error_setg(errp, "Cannot find a valid session id: %" PRIu64 "",
> -                   op_info->session_id);
> -        return -VIRTIO_CRYPTO_INVSESS;
> -    }
> -
>      if (op_info->op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
>          error_setg(errp,
>                 "Algorithm chain is unsupported for cryptdoev-builtin");
>          return -VIRTIO_CRYPTO_NOTSUPP;
>      }
>  
> -    sess = builtin->sessions[op_info->session_id];
> -
>      if (op_info->iv_len > 0) {
>          ret = qcrypto_cipher_setiv(sess->cipher, op_info->iv,
>                                     op_info->iv_len, errp);
> @@ -333,9 +442,99 @@ static int cryptodev_builtin_sym_operation(
>              return -VIRTIO_CRYPTO_ERR;
>          }
>      }
> +
> +    return VIRTIO_CRYPTO_OK;
> +}
> +
> +static int cryptodev_builtin_asym_operation(
> +                 CryptoDevBackendBuiltinSession *sess, uint32_t op_code,
> +                 CryptoDevBackendAsymOpInfo *op_info, Error **errp)
> +{
> +    int ret;
> +
> +    switch (op_code) {
> +    case VIRTIO_CRYPTO_AKCIPHER_ENCRYPT:
> +        ret = qcrypto_akcipher_encrypt(sess->akcipher,
> +                                       op_info->src, op_info->src_len,
> +                                       op_info->dst, op_info->dst_len, errp);
> +        break;
> +
> +    case VIRTIO_CRYPTO_AKCIPHER_DECRYPT:
> +        ret = qcrypto_akcipher_decrypt(sess->akcipher,
> +                                       op_info->src, op_info->src_len,
> +                                       op_info->dst, op_info->dst_len, errp);
> +        break;
> +
> +    case VIRTIO_CRYPTO_AKCIPHER_SIGN:
> +        ret = qcrypto_akcipher_sign(sess->akcipher,
> +                                    op_info->src, op_info->src_len,
> +                                    op_info->dst, op_info->dst_len, errp);
> +        break;
> +
> +    case VIRTIO_CRYPTO_AKCIPHER_VERIFY:
> +        ret = qcrypto_akcipher_verify(sess->akcipher,
> +                                      op_info->src, op_info->src_len,
> +                                      op_info->dst, op_info->dst_len, errp);
> +        break;
> +
> +    default:
> +        return -VIRTIO_CRYPTO_ERR;
> +    }
> +
> +    if (ret < 0) {
> +        if (op_code == VIRTIO_CRYPTO_AKCIPHER_VERIFY) {
> +            return -VIRTIO_CRYPTO_KEY_REJECTED;
> +        }
> +        return -VIRTIO_CRYPTO_ERR;
> +    }
> +
> +    /* Buffer is too short, typically the driver should handle this case */
> +    if (unlikely(ret > op_info->dst_len)) {
> +        if (errp && !*errp) {
> +            error_setg(errp, "dst buffer too short");
> +        }
> +
> +        return -VIRTIO_CRYPTO_ERR;
> +    }
> +
> +    op_info->dst_len = ret;
> +
>      return VIRTIO_CRYPTO_OK;
>  }
>  
> +static int cryptodev_builtin_operation(
> +                 CryptoDevBackend *backend,
> +                 CryptoDevBackendOpInfo *op_info,
> +                 uint32_t queue_index, Error **errp)
> +{
> +    CryptoDevBackendBuiltin *builtin =
> +                      CRYPTODEV_BACKEND_BUILTIN(backend);
> +    CryptoDevBackendBuiltinSession *sess;
> +    CryptoDevBackendSymOpInfo *sym_op_info;
> +    CryptoDevBackendAsymOpInfo *asym_op_info;
> +    enum CryptoDevBackendAlgType algtype = op_info->algtype;
> +    int ret = -VIRTIO_CRYPTO_ERR;
> +
> +    if (op_info->session_id >= MAX_NUM_SESSIONS ||
> +              builtin->sessions[op_info->session_id] == NULL) {
> +        error_setg(errp, "Cannot find a valid session id: %" PRIu64 "",
> +                   op_info->session_id);
> +        return -VIRTIO_CRYPTO_INVSESS;
> +    }
> +
> +    sess = builtin->sessions[op_info->session_id];
> +    if (algtype == CRYPTODEV_BACKEND_ALG_SYM) {
> +        sym_op_info = op_info->u.sym_op_info;
> +        ret = cryptodev_builtin_sym_operation(sess, sym_op_info, errp);
> +    } else if (algtype == CRYPTODEV_BACKEND_ALG_ASYM) {
> +        asym_op_info = op_info->u.asym_op_info;
> +        ret = cryptodev_builtin_asym_operation(sess, op_info->op_code,
> +                                               asym_op_info, errp);
> +    }
> +
> +    return ret;
> +}
> +
>  static void cryptodev_builtin_cleanup(
>               CryptoDevBackend *backend,
>               Error **errp)
> @@ -348,7 +547,7 @@ static void cryptodev_builtin_cleanup(
>  
>      for (i = 0; i < MAX_NUM_SESSIONS; i++) {
>          if (builtin->sessions[i] != NULL) {
> -            cryptodev_builtin_sym_close_session(backend, i, 0, &error_abort);
> +            cryptodev_builtin_close_session(backend, i, 0, &error_abort);
>          }
>      }
>  
> @@ -370,9 +569,9 @@ cryptodev_builtin_class_init(ObjectClass *oc, void *data)
>  
>      bc->init = cryptodev_builtin_init;
>      bc->cleanup = cryptodev_builtin_cleanup;
> -    bc->create_session = cryptodev_builtin_sym_create_session;
> -    bc->close_session = cryptodev_builtin_sym_close_session;
> -    bc->do_sym_op = cryptodev_builtin_sym_operation;
> +    bc->create_session = cryptodev_builtin_create_session;
> +    bc->close_session = cryptodev_builtin_close_session;
> +    bc->do_op = cryptodev_builtin_operation;
>  }
>  
>  static const TypeInfo cryptodev_builtin_info = {
> diff --git a/backends/cryptodev-vhost-user.c b/backends/cryptodev-vhost-user.c
> index bedb452474..5443a59153 100644
> --- a/backends/cryptodev-vhost-user.c
> +++ b/backends/cryptodev-vhost-user.c
> @@ -259,7 +259,33 @@ static int64_t cryptodev_vhost_user_sym_create_session(
>      return -1;
>  }
>  
> -static int cryptodev_vhost_user_sym_close_session(
> +static int64_t cryptodev_vhost_user_create_session(
> +           CryptoDevBackend *backend,
> +           CryptoDevBackendSessionInfo *sess_info,
> +           uint32_t queue_index, Error **errp)
> +{
> +    uint32_t op_code = sess_info->op_code;
> +    CryptoDevBackendSymSessionInfo *sym_sess_info;
> +
> +    switch (op_code) {
> +    case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
> +    case VIRTIO_CRYPTO_HASH_CREATE_SESSION:
> +    case VIRTIO_CRYPTO_MAC_CREATE_SESSION:
> +    case VIRTIO_CRYPTO_AEAD_CREATE_SESSION:
> +        sym_sess_info = &sess_info->u.sym_sess_info;
> +        return cryptodev_vhost_user_sym_create_session(backend, sym_sess_info,
> +                   queue_index, errp);
> +    default:
> +        error_setg(errp, "Unsupported opcode :%" PRIu32 "",
> +                   sess_info->op_code);
> +        return -1;
> +
> +    }
> +
> +    return -1;
> +}
> +
> +static int cryptodev_vhost_user_close_session(
>             CryptoDevBackend *backend,
>             uint64_t session_id,
>             uint32_t queue_index, Error **errp)
> @@ -351,9 +377,9 @@ cryptodev_vhost_user_class_init(ObjectClass *oc, void *data)
>  
>      bc->init = cryptodev_vhost_user_init;
>      bc->cleanup = cryptodev_vhost_user_cleanup;
> -    bc->create_session = cryptodev_vhost_user_sym_create_session;
> -    bc->close_session = cryptodev_vhost_user_sym_close_session;
> -    bc->do_sym_op = NULL;
> +    bc->create_session = cryptodev_vhost_user_create_session;
> +    bc->close_session = cryptodev_vhost_user_close_session;
> +    bc->do_op = NULL;
>  
>      object_class_property_add_str(oc, "chardev",
>                                    cryptodev_vhost_user_get_chardev,
> diff --git a/backends/cryptodev.c b/backends/cryptodev.c
> index 2b105e433c..33eb4e1a70 100644
> --- a/backends/cryptodev.c
> +++ b/backends/cryptodev.c
> @@ -72,9 +72,9 @@ void cryptodev_backend_cleanup(
>      }
>  }
>  
> -int64_t cryptodev_backend_sym_create_session(
> +int64_t cryptodev_backend_create_session(
>             CryptoDevBackend *backend,
> -           CryptoDevBackendSymSessionInfo *sess_info,
> +           CryptoDevBackendSessionInfo *sess_info,
>             uint32_t queue_index, Error **errp)
>  {
>      CryptoDevBackendClass *bc =
> @@ -87,7 +87,7 @@ int64_t cryptodev_backend_sym_create_session(
>      return -1;
>  }
>  
> -int cryptodev_backend_sym_close_session(
> +int cryptodev_backend_close_session(
>             CryptoDevBackend *backend,
>             uint64_t session_id,
>             uint32_t queue_index, Error **errp)
> @@ -102,16 +102,16 @@ int cryptodev_backend_sym_close_session(
>      return -1;
>  }
>  
> -static int cryptodev_backend_sym_operation(
> +static int cryptodev_backend_operation(
>                   CryptoDevBackend *backend,
> -                 CryptoDevBackendSymOpInfo *op_info,
> +                 CryptoDevBackendOpInfo *op_info,
>                   uint32_t queue_index, Error **errp)
>  {
>      CryptoDevBackendClass *bc =
>                        CRYPTODEV_BACKEND_GET_CLASS(backend);
>  
> -    if (bc->do_sym_op) {
> -        return bc->do_sym_op(backend, op_info, queue_index, errp);
> +    if (bc->do_op) {
> +        return bc->do_op(backend, op_info, queue_index, errp);
>      }
>  
>      return -VIRTIO_CRYPTO_ERR;
> @@ -123,20 +123,18 @@ int cryptodev_backend_crypto_operation(
>                   uint32_t queue_index, Error **errp)
>  {
>      VirtIOCryptoReq *req = opaque;
> +    CryptoDevBackendOpInfo *op_info = &req->op_info;
> +    enum CryptoDevBackendAlgType algtype = req->flags;
>  
> -    if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
> -        CryptoDevBackendSymOpInfo *op_info;
> -        op_info = req->u.sym_op_info;
> -
> -        return cryptodev_backend_sym_operation(backend,
> -                         op_info, queue_index, errp);
> -    } else {
> +    if ((algtype != CRYPTODEV_BACKEND_ALG_SYM)
> +        && (algtype != CRYPTODEV_BACKEND_ALG_ASYM)) {
>          error_setg(errp, "Unsupported cryptodev alg type: %" PRIu32 "",
> -                   req->flags);
> -       return -VIRTIO_CRYPTO_NOTSUPP;
> +                   algtype);
> +
> +        return -VIRTIO_CRYPTO_NOTSUPP;
>      }
>  
> -    return -VIRTIO_CRYPTO_ERR;
> +    return cryptodev_backend_operation(backend, op_info, queue_index, errp);
>  }
>  
>  static void
> diff --git a/hw/virtio/virtio-crypto.c b/hw/virtio/virtio-crypto.c
> index c3829e7498..c1243c3f93 100644
> --- a/hw/virtio/virtio-crypto.c
> +++ b/hw/virtio/virtio-crypto.c
> @@ -83,7 +83,8 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
>                 struct iovec *iov, unsigned int out_num)
>  {
>      VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
> -    CryptoDevBackendSymSessionInfo info;
> +    CryptoDevBackendSessionInfo info;
> +    CryptoDevBackendSymSessionInfo *sym_info;
>      int64_t session_id;
>      int queue_index;
>      uint32_t op_type;
> @@ -92,11 +93,13 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
>  
>      memset(&info, 0, sizeof(info));
>      op_type = ldl_le_p(&sess_req->op_type);
> -    info.op_type = op_type;
>      info.op_code = opcode;
>  
> +    sym_info = &info.u.sym_sess_info;
> +    sym_info->op_type = op_type;
> +
>      if (op_type == VIRTIO_CRYPTO_SYM_OP_CIPHER) {
> -        ret = virtio_crypto_cipher_session_helper(vdev, &info,
> +        ret = virtio_crypto_cipher_session_helper(vdev, sym_info,
>                             &sess_req->u.cipher.para,
>                             &iov, &out_num);
>          if (ret < 0) {
> @@ -105,47 +108,47 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
>      } else if (op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
>          size_t s;
>          /* cipher part */
> -        ret = virtio_crypto_cipher_session_helper(vdev, &info,
> +        ret = virtio_crypto_cipher_session_helper(vdev, sym_info,
>                             &sess_req->u.chain.para.cipher_param,
>                             &iov, &out_num);
>          if (ret < 0) {
>              goto err;
>          }
>          /* hash part */
> -        info.alg_chain_order = ldl_le_p(
> +        sym_info->alg_chain_order = ldl_le_p(
>                                       &sess_req->u.chain.para.alg_chain_order);
> -        info.add_len = ldl_le_p(&sess_req->u.chain.para.aad_len);
> -        info.hash_mode = ldl_le_p(&sess_req->u.chain.para.hash_mode);
> -        if (info.hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH) {
> -            info.hash_alg = ldl_le_p(&sess_req->u.chain.para.u.mac_param.algo);
> -            info.auth_key_len = ldl_le_p(
> +        sym_info->add_len = ldl_le_p(&sess_req->u.chain.para.aad_len);
> +        sym_info->hash_mode = ldl_le_p(&sess_req->u.chain.para.hash_mode);
> +        if (sym_info->hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH) {
> +            sym_info->hash_alg =
> +                ldl_le_p(&sess_req->u.chain.para.u.mac_param.algo);
> +            sym_info->auth_key_len = ldl_le_p(
>                               &sess_req->u.chain.para.u.mac_param.auth_key_len);
> -            info.hash_result_len = ldl_le_p(
> +            sym_info->hash_result_len = ldl_le_p(
>                             &sess_req->u.chain.para.u.mac_param.hash_result_len);
> -            if (info.auth_key_len > vcrypto->conf.max_auth_key_len) {
> +            if (sym_info->auth_key_len > vcrypto->conf.max_auth_key_len) {
>                  error_report("virtio-crypto length of auth key is too big: %u",
> -                             info.auth_key_len);
> +                             sym_info->auth_key_len);
>                  ret = -VIRTIO_CRYPTO_ERR;
>                  goto err;
>              }
>              /* get auth key */
> -            if (info.auth_key_len > 0) {
> -                DPRINTF("auth_keylen=%" PRIu32 "\n", info.auth_key_len);
> -                info.auth_key = g_malloc(info.auth_key_len);
> -                s = iov_to_buf(iov, out_num, 0, info.auth_key,
> -                               info.auth_key_len);
> -                if (unlikely(s != info.auth_key_len)) {
> +            if (sym_info->auth_key_len > 0) {
> +                sym_info->auth_key = g_malloc(sym_info->auth_key_len);
> +                s = iov_to_buf(iov, out_num, 0, sym_info->auth_key,
> +                               sym_info->auth_key_len);
> +                if (unlikely(s != sym_info->auth_key_len)) {
>                      virtio_error(vdev,
>                            "virtio-crypto authenticated key incorrect");
>                      ret = -EFAULT;
>                      goto err;
>                  }
> -                iov_discard_front(&iov, &out_num, info.auth_key_len);
> +                iov_discard_front(&iov, &out_num, sym_info->auth_key_len);
>              }
> -        } else if (info.hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN) {
> -            info.hash_alg = ldl_le_p(
> +        } else if (sym_info->hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN) {
> +            sym_info->hash_alg = ldl_le_p(
>                               &sess_req->u.chain.para.u.hash_param.algo);
> -            info.hash_result_len = ldl_le_p(
> +            sym_info->hash_result_len = ldl_le_p(
>                          &sess_req->u.chain.para.u.hash_param.hash_result_len);
>          } else {
>              /* VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED */
> @@ -161,13 +164,10 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
>      }
>  
>      queue_index = virtio_crypto_vq2q(queue_id);
> -    session_id = cryptodev_backend_sym_create_session(
> +    session_id = cryptodev_backend_create_session(
>                                       vcrypto->cryptodev,
>                                       &info, queue_index, &local_err);
>      if (session_id >= 0) {
> -        DPRINTF("create session_id=%" PRIu64 " successfully\n",
> -                session_id);
> -
>          ret = session_id;
>      } else {
>          if (local_err) {
> @@ -177,11 +177,78 @@ virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto,
>      }
>  
>  err:
> -    g_free(info.cipher_key);
> -    g_free(info.auth_key);
> +    g_free(sym_info->cipher_key);
> +    g_free(sym_info->auth_key);
>      return ret;
>  }
>  
> +static int64_t
> +virtio_crypto_create_asym_session(VirtIOCrypto *vcrypto,
> +               struct virtio_crypto_akcipher_create_session_req *sess_req,
> +               uint32_t queue_id, uint32_t opcode,
> +               struct iovec *iov, unsigned int out_num)
> +{
> +    VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
> +    CryptoDevBackendSessionInfo info = {0};
> +    CryptoDevBackendAsymSessionInfo *asym_info;
> +    int64_t session_id;
> +    int queue_index;
> +    uint32_t algo, keytype, keylen;
> +    g_autofree uint8_t *key = NULL;
> +    Error *local_err = NULL;
> +
> +    algo = ldl_le_p(&sess_req->para.algo);
> +    keytype = ldl_le_p(&sess_req->para.keytype);
> +    keylen = ldl_le_p(&sess_req->para.keylen);
> +
> +    if ((keytype != VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC)
> +         && (keytype != VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE)) {
> +        error_report("unsupported asym keytype: %d", keytype);
> +        return -VIRTIO_CRYPTO_NOTSUPP;
> +    }
> +
> +    if (keylen) {
> +        key = g_malloc(keylen);
> +        if (iov_to_buf(iov, out_num, 0, key, keylen) != keylen) {
> +            virtio_error(vdev, "virtio-crypto asym key incorrect");
> +            return -EFAULT;
> +        }
> +        iov_discard_front(&iov, &out_num, keylen);
> +    }
> +
> +    info.op_code = opcode;
> +    asym_info = &info.u.asym_sess_info;
> +    asym_info->algo = algo;
> +    asym_info->keytype = keytype;
> +    asym_info->keylen = keylen;
> +    asym_info->key = key;
> +    switch (asym_info->algo) {
> +    case VIRTIO_CRYPTO_AKCIPHER_RSA:
> +        asym_info->u.rsa.padding_algo =
> +            ldl_le_p(&sess_req->para.u.rsa.padding_algo);
> +        asym_info->u.rsa.hash_algo =
> +            ldl_le_p(&sess_req->para.u.rsa.hash_algo);
> +        break;
> +
> +    /* TODO DSA&ECDSA handling */
> +
> +    default:
> +        return -VIRTIO_CRYPTO_ERR;
> +    }
> +
> +    queue_index = virtio_crypto_vq2q(queue_id);
> +    session_id = cryptodev_backend_create_session(vcrypto->cryptodev, &info,
> +                     queue_index, &local_err);
> +    if (session_id < 0) {
> +        if (local_err) {
> +            error_report_err(local_err);
> +        }
> +        return -VIRTIO_CRYPTO_ERR;
> +    }
> +
> +    return session_id;
> +}
> +
>  static uint8_t
>  virtio_crypto_handle_close_session(VirtIOCrypto *vcrypto,
>           struct virtio_crypto_destroy_session_req *close_sess_req,
> @@ -195,7 +262,7 @@ virtio_crypto_handle_close_session(VirtIOCrypto *vcrypto,
>      session_id = ldq_le_p(&close_sess_req->session_id);
>      DPRINTF("close session, id=%" PRIu64 "\n", session_id);
>  
> -    ret = cryptodev_backend_sym_close_session(
> +    ret = cryptodev_backend_close_session(
>                vcrypto->cryptodev, session_id, queue_id, &local_err);
>      if (ret == 0) {
>          status = VIRTIO_CRYPTO_OK;
> @@ -260,13 +327,22 @@ static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
>          opcode = ldl_le_p(&ctrl.header.opcode);
>          queue_id = ldl_le_p(&ctrl.header.queue_id);
>  
> +        memset(&input, 0, sizeof(input));
>          switch (opcode) {
>          case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION:
> -            memset(&input, 0, sizeof(input));
>              session_id = virtio_crypto_create_sym_session(vcrypto,
>                               &ctrl.u.sym_create_session,
>                               queue_id, opcode,
>                               out_iov, out_num);
> +            goto check_session;
> +
> +        case VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION:
> +            session_id = virtio_crypto_create_asym_session(vcrypto,
> +                             &ctrl.u.akcipher_create_session,
> +                             queue_id, opcode,
> +                             out_iov, out_num);
> +
> +check_session:
>              /* Serious errors, need to reset virtio crypto device */
>              if (session_id == -EFAULT) {
>                  virtqueue_detach_element(vq, elem, 0);
> @@ -290,10 +366,12 @@ static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
>              virtqueue_push(vq, elem, sizeof(input));
>              virtio_notify(vdev, vq);
>              break;
> +
>          case VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION:
>          case VIRTIO_CRYPTO_HASH_DESTROY_SESSION:
>          case VIRTIO_CRYPTO_MAC_DESTROY_SESSION:
>          case VIRTIO_CRYPTO_AEAD_DESTROY_SESSION:
> +        case VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION:
>              status = virtio_crypto_handle_close_session(vcrypto,
>                     &ctrl.u.destroy_session, queue_id);
>              /* The status only occupy one byte, we can directly use it */
> @@ -311,7 +389,6 @@ static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
>          case VIRTIO_CRYPTO_AEAD_CREATE_SESSION:
>          default:
>              error_report("virtio-crypto unsupported ctrl opcode: %d", opcode);
> -            memset(&input, 0, sizeof(input));
>              stl_le_p(&input.status, VIRTIO_CRYPTO_NOTSUPP);
>              s = iov_from_buf(in_iov, in_num, 0, &input, sizeof(input));
>              if (unlikely(s != sizeof(input))) {
> @@ -339,28 +416,39 @@ static void virtio_crypto_init_request(VirtIOCrypto *vcrypto, VirtQueue *vq,
>      req->in_num = 0;
>      req->in_len = 0;
>      req->flags = CRYPTODEV_BACKEND_ALG__MAX;
> -    req->u.sym_op_info = NULL;
> +    memset(&req->op_info, 0x00, sizeof(req->op_info));
>  }
>  
>  static void virtio_crypto_free_request(VirtIOCryptoReq *req)
>  {
> -    if (req) {
> -        if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
> -            size_t max_len;
> -            CryptoDevBackendSymOpInfo *op_info = req->u.sym_op_info;
> -
> -            max_len = op_info->iv_len +
> -                      op_info->aad_len +
> -                      op_info->src_len +
> -                      op_info->dst_len +
> -                      op_info->digest_result_len;
> -
> -            /* Zeroize and free request data structure */
> -            memset(op_info, 0, sizeof(*op_info) + max_len);
> +    if (!req) {
> +        return;
> +    }
> +
> +    if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
> +        size_t max_len;
> +        CryptoDevBackendSymOpInfo *op_info = req->op_info.u.sym_op_info;
> +
> +        max_len = op_info->iv_len +
> +                  op_info->aad_len +
> +                  op_info->src_len +
> +                  op_info->dst_len +
> +                  op_info->digest_result_len;
> +
> +        /* Zeroize and free request data structure */
> +        memset(op_info, 0, sizeof(*op_info) + max_len);
> +        g_free(op_info);
> +    } else if (req->flags == CRYPTODEV_BACKEND_ALG_ASYM) {
> +        CryptoDevBackendAsymOpInfo *op_info = req->op_info.u.asym_op_info;
> +        if (op_info) {
> +            g_free(op_info->src);
> +            g_free(op_info->dst);
> +            memset(op_info, 0, sizeof(*op_info));
>              g_free(op_info);
>          }
> -        g_free(req);
>      }
> +
> +    g_free(req);
>  }
>  
>  static void
> @@ -397,6 +485,35 @@ virtio_crypto_sym_input_data_helper(VirtIODevice *vdev,
>      }
>  }
>  
> +static void
> +virtio_crypto_akcipher_input_data_helper(VirtIODevice *vdev,
> +        VirtIOCryptoReq *req, int32_t status,
> +        CryptoDevBackendAsymOpInfo *asym_op_info)
> +{
> +    size_t s, len;
> +
> +    if (status != VIRTIO_CRYPTO_OK) {
> +        return;
> +    }
> +
> +    len = asym_op_info->dst_len;
> +    if (!len) {
> +        return;
> +    }
> +
> +    s = iov_from_buf(req->in_iov, req->in_num, 0, asym_op_info->dst, len);
> +    if (s != len) {
> +        virtio_error(vdev, "virtio-crypto asym dest data incorrect");
> +        return;
> +    }
> +
> +    iov_discard_front(&req->in_iov, &req->in_num, len);
> +
> +    /* For akcipher, dst_len may be changed after operation */
> +    req->in_len = sizeof(struct virtio_crypto_inhdr) + asym_op_info->dst_len;
> +}
> +
> +
>  static void virtio_crypto_req_complete(VirtIOCryptoReq *req, uint8_t status)
>  {
>      VirtIOCrypto *vcrypto = req->vcrypto;
> @@ -404,7 +521,10 @@ static void virtio_crypto_req_complete(VirtIOCryptoReq *req, uint8_t status)
>  
>      if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) {
>          virtio_crypto_sym_input_data_helper(vdev, req, status,
> -                                            req->u.sym_op_info);
> +                                            req->op_info.u.sym_op_info);
> +    } else if (req->flags == CRYPTODEV_BACKEND_ALG_ASYM) {
> +        virtio_crypto_akcipher_input_data_helper(vdev, req, status,
> +                                             req->op_info.u.asym_op_info);
>      }
>      stb_p(&req->in->status, status);
>      virtqueue_push(req->vq, &req->elem, req->in_len);
> @@ -543,41 +663,100 @@ err:
>  static int
>  virtio_crypto_handle_sym_req(VirtIOCrypto *vcrypto,
>                 struct virtio_crypto_sym_data_req *req,
> -               CryptoDevBackendSymOpInfo **sym_op_info,
> +               CryptoDevBackendOpInfo *op_info,
>                 struct iovec *iov, unsigned int out_num)
>  {
>      VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
> +    CryptoDevBackendSymOpInfo *sym_op_info;
>      uint32_t op_type;
> -    CryptoDevBackendSymOpInfo *op_info;
>  
>      op_type = ldl_le_p(&req->op_type);
> -
>      if (op_type == VIRTIO_CRYPTO_SYM_OP_CIPHER) {
> -        op_info = virtio_crypto_sym_op_helper(vdev, &req->u.cipher.para,
> +        sym_op_info = virtio_crypto_sym_op_helper(vdev, &req->u.cipher.para,
>                                                NULL, iov, out_num);
> -        if (!op_info) {
> +        if (!sym_op_info) {
>              return -EFAULT;
>          }
> -        op_info->op_type = op_type;
>      } else if (op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) {
> -        op_info = virtio_crypto_sym_op_helper(vdev, NULL,
> +        sym_op_info = virtio_crypto_sym_op_helper(vdev, NULL,
>                                                &req->u.chain.para,
>                                                iov, out_num);
> -        if (!op_info) {
> +        if (!sym_op_info) {
>              return -EFAULT;
>          }
> -        op_info->op_type = op_type;
>      } else {
>          /* VIRTIO_CRYPTO_SYM_OP_NONE */
>          error_report("virtio-crypto unsupported cipher type");
>          return -VIRTIO_CRYPTO_NOTSUPP;
>      }
>  
> -    *sym_op_info = op_info;
> +    sym_op_info->op_type = op_type;
> +    op_info->u.sym_op_info = sym_op_info;
>  
>      return 0;
>  }
>  
> +static int
> +virtio_crypto_handle_asym_req(VirtIOCrypto *vcrypto,
> +               struct virtio_crypto_akcipher_data_req *req,
> +               CryptoDevBackendOpInfo *op_info,
> +               struct iovec *iov, unsigned int out_num)
> +{
> +    VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto);
> +    CryptoDevBackendAsymOpInfo *asym_op_info;
> +    uint32_t src_len;
> +    uint32_t dst_len;
> +    uint32_t len;
> +    uint8_t *src = NULL;
> +    uint8_t *dst = NULL;
> +
> +    asym_op_info = g_malloc0(sizeof(CryptoDevBackendAsymOpInfo));
> +    src_len = ldl_le_p(&req->para.src_data_len);
> +    dst_len = ldl_le_p(&req->para.dst_data_len);
> +
> +    if (src_len > 0) {
> +        src = g_malloc0(src_len);
> +        len = iov_to_buf(iov, out_num, 0, src, src_len);
> +        if (unlikely(len != src_len)) {
> +            virtio_error(vdev, "virtio-crypto asym src data incorrect"
> +                         "expected %u, actual %u", src_len, len);
> +            goto err;
> +        }
> +
> +        iov_discard_front(&iov, &out_num, src_len);
> +    }
> +
> +    if (dst_len > 0) {
> +        dst = g_malloc0(dst_len);
> +
> +        if (op_info->op_code == VIRTIO_CRYPTO_AKCIPHER_VERIFY) {
> +            len = iov_to_buf(iov, out_num, 0, dst, dst_len);
> +            if (unlikely(len != dst_len)) {
> +                virtio_error(vdev, "virtio-crypto asym dst data incorrect"
> +                             "expected %u, actual %u", dst_len, len);
> +                goto err;
> +            }
> +
> +            iov_discard_front(&iov, &out_num, dst_len);
> +        }
> +    }
> +
> +    asym_op_info->src_len = src_len;
> +    asym_op_info->dst_len = dst_len;
> +    asym_op_info->src = src;
> +    asym_op_info->dst = dst;
> +    op_info->u.asym_op_info = asym_op_info;
> +
> +    return 0;
> +
> + err:
> +    g_free(asym_op_info);
> +    g_free(src);
> +    g_free(dst);
> +
> +    return -EFAULT;
> +}
> +
>  static int
>  virtio_crypto_handle_request(VirtIOCryptoReq *request)
>  {
> @@ -595,8 +774,7 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
>      unsigned out_num;
>      uint32_t opcode;
>      uint8_t status = VIRTIO_CRYPTO_ERR;
> -    uint64_t session_id;
> -    CryptoDevBackendSymOpInfo *sym_op_info = NULL;
> +    CryptoDevBackendOpInfo *op_info = &request->op_info;
>      Error *local_err = NULL;
>  
>      if (elem->out_num < 1 || elem->in_num < 1) {
> @@ -639,15 +817,28 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
>      request->in_iov = in_iov;
>  
>      opcode = ldl_le_p(&req.header.opcode);
> -    session_id = ldq_le_p(&req.header.session_id);
> +    op_info->session_id = ldq_le_p(&req.header.session_id);
> +    op_info->op_code = opcode;
>  
>      switch (opcode) {
>      case VIRTIO_CRYPTO_CIPHER_ENCRYPT:
>      case VIRTIO_CRYPTO_CIPHER_DECRYPT:
> +        op_info->algtype = request->flags = CRYPTODEV_BACKEND_ALG_SYM;
>          ret = virtio_crypto_handle_sym_req(vcrypto,
> -                         &req.u.sym_req,
> -                         &sym_op_info,
> +                         &req.u.sym_req, op_info,
> +                         out_iov, out_num);
> +        goto check_result;
> +
> +    case VIRTIO_CRYPTO_AKCIPHER_ENCRYPT:
> +    case VIRTIO_CRYPTO_AKCIPHER_DECRYPT:
> +    case VIRTIO_CRYPTO_AKCIPHER_SIGN:
> +    case VIRTIO_CRYPTO_AKCIPHER_VERIFY:
> +        op_info->algtype = request->flags = CRYPTODEV_BACKEND_ALG_ASYM;
> +        ret = virtio_crypto_handle_asym_req(vcrypto,
> +                         &req.u.akcipher_req, op_info,
>                           out_iov, out_num);
> +
> +check_result:
>          /* Serious errors, need to reset virtio crypto device */
>          if (ret == -EFAULT) {
>              return -1;
> @@ -655,11 +846,8 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
>              virtio_crypto_req_complete(request, VIRTIO_CRYPTO_NOTSUPP);
>              virtio_crypto_free_request(request);
>          } else {
> -            sym_op_info->session_id = session_id;
>  
>              /* Set request's parameter */
> -            request->flags = CRYPTODEV_BACKEND_ALG_SYM;
> -            request->u.sym_op_info = sym_op_info;
>              ret = cryptodev_backend_crypto_operation(vcrypto->cryptodev,
>                                      request, queue_index, &local_err);
>              if (ret < 0) {
> @@ -674,6 +862,7 @@ virtio_crypto_handle_request(VirtIOCryptoReq *request)
>              virtio_crypto_free_request(request);
>          }
>          break;
> +
>      case VIRTIO_CRYPTO_HASH:
>      case VIRTIO_CRYPTO_MAC:
>      case VIRTIO_CRYPTO_AEAD_ENCRYPT:
> @@ -779,6 +968,7 @@ static void virtio_crypto_init_config(VirtIODevice *vdev)
>      vcrypto->conf.mac_algo_l = vcrypto->conf.cryptodev->conf.mac_algo_l;
>      vcrypto->conf.mac_algo_h = vcrypto->conf.cryptodev->conf.mac_algo_h;
>      vcrypto->conf.aead_algo = vcrypto->conf.cryptodev->conf.aead_algo;
> +    vcrypto->conf.akcipher_algo = vcrypto->conf.cryptodev->conf.akcipher_algo;
>      vcrypto->conf.max_cipher_key_len =
>                    vcrypto->conf.cryptodev->conf.max_cipher_key_len;
>      vcrypto->conf.max_auth_key_len =
> @@ -891,6 +1081,7 @@ static void virtio_crypto_get_config(VirtIODevice *vdev, uint8_t *config)
>      stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len);
>      stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len);
>      stq_le_p(&crypto_cfg.max_size, c->conf.max_size);
> +    stl_le_p(&crypto_cfg.akcipher_algo, c->conf.akcipher_algo);
>  
>      memcpy(config, &crypto_cfg, c->config_size);
>  }
> diff --git a/include/hw/virtio/virtio-crypto.h b/include/hw/virtio/virtio-crypto.h
> index a2228d7b2e..348749f5d5 100644
> --- a/include/hw/virtio/virtio-crypto.h
> +++ b/include/hw/virtio/virtio-crypto.h
> @@ -50,6 +50,7 @@ typedef struct VirtIOCryptoConf {
>      uint32_t mac_algo_l;
>      uint32_t mac_algo_h;
>      uint32_t aead_algo;
> +    uint32_t akcipher_algo;
>  
>      /* Maximum length of cipher key */
>      uint32_t max_cipher_key_len;
> @@ -71,9 +72,7 @@ typedef struct VirtIOCryptoReq {
>      size_t in_len;
>      VirtQueue *vq;
>      struct VirtIOCrypto *vcrypto;
> -    union {
> -        CryptoDevBackendSymOpInfo *sym_op_info;
> -    } u;
> +    CryptoDevBackendOpInfo op_info;
>  } VirtIOCryptoReq;
>  
>  typedef struct VirtIOCryptoQueue {
> diff --git a/include/sysemu/cryptodev.h b/include/sysemu/cryptodev.h
> index f4d4057d4d..37c3a360fd 100644
> --- a/include/sysemu/cryptodev.h
> +++ b/include/sysemu/cryptodev.h
> @@ -50,13 +50,13 @@ typedef struct CryptoDevBackendClient
>  
>  enum CryptoDevBackendAlgType {
>      CRYPTODEV_BACKEND_ALG_SYM,
> +    CRYPTODEV_BACKEND_ALG_ASYM,
>      CRYPTODEV_BACKEND_ALG__MAX,
>  };
>  
>  /**
>   * CryptoDevBackendSymSessionInfo:
>   *
> - * @op_code: operation code (refer to virtio_crypto.h)
>   * @cipher_alg: algorithm type of CIPHER
>   * @key_len: byte length of cipher key
>   * @hash_alg: algorithm type of HASH/MAC
> @@ -74,7 +74,6 @@ enum CryptoDevBackendAlgType {
>   */
>  typedef struct CryptoDevBackendSymSessionInfo {
>      /* corresponding with virtio crypto spec */
> -    uint32_t op_code;
>      uint32_t cipher_alg;
>      uint32_t key_len;
>      uint32_t hash_alg;
> @@ -89,11 +88,36 @@ typedef struct CryptoDevBackendSymSessionInfo {
>      uint8_t *auth_key;
>  } CryptoDevBackendSymSessionInfo;
>  
> +/**
> + * CryptoDevBackendAsymSessionInfo:
> + */
> +typedef struct CryptoDevBackendRsaPara {
> +    uint32_t padding_algo;
> +    uint32_t hash_algo;
> +} CryptoDevBackendRsaPara;
> +
> +typedef struct CryptoDevBackendAsymSessionInfo {
> +    /* corresponding with virtio crypto spec */
> +    uint32_t algo;
> +    uint32_t keytype;
> +    uint32_t keylen;
> +    uint8_t *key;
> +    union {
> +        CryptoDevBackendRsaPara rsa;
> +    } u;
> +} CryptoDevBackendAsymSessionInfo;
> +
> +typedef struct CryptoDevBackendSessionInfo {
> +    uint32_t op_code;
> +    union {
> +        CryptoDevBackendSymSessionInfo sym_sess_info;
> +        CryptoDevBackendAsymSessionInfo asym_sess_info;
> +    } u;
> +} CryptoDevBackendSessionInfo;
> +
>  /**
>   * CryptoDevBackendSymOpInfo:
>   *
> - * @session_id: session index which was previously
> - *              created by cryptodev_backend_sym_create_session()
>   * @aad_len: byte length of additional authenticated data
>   * @iv_len: byte length of initialization vector or counter
>   * @src_len: byte length of source data
> @@ -119,7 +143,6 @@ typedef struct CryptoDevBackendSymSessionInfo {
>   *
>   */
>  typedef struct CryptoDevBackendSymOpInfo {
> -    uint64_t session_id;
>      uint32_t aad_len;
>      uint32_t iv_len;
>      uint32_t src_len;
> @@ -138,6 +161,33 @@ typedef struct CryptoDevBackendSymOpInfo {
>      uint8_t data[];
>  } CryptoDevBackendSymOpInfo;
>  
> +
> +/**
> + * CryptoDevBackendAsymOpInfo:
> + *
> + * @src_len: byte length of source data
> + * @dst_len: byte length of destination data
> + * @src: point to the source data
> + * @dst: point to the destination data
> + *
> + */
> +typedef struct CryptoDevBackendAsymOpInfo {
> +    uint32_t src_len;
> +    uint32_t dst_len;
> +    uint8_t *src;
> +    uint8_t *dst;
> +} CryptoDevBackendAsymOpInfo;
> +
> +typedef struct CryptoDevBackendOpInfo {
> +    enum CryptoDevBackendAlgType algtype;
> +    uint32_t op_code;
> +    uint64_t session_id;
> +    union {
> +        CryptoDevBackendSymOpInfo *sym_op_info;
> +        CryptoDevBackendAsymOpInfo *asym_op_info;
> +    } u;
> +} CryptoDevBackendOpInfo;
> +
>  struct CryptoDevBackendClass {
>      ObjectClass parent_class;
>  
> @@ -145,13 +195,13 @@ struct CryptoDevBackendClass {
>      void (*cleanup)(CryptoDevBackend *backend, Error **errp);
>  
>      int64_t (*create_session)(CryptoDevBackend *backend,
> -                       CryptoDevBackendSymSessionInfo *sess_info,
> +                       CryptoDevBackendSessionInfo *sess_info,
>                         uint32_t queue_index, Error **errp);
>      int (*close_session)(CryptoDevBackend *backend,
>                             uint64_t session_id,
>                             uint32_t queue_index, Error **errp);
> -    int (*do_sym_op)(CryptoDevBackend *backend,
> -                     CryptoDevBackendSymOpInfo *op_info,
> +    int (*do_op)(CryptoDevBackend *backend,
> +                     CryptoDevBackendOpInfo *op_info,
>                       uint32_t queue_index, Error **errp);
>  };
>  
> @@ -190,6 +240,7 @@ struct CryptoDevBackendConf {
>      uint32_t mac_algo_l;
>      uint32_t mac_algo_h;
>      uint32_t aead_algo;
> +    uint32_t akcipher_algo;
>      /* Maximum length of cipher key */
>      uint32_t max_cipher_key_len;
>      /* Maximum length of authenticated key */
> @@ -247,34 +298,34 @@ void cryptodev_backend_cleanup(
>             Error **errp);
>  
>  /**
> - * cryptodev_backend_sym_create_session:
> + * cryptodev_backend_create_session:
>   * @backend: the cryptodev backend object
>   * @sess_info: parameters needed by session creating
>   * @queue_index: queue index of cryptodev backend client
>   * @errp: pointer to a NULL-initialized error object
>   *
> - * Create a session for symmetric algorithms
> + * Create a session for symmetric/symmetric algorithms
>   *
>   * Returns: session id on success, or -1 on error
>   */
> -int64_t cryptodev_backend_sym_create_session(
> +int64_t cryptodev_backend_create_session(
>             CryptoDevBackend *backend,
> -           CryptoDevBackendSymSessionInfo *sess_info,
> +           CryptoDevBackendSessionInfo *sess_info,
>             uint32_t queue_index, Error **errp);
>  
>  /**
> - * cryptodev_backend_sym_close_session:
> + * cryptodev_backend_close_session:
>   * @backend: the cryptodev backend object
>   * @session_id: the session id
>   * @queue_index: queue index of cryptodev backend client
>   * @errp: pointer to a NULL-initialized error object
>   *
> - * Close a session for symmetric algorithms which was previously
> - * created by cryptodev_backend_sym_create_session()
> + * Close a session for which was previously
> + * created by cryptodev_backend_create_session()
>   *
>   * Returns: 0 on success, or Negative on error
>   */
> -int cryptodev_backend_sym_close_session(
> +int cryptodev_backend_close_session(
>             CryptoDevBackend *backend,
>             uint64_t session_id,
>             uint32_t queue_index, Error **errp);
> -- 
> 2.20.1

_______________________________________________
Virtualization mailing list
Virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/virtualization



[Index of Archives]     [KVM Development]     [Libvirt Development]     [Libvirt Users]     [CentOS Virtualization]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux